Network Appliance NS0-165 Dumps
Network Appliance NS0-165 Practice Test 59
Question 580
A storage operations lead considers: A SAN architect must create controlled zones between database HBAs and the corresponding NetApp target ports. Which response and evidence should be linked?
Explanation
Correct Answer
The situation is that a SAN architect must create controlled zones between database HBAs and the corresponding NetApp target ports. Configure a supported FC target and switch zoning design that permits intended initiators to see the appropriate ONTAP target ports. Validation: Inspect approved WWPN zones and confirm the host sees target ports and expected multipath devices after discovery. The action and test belong together because an FC path depends on host HBA, fabric zoning, target state and LUN mapping, not on volume existence alone.
Incorrect Answers
That action-and-evidence pair concerns “use igroups and lun mapping for explicit host access”, not this decision. The appropriate action is to configure a supported FC target and switch zoning design that permits intended initiators to see the appropriate ONTAP target ports. To confirm, inspect approved WWPN zones and confirm the host sees target ports and expected multipath devices after discovery.
The proposed pair focuses on “create ONTAP s3 object access with svm service and bucket policies” instead. The appropriate action is to configure a supported FC target and switch zoning design that permits intended initiators to see the appropriate ONTAP target ports. To confirm, inspect approved WWPN zones and confirm the host sees target ports and expected multipath devices after discovery.
“configure iscsi target access with supported svm interfaces and initiators” evaluates a different intervention. The appropriate action is to configure a supported FC target and switch zoning design that permits intended initiators to see the appropriate ONTAP target ports. To confirm, inspect approved WWPN zones and confirm the host sees target ports and expected multipath devices after discovery.
Question 581
An administrator provisions a database LUN and needs only two cluster nodes to discover the same device through a supported arrangement. Which action best addresses this requirement?
Explanation
Correct Answer
Create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context. To verify, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
Incorrect Answers
“configure iscsi target access with supported svm interfaces and initiators” is related to another task, not the failure shown here. An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
This alternative focuses on “plan fibre channel zoning and ONTAP target wwpn access” instead of the required outcome. An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
That choice concerns “troubleshoot iscsi discovery and authentication separately”, not the immediate requirement. An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Question 582
A NetApp storage engineer considers: An administrator provisions a database LUN and needs only two cluster nodes to discover the same device through a supported arrangement. Which underlying principle applies?
Explanation
Correct Answer
An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context. This supports the decision to create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts.
Incorrect Answers
The principle behind “plan fibre channel zoning and ONTAP target wwpn access” is not the one being tested. Here, an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
“design alua and host multipathing for resilient san access” explains a different mechanism. Here, an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
That statement concerns “validate nvme over fabrics namespace and host compatibility” rather than the cause in this case. Here, an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Question 583
An administrator provisions a database LUN and needs only two cluster nodes to discover the same device through a supported arrangement. What should the team examine before accepting the result?
Explanation
Correct Answer
Check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it. It is the relevant test because an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Incorrect Answers
“plan fibre channel zoning and ONTAP target wwpn access” would verify a different part of the system. To check this result, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
That test concerns “validate nvme over fabrics namespace and host compatibility”, not the requested outcome. To check this result, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
This evidence addresses “design alua and host multipathing for resilient san access” instead of confirming the repair. To check this result, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
Question 584
An administrator provisions a database LUN and needs only two cluster nodes to discover the same device through a supported arrangement. The proposed shortcut is: "Map one writable database LUN indiscriminately to unrelated hosts without planning a clustered filesystem or access coordination." Which failure is most likely?
Explanation
Correct Answer
Concurrent block writes can corrupt the filesystem or expose sensitive application storage. The shortcut is unsafe because an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Incorrect Answers
That consequence concerns “A single switch or adapter fault may disconnect the host from block storage despite healthy ONTAP…”, which is a different failure. Here, concurrent block writes can corrupt the filesystem or expose sensitive application storage.
“Hosts can be exposed to unintended targets and difficult-to-debug path conflicts or security risks” does not describe the result of this shortcut. Here, concurrent block writes can corrupt the filesystem or expose sensitive application storage.
The alternative risk relates to “The action may overwrite recoverable data while an application-level filesystem issue persists”, not the stated mistake. Here, concurrent block writes can corrupt the filesystem or expose sensitive application storage.
Question 585
For this case—An administrator provisions a database LUN and needs only two cluster nodes to discover the same device through a supported arrangement.—which implementation and acceptance check are correctly paired?
