Practice Exams:

Network Appliance NS0-165 Dumps

EXAM: NetApp Certified Data Administrator, ONTAP
Verified By Experts
Premium Bundle
$49.99

NS0-165 Premium ETE File


  • Premium File 60 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Network Appliance NS0-165 Practice Test 64

Question 630

For this case—A new server uses an outdated target portal IP and reports no discovered iSCSI targets.—which implementation and acceptance check are correctly paired?

  1. Action: Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. Validation: Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.
  2. Action: Check target portal routing, initiator IQN, iSCSI service state and CHAP settings in a controlled sequence. Validation: Use a test initiator to confirm TCP reachability, discovery, authenticated login and mapped LUN visibility in order.
  3. Action: Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. Validation: Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.
  4. Action: Separate host OS filesystem diagnostics from LUN connectivity and storage hardware health before choosing corrective action. Validation: Check SAN device consistency and host filesystem diagnostic output on an isolated test volume, then follow an approved recovery workflow.

Explanation

Correct Answer

B:

The situation is that a new server uses an outdated target portal IP and reports no discovered iSCSI targets. Check target portal routing, initiator IQN, iSCSI service state and CHAP settings in a controlled sequence. Validation: Use a test initiator to confirm TCP reachability, discovery, authenticated login and mapped LUN visibility in order. The action and test belong together because network reachability, target discovery, session authentication and block mapping are separate stages of iSCSI setup.

Incorrect Answers

A:

“diagnose fc path visibility using fabric and switch evidence” evaluates a different intervention. The appropriate action is to check target portal routing, initiator IQN, iSCSI service state and CHAP settings in a controlled sequence. To confirm, use a test initiator to confirm TCP reachability, discovery, authenticated login and mapped LUN visibility in order.

C:

That action-and-evidence pair concerns “diagnose san lun missing from igroup or map”, not this decision. The appropriate action is to check target portal routing, initiator IQN, iSCSI service state and CHAP settings in a controlled sequence. To confirm, use a test initiator to confirm TCP reachability, discovery, authenticated login and mapped LUN visibility in order.

D:

The proposed pair focuses on “distinguish host filesystem corruption from san transport faults” instead. The appropriate action is to check target portal routing, initiator IQN, iSCSI service state and CHAP settings in a controlled sequence. To confirm, use a test initiator to confirm TCP reachability, discovery, authenticated login and mapped LUN visibility in order.

Question 631

A server's HBA reports a healthy link but its ONTAP target WWPN is absent from the fabric name server. Which implementation or design choice most directly mitigates the stated issue?

  1. Compare host multipath path states, ALUA priorities and switch errors when SAN I/O switches between paths unexpectedly.
  2. Separate host OS filesystem diagnostics from LUN connectivity and storage hardware health before choosing corrective action.
  3. Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents.
  4. Configure a supported FC target and switch zoning design that permits intended initiators to see the appropriate ONTAP target ports.

Explanation

Correct Answer

C:

Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation. To verify, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

Incorrect Answers

A:

This alternative focuses on “investigate mpio path thrashing before changing storage capacity” instead of the required outcome. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

B:

That choice concerns “distinguish host filesystem corruption from san transport faults”, not the immediate requirement. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

D:

“plan fibre channel zoning and ONTAP target wwpn access” is related to another task, not the failure shown here. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Question 632

A server's HBA reports a healthy link but its ONTAP target WWPN is absent from the fabric name server. Which technical explanation most directly supports the right approach?

  1. Network reachability, target discovery, session authentication and block mapping are separate stages of iSCSI setup.
  2. Slow NAS application responses can originate in authentication, client locking or network transport as well as backend storage.
  3. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.
  4. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Explanation

Correct Answer

D:

A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation. This supports the decision to review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents.

Incorrect Answers

A:

“troubleshoot iscsi discovery and authentication separately” explains a different mechanism. Here, a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

B:

That statement concerns “troubleshoot nas throughput through protocol and host telemetry” rather than the cause in this case. Here, a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

C:

The principle behind “diagnose san lun missing from igroup or map” is not the one being tested. Here, a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Question 633

For this situation—A server's HBA reports a healthy link but its ONTAP target WWPN is absent from the fabric name server.—which check provides the strongest verification?

