Practice Exams:

Network Appliance NS0-165 Dumps

EXAM: NetApp Certified Data Administrator, ONTAP
Verified By Experts
Premium Bundle
$49.99

NS0-165 Premium ETE File


  • Premium File 60 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Network Appliance NS0-165 Practice Test 62

Question 610

A storage operations lead considers: A SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. Which response and evidence should be linked?

  1. Action: Create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. Validation: Check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
  2. Action: Choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. Validation: Test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
  3. Action: Use supported ONTAP S3 API methods for object data and avoid assuming POSIX atomic rename or SMB lock behavior exists for object workloads. Validation: Upload and read a synthetic object through the intended API and test the application's required update behavior before rollout.
  4. Action: Install and configure supported host multipath software and ONTAP target paths according to ALUA or applicable asymmetric access behavior. Validation: Run a controlled failure of one SAN fabric path and verify the host keeps its LUN available through a supported alternate path.

Explanation

Correct Answer

B:

The situation is that a SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. Choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. Validation: Test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric. The action and test belong together because NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.

Incorrect Answers

A:

“use igroups and lun mapping for explicit host access” evaluates a different intervention. The appropriate action is to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. To confirm, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.

C:

That action-and-evidence pair concerns “clarify s3 object operations versus ONTAP nas file semantics”, not this decision. The appropriate action is to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. To confirm, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.

D:

The proposed pair focuses on “design alua and host multipathing for resilient san access” instead. The appropriate action is to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. To confirm, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.

Question 611

An iSCSI client has active sessions to ONTAP but its assigned LUN does not show in the operating system. Which action best addresses this requirement?

  1. Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents.
  2. Compare host multipath path states, ALUA priorities and switch errors when SAN I/O switches between paths unexpectedly.
  3. Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings.
  4. Check target portal routing, initiator IQN, iSCSI service state and CHAP settings in a controlled sequence.

Explanation

Correct Answer

C:

Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete. To verify, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

Incorrect Answers

A:

This alternative focuses on “diagnose fc path visibility using fabric and switch evidence” instead of the required outcome. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

B:

That choice concerns “investigate mpio path thrashing before changing storage capacity”, not the immediate requirement. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

D:

“troubleshoot iscsi discovery and authentication separately” is related to another task, not the failure shown here. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Question 612

A NetApp storage engineer considers: An iSCSI client has active sessions to ONTAP but its assigned LUN does not show in the operating system. Which underlying principle applies?

  1. Network reachability, target discovery, session authentication and block mapping are separate stages of iSCSI setup.
  2. A writable LUN may be online while its guest filesystem has errors; restoring transport cannot repair corrupted filesystem metadata.
  3. Path selection instability can produce latency without any shortage of aggregate space or backend disk performance.
  4. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Explanation

Correct Answer

D:

A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete. This supports the decision to verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings.

Incorrect Answers

A:

“troubleshoot iscsi discovery and authentication separately” explains a different mechanism. Here, a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

B:

That statement concerns “distinguish host filesystem corruption from san transport faults” rather than the cause in this case. Here, a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

C:

The principle behind “investigate mpio path thrashing before changing storage capacity” is not the one being tested. Here, a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Question 613

An iSCSI client has active sessions to ONTAP but its assigned LUN does not show in the operating system. What should the team examine before accepting the result?

  1. Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.
  2. Use a test initiator to confirm TCP reachability, discovery, authenticated login and mapped LUN visibility in order.
  3. Record host path transitions and ONTAP target health, then run a supported single-path fault test after correction.
  4. Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

Explanation

Correct Answer

A:

Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan. It is the relevant test because a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Incorrect Answers

B:

This evidence addresses “troubleshoot iscsi discovery and authentication separately” instead of confirming the repair. To check this result, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

C:

“investigate mpio path thrashing before changing storage capacity” would verify a different part of the system. To check this result, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

D:

That test concerns “diagnose fc path visibility using fabric and switch evidence”, not the requested outcome. To check this result, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

Question 614

An iSCSI client has active sessions to ONTAP but its assigned LUN does not show in the operating system. The proposed shortcut is: "Restart every storage node because one server does not see a LUN that was never mapped to its initiator identity." Which failure is most likely?

  1. The underlying client discovery issue remains while application data may be destroyed.
  2. The host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.
  3. The action may overwrite recoverable data while an application-level filesystem issue persists.
  4. The host continues experiencing I/O stalls while a larger disk allocation wastes resources.

Explanation

Correct Answer

B:

The host remains without its disk while a disruptive cluster change fails to address the actual mapping issue. The shortcut is unsafe because a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Incorrect Answers

A:

The alternative risk relates to “The underlying client discovery issue remains while application data may be destroyed”, not the stated mistake. Here, the host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.

C:

That consequence concerns “The action may overwrite recoverable data while an application-level filesystem issue persists”, which is a different failure. Here, the host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.

D:

“The host continues experiencing I/O stalls while a larger disk allocation wastes resources” does not describe the result of this shortcut. Here, the host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.

Question 615

For this case—An iSCSI client has active sessions to ONTAP but its assigned LUN does not show in the operating system.—which implementation and acceptance check are correctly paired?