Explanation
Correct Answer
Create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. Validation: Check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it. The action and test belong together because an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Incorrect Answers
“plan fibre channel zoning and ONTAP target wwpn access” evaluates a different intervention. The appropriate action is to create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. To confirm, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
The linked action and check for “design alua and host multipathing for resilient san access” would not resolve this case. The appropriate action is to create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. To confirm, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
That action-and-evidence pair concerns “validate nvme over fabrics namespace and host compatibility”, not this decision. The appropriate action is to create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. To confirm, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
Question 586
A storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. Which implementation or design choice most directly mitigates the stated issue?
Explanation
Correct Answer
The situation is that a storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. Create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context. To verify, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
Incorrect Answers
“design alua and host multipathing for resilient san access” is related to another task, not the failure shown here. An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
That choice concerns “diagnose san lun missing from igroup or map”, not the immediate requirement. An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
The proposed action addresses “configure iscsi target access with supported svm interfaces and initiators” rather than the problem described. An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Question 587
A storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. Which technical explanation most directly supports the right approach?
Explanation
Correct Answer
The situation is that a storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. An igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context. This supports the decision to create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts.
Incorrect Answers
“plan fibre channel zoning and ONTAP target wwpn access” describes another technical distinction. Here, an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
“validate nvme over fabrics namespace and host compatibility” explains a different mechanism. Here, an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
The principle behind “configure iscsi target access with supported svm interfaces and initiators” is not the one being tested. Here, an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Question 588
For this situation—A storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host.—which check provides the strongest verification?
Explanation
Correct Answer
The situation is that a storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. Check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it. It is the relevant test because an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Incorrect Answers
The situation is that a storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. That test concerns “validate nvme over fabrics namespace and host compatibility”, not the requested outcome. To check this result, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
The proposed check is relevant to “investigate nfs stale file handles after namespace modifications”, but not sufficient here. To check this result, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
This evidence addresses “configure iscsi target access with supported svm interfaces and initiators” instead of confirming the repair. To check this result, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
Question 589
A storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. If the team does the following—"Map one writable database LUN indiscriminately to unrelated hosts without planning a clustered filesystem or access coordination."—what could go wrong?
Explanation
Correct Answer
The situation is that a storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. Concurrent block writes can corrupt the filesystem or expose sensitive application storage. The shortcut is unsafe because an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Incorrect Answers
The alternative risk relates to “A single switch or adapter fault may disconnect the host from block storage despite healthy ONTAP…”, not the stated mistake. Here, concurrent block writes can corrupt the filesystem or expose sensitive application storage.
“The host cannot enumerate the device even though the controller and network links are healthy” can arise elsewhere, but it is not the most direct risk here. Here, concurrent block writes can corrupt the filesystem or expose sensitive application storage.
That consequence concerns “Hosts can be exposed to unintended targets and difficult-to-debug path conflicts or security risks”, which is a different failure. Here, concurrent block writes can corrupt the filesystem or expose sensitive application storage.
Question 590
A storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. Which action and validation evidence belong together?
Explanation
Correct Answer
The situation is that a storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. Create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. Validation: Check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it. The action and test belong together because an igroup is an access-control association for block initiators and must reflect the supported host identity and operating system context.
Incorrect Answers
The situation is that a storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. “plan fibre channel zoning and ONTAP target wwpn access” evaluates a different intervention. The appropriate action is to create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. To confirm, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
The situation is that a storage support case shows the correct LUN created but mapped to an old test-server igroup rather than the production host. That action-and-evidence pair concerns “validate nvme over fabrics namespace and host compatibility”, not this decision. The appropriate action is to create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. To confirm, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
The proposed pair focuses on “configure iscsi target access with supported svm interfaces and initiators” instead. The appropriate action is to create ONTAP initiator groups with the correct host IQNs or WWPNs and map LUNs only to intended hosts. To confirm, check a test LUN map from the intended initiator while confirming an unrelated initiator cannot see it.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests
- Network Appliance NS0-165 Practice Test 57 - 10 Questions (Last Reviewed 19-Nov-2026)
- Network Appliance NS0-165 Practice Test 58 - 10 Questions (Last Reviewed 18-Nov-2026)
- Network Appliance NS0-165 Practice Test 59 - 10 Questions (Last Reviewed 17-Nov-2026)
- Network Appliance NS0-165 Practice Test 60 - 10 Questions (Last Reviewed 16-Nov-2026)
- Network Appliance NS0-165 Practice Test 61 - 10 Questions (Last Reviewed 15-Nov-2026)