  1. Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.
  2. Check SAN device consistency and host filesystem diagnostic output on an isolated test volume, then follow an approved recovery workflow.
  3. Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.
  4. Authenticate a controlled domain test identity and inspect SMB status plus relevant AD and ONTAP logs.

Explanation

Correct Answer

A:

Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan. It is the relevant test because a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Incorrect Answers

B:

This evidence addresses “distinguish host filesystem corruption from san transport faults” instead of confirming the repair. To check this result, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

C:

“diagnose san lun missing from igroup or map” would verify a different part of the system. To check this result, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

D:

That test concerns “diagnose smb authentication with ad DNS and time synchronization”, not the requested outcome. To check this result, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

Question 634

A server's HBA reports a healthy link but its ONTAP target WWPN is absent from the fabric name server. If the team does the following—"Reformat an existing production LUN to fix an initiator that cannot see its FC target ports."—what could go wrong?

  1. The host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.
  2. The underlying client discovery issue remains while application data may be destroyed.
  3. The host continues experiencing I/O stalls while a larger disk allocation wastes resources.
  4. Storage remains unavailable and the security posture is unnecessarily weakened.

Explanation

Correct Answer

B:

The underlying client discovery issue remains while application data may be destroyed. The shortcut is unsafe because a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Incorrect Answers

A:

The alternative risk relates to “The host remains without its disk while a disruptive cluster change fails to address the actual…”, not the stated mistake. Here, the underlying client discovery issue remains while application data may be destroyed.

C:

That consequence concerns “The host continues experiencing I/O stalls while a larger disk allocation wastes resources”, which is a different failure. Here, the underlying client discovery issue remains while application data may be destroyed.

D:

“Storage remains unavailable and the security posture is unnecessarily weakened” does not describe the result of this shortcut. Here, the underlying client discovery issue remains while application data may be destroyed.

Question 635

A server's HBA reports a healthy link but its ONTAP target WWPN is absent from the fabric name server. Which action and validation evidence belong together?

  1. Action: Compare NFS or SMB client retransmits, share locks, LIF traffic and aggregate latency before blaming only storage disks. Validation: Collect representative client operation latency, ONTAP volume statistics and switch counters during a controlled transfer.
  2. Action: Verify LUN state, initiator group membership, mapping and host rescan before changing unrelated storage network settings. Validation: Inspect a test igroup and LUN mapping alongside the host device list before and after a documented rescan.
  3. Action: Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. Validation: Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.
  4. Action: Compare host multipath path states, ALUA priorities and switch errors when SAN I/O switches between paths unexpectedly. Validation: Record host path transitions and ONTAP target health, then run a supported single-path fault test after correction.

Explanation

Correct Answer

C:

Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. Validation: Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan. The action and test belong together because a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Incorrect Answers

A:

The linked action and check for “troubleshoot nas throughput through protocol and host telemetry” would not resolve this case. The appropriate action is to review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. To confirm, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

B:

That action-and-evidence pair concerns “diagnose san lun missing from igroup or map”, not this decision. The appropriate action is to review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. To confirm, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

D:

“investigate mpio path thrashing before changing storage capacity” evaluates a different intervention. The appropriate action is to review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. To confirm, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

Question 636

During a NetApp ONTAP maintenance review, After switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. What is the most appropriate next decision?

  1. Choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support.
  2. Separate host OS filesystem diagnostics from LUN connectivity and storage hardware health before choosing corrective action.
  3. Check target portal routing, initiator IQN, iSCSI service state and CHAP settings in a controlled sequence.
  4. Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents.

Explanation

Correct Answer

D:

The situation is that after switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation. To verify, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

Incorrect Answers

A:

That choice concerns “validate nvme over fabrics namespace and host compatibility”, not the immediate requirement. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

B:

The proposed action addresses “distinguish host filesystem corruption from san transport faults” rather than the problem described. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

C:

“troubleshoot iscsi discovery and authentication separately” is related to another task, not the failure shown here. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Question 637

After switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. Why does the recommended approach address this particular concern?

  1. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.
  2. Network reachability, target discovery, session authentication and block mapping are separate stages of iSCSI setup.
  3. A writable LUN may be online while its guest filesystem has errors; restoring transport cannot repair corrupted filesystem metadata.
  4. A host can log in to SAN targets successfully yet discover no mapped storage because authorization is incomplete.