  1. Action: Compare host multipath path states, ALUA priorities and switch errors when SAN I/O switches between paths unexpectedly. Validation: Record host path transitions and ONTAP target health, then run a supported single-path fault test after correction.
  2. Action: Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. Validation: Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.
  3. Action: Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. Validation: Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.
  4. Action: Check target portal routing, initiator IQN, iSCSI service state and CHAP settings in a controlled sequence. Validation: Use a test initiator to confirm TCP reachability, discovery, authenticated login and mapped LUN visibility in order.

Explanation

Correct Answer

C:

Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. Validation: Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan. The action and test belong together because a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Incorrect Answers

A:

The linked action and check for “investigate mpio path thrashing before changing storage capacity” would not resolve this case. The appropriate action is to verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. To confirm, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

B:

That action-and-evidence pair concerns “diagnose fc path visibility using fabric and switch evidence”, not this decision. The appropriate action is to verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. To confirm, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

D:

“troubleshoot iscsi discovery and authentication separately” evaluates a different intervention. The appropriate action is to verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. To confirm, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

Question 616

A SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. Which implementation or design choice most directly mitigates the stated issue?

  1. Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents.
  2. Compare host multipath path states, ALUA priorities and switch errors when SAN I/O switches between paths unexpectedly.
  3. Separate host OS filesystem diagnostics from LUN connectivity and storage hardware health before choosing corrective action.
  4. Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings.

Explanation

Correct Answer

D:

The situation is that a SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete. To verify, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

Incorrect Answers

A:

That choice concerns “diagnose fc path visibility using fabric and switch evidence”, not the immediate requirement. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

B:

The proposed action addresses “investigate mpio path thrashing before changing storage capacity” rather than the problem described. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

C:

“distinguish host filesystem corruption from san transport faults” is related to another task, not the failure shown here. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Question 617

A SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. Which technical explanation most directly supports the right approach?

  1. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.
  2. Path selection instability can produce latency without any shortage of aggregate space or backend disk performance.
  3. Network reachability, target discovery, session authentication and block mapping are separate stages of iSCSI setup.
  4. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Explanation

Correct Answer

A:

The situation is that a SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete. This supports the decision to verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings.

Incorrect Answers

B:

The situation is that a SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. The principle behind “investigate mpio path thrashing before changing storage capacity” is not the one being tested. Here, a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

C:

“troubleshoot iscsi discovery and authentication separately” describes another technical distinction. Here, a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

D:

“diagnose fc path visibility using fabric and switch evidence” explains a different mechanism. Here, a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Question 618

For this situation—A SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup.—which check provides the strongest verification?

  1. Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.
  2. Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.
  3. Check SAN device consistency and host filesystem diagnostic output on an isolated test volume, then follow an approved recovery workflow.
  4. Use a test initiator to confirm TCP reachability, discovery, authenticated login and mapped LUN visibility in order.

Explanation

Correct Answer

B:

The situation is that a SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan. It is the relevant test because a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Incorrect Answers

A:

This evidence addresses “diagnose fc path visibility using fabric and switch evidence” instead of confirming the repair. To check this result, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

C:

That test concerns “distinguish host filesystem corruption from san transport faults”, not the requested outcome. To check this result, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

D:

The proposed check is relevant to “troubleshoot iscsi discovery and authentication separately”, but not sufficient here. To check this result, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

Question 619

A SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. If the team does the following—"Restart every storage node because one server does not see a LUN that was never mapped to its initiator identity."—what could go wrong?

  1. The action may overwrite recoverable data while an application-level filesystem issue persists.
  2. Storage remains unavailable and the security posture is unnecessarily weakened.
  3. The host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.
  4. The underlying client discovery issue remains while application data may be destroyed.

Explanation

Correct Answer

C:

The situation is that a SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. The host remains without its disk while a disruptive cluster change fails to address the actual mapping issue. The shortcut is unsafe because a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Incorrect Answers

A:

“The action may overwrite recoverable data while an application-level filesystem issue persists” can arise elsewhere, but it is not the most direct risk here. Here, the host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.

B:

That consequence concerns “Storage remains unavailable and the security posture is unnecessarily weakened”, which is a different failure. Here, the host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.

D:

The situation is that a SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. The alternative risk relates to “The underlying client discovery issue remains while application data may be destroyed”, not the stated mistake. Here, the host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.

Question 620

A SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. Which action and validation evidence belong together?

  1. Action: Separate host OS filesystem diagnostics from LUN connectivity and storage hardware health before choosing corrective action. Validation: Check SAN device consistency and host filesystem diagnostic output on an isolated test volume, then follow an approved recovery workflow.
  2. Action: Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. Validation: Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.
  3. Action: Compare host multipath path states, ALUA priorities and switch errors when SAN I/O switches between paths unexpectedly. Validation: Record host path transitions and ONTAP target health, then run a supported single-path fault test after correction.
  4. Action: Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. Validation: Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

Explanation

Correct Answer

D:

The situation is that a SAN support engineer finds the expected FC target online but the server's WWPN is absent from its igroup. Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. Validation: Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan. The action and test belong together because a host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Incorrect Answers

A:

That action-and-evidence pair concerns “distinguish host filesystem corruption from san transport faults”, not this decision. The appropriate action is to verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. To confirm, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

B:

The proposed pair focuses on “diagnose fc path visibility using fabric and switch evidence” instead. The appropriate action is to verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. To confirm, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

C:

“investigate mpio path thrashing before changing storage capacity” evaluates a different intervention. The appropriate action is to verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. To confirm, inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests