Network Appliance NS0-165 Dumps
Network Appliance NS0-165 Practice Test 61
Question 600
For this case—An enterprise SAN redesign adds redundant switches but the servers have no validated multipath configuration.—which implementation and acceptance check are correctly paired?
Explanation
Correct Answer
The situation is that an enterprise SAN redesign adds redundant switches but the servers have no validated multipath configuration. Install and configure supported host multipath software and ONTAP target paths according to ALUA or applicable asymmetric access behavior. Validation: Run a controlled failure of one SAN fabric path and verify the host keeps its LUN available through a supported alternate path. The action and test belong together because multiple discovered target ports do not assure the host will use optimal paths or survive path failure without proper multipath integration.
Incorrect Answers
The situation is that an enterprise SAN redesign adds redundant switches but the servers have no validated multipath configuration. That action-and-evidence pair concerns “use igroups and lun mapping for explicit host access”, not this decision. The appropriate action is to install and configure supported host multipath software and ONTAP target paths according to ALUA or applicable asymmetric access behavior. To confirm, run a controlled failure of one SAN fabric path and verify the host keeps its LUN available through a supported alternate path.
The proposed pair focuses on “configure iscsi target access with supported svm interfaces and initiators” instead. The appropriate action is to install and configure supported host multipath software and ONTAP target paths according to ALUA or applicable asymmetric access behavior. To confirm, run a controlled failure of one SAN fabric path and verify the host keeps its LUN available through a supported alternate path.
“validate nvme over fabrics namespace and host compatibility” evaluates a different intervention. The appropriate action is to install and configure supported host multipath software and ONTAP target paths according to ALUA or applicable asymmetric access behavior. To confirm, run a controlled failure of one SAN fabric path and verify the host keeps its LUN available through a supported alternate path.
Question 601
A data analytics host upgrades to NVMe/TCP and must confirm its kernel and ONTAP target support the same mode. Which implementation or design choice most directly mitigates the stated issue?
Explanation
Correct Answer
Choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping. To verify, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
Incorrect Answers
“plan fibre channel zoning and ONTAP target wwpn access” is related to another task, not the failure shown here. NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
This alternative focuses on “design bucket namespace and object access permissions deliberately” instead of the required outcome. NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
That choice concerns “design alua and host multipathing for resilient san access”, not the immediate requirement. NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Question 602
A data analytics host upgrades to NVMe/TCP and must confirm its kernel and ONTAP target support the same mode. Which technical explanation most directly supports the right approach?
Explanation
Correct Answer
NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping. This supports the decision to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support.
Incorrect Answers
The principle behind “design alua and host multipathing for resilient san access” is not the one being tested. Here, NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
“use nas qtrees and namespace structure for manageable datasets” explains a different mechanism. Here, NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
That statement concerns “plan fibre channel zoning and ONTAP target wwpn access” rather than the cause in this case. Here, NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Question 603
For this situation—A data analytics host upgrades to NVMe/TCP and must confirm its kernel and ONTAP target support the same mode.—which check provides the strongest verification?
Explanation
Correct Answer
Test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric. It is the relevant test because NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Incorrect Answers
“configure iscsi target access with supported svm interfaces and initiators” would verify a different part of the system. To check this result, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
That test concerns “plan fibre channel zoning and ONTAP target wwpn access”, not the requested outcome. To check this result, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
This evidence addresses “provision smb shares with directory identity and acl checks” instead of confirming the repair. To check this result, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
Question 604
A data analytics host upgrades to NVMe/TCP and must confirm its kernel and ONTAP target support the same mode. If the team does the following—"Present an ONTAP NVMe namespace to an unsupported SCSI-only initiator and expect it to appear as a normal iSCSI LUN."—what could go wrong?
Explanation
Correct Answer
The host cannot enumerate the device even though the controller and network links are healthy. The shortcut is unsafe because NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Incorrect Answers
That consequence concerns “Concurrent block writes can corrupt the filesystem or expose sensitive application storage”, which is a different failure. Here, the host cannot enumerate the device even though the controller and network links are healthy.
“The application may see no disk or an unauthorized initiator could be allowed through careless mapping” does not describe the result of this shortcut. Here, the host cannot enumerate the device even though the controller and network links are healthy.
The alternative risk relates to “Hosts can be exposed to unintended targets and difficult-to-debug path conflicts or security risks”, not the stated mistake. Here, the host cannot enumerate the device even though the controller and network links are healthy.
Question 605
A data analytics host upgrades to NVMe/TCP and must confirm its kernel and ONTAP target support the same mode. Which action and validation evidence belong together?