Explanation

Correct Answer

A:

The situation is that after switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. A missing FC target can be a fabric registration or zoning problem upstream of LUN presentation. This supports the decision to review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents.

Incorrect Answers

B:

The principle behind “troubleshoot iscsi discovery and authentication separately” is not the one being tested. Here, a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

C:

“distinguish host filesystem corruption from san transport faults” describes another technical distinction. Here, a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

D:

“diagnose san lun missing from igroup or map” explains a different mechanism. Here, a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Question 638

After switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. Which evidence best validates the proposed outcome?

  1. Test mounting from an allowed and denied synthetic client and confirm the rule match plus POSIX permissions.
  2. Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.
  3. Check SAN device consistency and host filesystem diagnostic output on an isolated test volume, then follow an approved recovery workflow.
  4. Record host path transitions and ONTAP target health, then run a supported single-path fault test after correction.

Explanation

Correct Answer

B:

The situation is that after switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan. It is the relevant test because a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Incorrect Answers

A:

This evidence addresses “troubleshoot nfs access denied through export policy and permissions” instead of confirming the repair. To check this result, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

C:

That test concerns “distinguish host filesystem corruption from san transport faults”, not the requested outcome. To check this result, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

D:

The proposed check is relevant to “investigate mpio path thrashing before changing storage capacity”, but not sufficient here. To check this result, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

Question 639

Consider this situation: After switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. A team member suggests: "Reformat an existing production LUN to fix an initiator that cannot see its FC target ports." What is the main risk?

  1. Unapproved hosts may mount sensitive volumes or access data beyond the intended consumer group.
  2. The host remains without its disk while a disruptive cluster change fails to address the actual mapping issue.
  3. The underlying client discovery issue remains while application data may be destroyed.
  4. The host continues experiencing I/O stalls while a larger disk allocation wastes resources.

Explanation

Correct Answer

C:

The situation is that after switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. The underlying client discovery issue remains while application data may be destroyed. The shortcut is unsafe because a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Incorrect Answers

A:

“Unapproved hosts may mount sensitive volumes or access data beyond the intended consumer group” can arise elsewhere, but it is not the most direct risk here. Here, the underlying client discovery issue remains while application data may be destroyed.

B:

That consequence concerns “The host remains without its disk while a disruptive cluster change fails to address the actual…”, which is a different failure. Here, the underlying client discovery issue remains while application data may be destroyed.

D:

The alternative risk relates to “The host continues experiencing I/O stalls while a larger disk allocation wastes resources”, not the stated mistake. Here, the underlying client discovery issue remains while application data may be destroyed.

Question 640

A storage operations lead considers: After switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. Which response and evidence should be linked?

  1. Action: Compare host multipath path states, ALUA priorities and switch errors when SAN I/O switches between paths unexpectedly. Validation: Record host path transitions and ONTAP target health, then run a supported single-path fault test after correction.
  2. Action: Separate host OS filesystem diagnostics from LUN connectivity and storage hardware health before choosing corrective action. Validation: Check SAN device consistency and host filesystem diagnostic output on an isolated test volume, then follow an approved recovery workflow.
  3. Action: Check ONTAP S3 service LIF reachability, TLS trust, endpoint style and request-signing credentials when object operations fail. Validation: Execute a synthetic authenticated PUT and GET with known endpoint, trusted certificate and approved key, recording the exact failure stage.
  4. Action: Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. Validation: Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

Explanation

Correct Answer

D:

The situation is that after switch zoning maintenance, half the SAN hosts lose one path and engineers must isolate a fabric configuration error. Review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. Validation: Check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan. The action and test belong together because a missing FC target can be a fabric registration or zoning problem upstream of LUN presentation.

Incorrect Answers

A:

That action-and-evidence pair concerns “investigate mpio path thrashing before changing storage capacity”, not this decision. The appropriate action is to review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. To confirm, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

B:

The proposed pair focuses on “distinguish host filesystem corruption from san transport faults” instead. The appropriate action is to review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. To confirm, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

C:

“troubleshoot s3 endpoint DNS TLS and client signing” evaluates a different intervention. The appropriate action is to review HBA state, zoning, WWPN registration, target port health and host rescans before troubleshooting LUN filesystem contents. To confirm, check fabric name server discovery, allowed zones and ONTAP FC target port state during a test rescan.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests