Practice Exams:

Network Appliance NS0-165 Dumps

EXAM: NetApp Certified Data Administrator, ONTAP
Verified By Experts
Premium Bundle
$49.99

NS0-165 Premium ETE File


  • Premium File 60 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Network Appliance NS0-165 Practice Test 49

Question 480

For this case—A storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port.—which implementation and acceptance check are correctly paired?

  1. Action: Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  2. Action: Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Validation: Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
  3. Action: Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Validation: Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.
  4. Action: Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. Validation: Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.

Explanation

Correct Answer

D:

The situation is that a storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. Validation: Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address. The action and test belong together because a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.

Incorrect Answers

A:

That action-and-evidence pair concerns “use packet errors and switch counters to isolate poor network performance”, not this decision. The appropriate action is to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. To confirm, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.

B:

The proposed pair focuses on “use broadcast domains and ipspaces for appropriate network separation” instead. The appropriate action is to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. To confirm, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.

C:

“understand cluster and intercluster data network roles” evaluates a different intervention. The appropriate action is to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. To confirm, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.

Question 481

A NAS cluster needs redundant uplinks and the engineer must coordinate ifgrp configuration with its top-of-rack switch. Which implementation or design choice most directly mitigates the stated issue?

  1. Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode.
  2. Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance.
  3. Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration.
  4. Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior.

Explanation

Correct Answer

A:

Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol. To verify, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

Incorrect Answers

B:

“understand cluster and intercluster data network roles” is related to another task, not the failure shown here. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

C:

This alternative focuses on “plan tagged VLAN interfaces for storage client networks” instead of the required outcome. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

D:

That choice concerns “choose lif service policies and failover groups for supported protocols”, not the immediate requirement. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Question 482

A NAS cluster needs redundant uplinks and the engineer must coordinate ifgrp configuration with its top-of-rack switch. Which technical explanation most directly supports the right approach?

  1. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.
  2. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.
  3. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.
  4. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.

Explanation

Correct Answer

B:

Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol. This supports the decision to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode.

Incorrect Answers

A:

The principle behind “understand cluster and intercluster data network roles” is not the one being tested. Here, link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

C:

“test DNS dependencies separately from raw IP connectivity” explains a different mechanism. Here, link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

D:

That statement concerns “choose lif service policies and failover groups for supported protocols” rather than the cause in this case. Here, link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Question 483

For this situation—A NAS cluster needs redundant uplinks and the engineer must coordinate ifgrp configuration with its top-of-rack switch.—which check provides the strongest verification?

  1. Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
  2. Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
  3. Inspect interface-group member status and switch negotiations, then test a supported single-link fault.
  4. Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.

Explanation

Correct Answer

C:

Inspect interface-group member status and switch negotiations, then test a supported single-link fault. It is the relevant test because link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Incorrect Answers

A:

“use broadcast domains and ipspaces for appropriate network separation” would verify a different part of the system. To check this result, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

B:

That test concerns “choose lif service policies and failover groups for supported protocols”, not the requested outcome. To check this result, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

D:

This evidence addresses “plan tagged VLAN interfaces for storage client networks” instead of confirming the repair. To check this result, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

Question 484

A NAS cluster needs redundant uplinks and the engineer must coordinate ifgrp configuration with its top-of-rack switch. If the team does the following—"Build an LACP interface group but leave the switch ports as unrelated standalone links without a configured aggregation."—what could go wrong?

  1. The LIF can appear administratively up while frames never reach its client or gateway.
  2. Users continue seeing name-based mount failures while data remains intact and accessible by correct IP.
  3. SAN hosts may lose storage access even when an unrelated NAS service failover appears successful.
  4. Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections.

Explanation

Correct Answer

D:

Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections. The shortcut is unsafe because link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Incorrect Answers

A:

That consequence concerns “The LIF can appear administratively up while frames never reach its client or gateway”, which is a different failure. Here, traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections.

B:

“Users continue seeing name-based mount failures while data remains intact and accessible by correct IP” does not describe the result of this shortcut. Here, traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections.

C:

The alternative risk relates to “SAN hosts may lose storage access even when an unrelated NAS service failover appears successful”, not the stated mistake. Here, traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections.

Question 485

A NAS cluster needs redundant uplinks and the engineer must coordinate ifgrp configuration with its top-of-rack switch. Which action and validation evidence belong together?