Explanation
Correct Answer
Choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. Validation: Test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric. The action and test belong together because NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Incorrect Answers
“troubleshoot nas throughput through protocol and host telemetry” evaluates a different intervention. The appropriate action is to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. To confirm, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
The linked action and check for “use igroups and lun mapping for explicit host access” would not resolve this case. The appropriate action is to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. To confirm, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
That action-and-evidence pair concerns “plan fibre channel zoning and ONTAP target wwpn access”, not this decision. The appropriate action is to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. To confirm, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
Question 606
An ONTAP storage administrator considers: A SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. What is the most appropriate next decision?
Explanation
Correct Answer
The situation is that a SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. Choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping. To verify, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
Incorrect Answers
“use igroups and lun mapping for explicit host access” is related to another task, not the failure shown here. NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
That choice concerns “plan fibre channel zoning and ONTAP target wwpn access”, not the immediate requirement. NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
The proposed action addresses “diagnose smb authentication with ad DNS and time synchronization” rather than the problem described. NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Question 607
A SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. Why does the recommended approach address this particular concern?
Explanation
Correct Answer
The situation is that a SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping. This supports the decision to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support.
Incorrect Answers
“plan fibre channel zoning and ONTAP target wwpn access” describes another technical distinction. Here, NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
“distinguish host filesystem corruption from san transport faults” explains a different mechanism. Here, NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
The situation is that a SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. The principle behind “design alua and host multipathing for resilient san access” is not the one being tested. Here, NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Question 608
A SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. Which evidence best validates the proposed outcome?
Explanation
Correct Answer
The situation is that a SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. Test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric. It is the relevant test because NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Incorrect Answers
That test concerns “design alua and host multipathing for resilient san access”, not the requested outcome. To check this result, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
The proposed check is relevant to “plan fibre channel zoning and ONTAP target wwpn access”, but not sufficient here. To check this result, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
This evidence addresses “diagnose smb authentication with ad DNS and time synchronization” instead of confirming the repair. To check this result, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
Question 609
Consider this situation: A SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. A team member suggests: "Present an ONTAP NVMe namespace to an unsupported SCSI-only initiator and expect it to appear as a normal iSCSI LUN." What is the main risk?
Explanation
Correct Answer
The situation is that a SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. The host cannot enumerate the device even though the controller and network links are healthy. The shortcut is unsafe because NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Incorrect Answers
The alternative risk relates to “Concurrent block writes can corrupt the filesystem or expose sensitive application storage”, not the stated mistake. Here, the host cannot enumerate the device even though the controller and network links are healthy.
“Hosts can be exposed to unintended targets and difficult-to-debug path conflicts or security risks” can arise elsewhere, but it is not the most direct risk here. Here, the host cannot enumerate the device even though the controller and network links are healthy.
That consequence concerns “The action may overwrite recoverable data while an application-level filesystem issue persists”, which is a different failure. Here, the host cannot enumerate the device even though the controller and network links are healthy.
Question 610
A storage operations lead considers: A SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. Which response and evidence should be linked?
Explanation
Correct Answer
The situation is that a SAN administrator receives an NVMe namespace request from a host with only legacy FC SCSI utilities installed. Choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. Validation: Test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric. The action and test belong together because NVMe/TCP or NVMe/FC access uses namespace/subsystem concepts and host tooling that differ from classic SCSI LUN mapping.
Incorrect Answers
“use igroups and lun mapping for explicit host access” evaluates a different intervention. The appropriate action is to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. To confirm, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
That action-and-evidence pair concerns “clarify s3 object operations versus ONTAP nas file semantics”, not this decision. The appropriate action is to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. To confirm, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
The proposed pair focuses on “design alua and host multipathing for resilient san access” instead. The appropriate action is to choose supported ONTAP NVMe namespace and subsystem access only after confirming the target ONTAP release, transport and host initiator support. To confirm, test one authorized NVMe namespace discovery and device I/O using a compatible host and documented fabric.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests
- Network Appliance NS0-165 Practice Test 59 - 10 Questions (Last Reviewed 17-Nov-2026)
- Network Appliance NS0-165 Practice Test 60 - 10 Questions (Last Reviewed 16-Nov-2026)
- Network Appliance NS0-165 Practice Test 61 - 10 Questions (Last Reviewed 15-Nov-2026)
- Network Appliance NS0-165 Practice Test 62 - 10 Questions (Last Reviewed 14-Nov-2026)
- Network Appliance NS0-165 Practice Test 63 - 10 Questions (Last Reviewed 13-Nov-2026)