  1. Action: Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. Validation: Inspect interface-group member status and switch negotiations, then test a supported single-link fault.
  2. Action: Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. Validation: Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
  3. Action: Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Validation: Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
  4. Action: Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. Validation: Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.

Explanation

Correct Answer

A:

Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. Validation: Inspect interface-group member status and switch negotiations, then test a supported single-link fault. The action and test belong together because link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Incorrect Answers

B:

“plan tagged VLAN interfaces for storage client networks” evaluates a different intervention. The appropriate action is to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. To confirm, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

C:

The linked action and check for “choose lif service policies and failover groups for supported protocols” would not resolve this case. The appropriate action is to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. To confirm, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

D:

That action-and-evidence pair concerns “troubleshoot failed lif or port reachability from actual evidence”, not this decision. The appropriate action is to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. To confirm, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

Question 486

An ONTAP storage administrator considers: An operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. What is the most appropriate next decision?

  1. Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon.
  2. Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode.
  3. Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance.
  4. Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior.

Explanation

Correct Answer

B:

The situation is that an operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol. To verify, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

Incorrect Answers

A:

“test DNS dependencies separately from raw IP connectivity” is related to another task, not the failure shown here. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

C:

That choice concerns “understand cluster and intercluster data network roles”, not the immediate requirement. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

D:

The proposed action addresses “choose lif service policies and failover groups for supported protocols” rather than the problem described. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Question 487

An operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Why does the recommended approach address this particular concern?

  1. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.
  2. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
  3. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.
  4. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.

Explanation

Correct Answer

C:

The situation is that an operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol. This supports the decision to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode.

Incorrect Answers

A:

“understand cluster and intercluster data network roles” describes another technical distinction. Here, link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

B:

“plan tagged VLAN interfaces for storage client networks” explains a different mechanism. Here, link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

D:

The principle behind “choose lif service policies and failover groups for supported protocols” is not the one being tested. Here, link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Question 488

An operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Which evidence best validates the proposed outcome?

  1. Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.
  2. Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
  3. Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
  4. Inspect interface-group member status and switch negotiations, then test a supported single-link fault.

Explanation

Correct Answer

D:

The situation is that an operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Inspect interface-group member status and switch negotiations, then test a supported single-link fault. It is the relevant test because link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Incorrect Answers

A:

That test concerns “diagnose mtu mismatches on high-speed ONTAP paths”, not the requested outcome. To check this result, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

B:

The proposed check is relevant to “use broadcast domains and ipspaces for appropriate network separation”, but not sufficient here. To check this result, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

C:

This evidence addresses “choose lif service policies and failover groups for supported protocols” instead of confirming the repair. To check this result, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

Question 489

Consider this situation: An operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. A team member suggests: "Build an LACP interface group but leave the switch ports as unrelated standalone links without a configured aggregation." What is the main risk?

  1. Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections.
  2. Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.
  3. The LIF can appear administratively up while frames never reach its client or gateway.
  4. Client services may not reach gateways or violate the intended network separation design.

Explanation

Correct Answer

A:

The situation is that an operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections. The shortcut is unsafe because link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Incorrect Answers

B:

The alternative risk relates to “Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access”, not the stated mistake. Here, traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections.

C:

“The LIF can appear administratively up while frames never reach its client or gateway” can arise elsewhere, but it is not the most direct risk here. Here, traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections.

D:

That consequence concerns “Client services may not reach gateways or violate the intended network separation design”, which is a different failure. Here, traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections.

Question 490

A storage operations lead considers: An operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Which response and evidence should be linked?

  1. Action: Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. Validation: Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
  2. Action: Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. Validation: Inspect interface-group member status and switch negotiations, then test a supported single-link fault.
  3. Action: Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Validation: Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
  4. Action: Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Validation: Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

Explanation

Correct Answer

B:

The situation is that an operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. Validation: Inspect interface-group member status and switch negotiations, then test a supported single-link fault. The action and test belong together because link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Incorrect Answers

A:

The situation is that an operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. “plan tagged VLAN interfaces for storage client networks” evaluates a different intervention. The appropriate action is to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. To confirm, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

C:

That action-and-evidence pair concerns “choose lif service policies and failover groups for supported protocols”, not this decision. The appropriate action is to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. To confirm, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

D:

The proposed pair focuses on “understand cluster and intercluster data network roles” instead. The appropriate action is to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. To confirm, inspect interface-group member status and switch negotiations, then test a supported single-link fault.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests