Network Appliance NS0-165 Dumps
Network Appliance NS0-165 Practice Test 48
Question 470
An administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Which action and validation evidence belong together?
Explanation
Correct Answer
The situation is that an administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Validation: Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF. The action and test belong together because ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Incorrect Answers
“plan tagged VLAN interfaces for storage client networks” evaluates a different intervention. The appropriate action is to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. To confirm, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
That action-and-evidence pair concerns “choose lif service policies and failover groups for supported protocols”, not this decision. The appropriate action is to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. To confirm, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
The proposed pair focuses on “trace gateway and routing errors for remote storage clients” instead. The appropriate action is to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. To confirm, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
Question 471
During an enterprise ONTAP operations review, An IT team adds a new NFS VLAN to its ONTAP cluster and must update both storage and switch trunks. What is the most appropriate next decision?
Explanation
Correct Answer
Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align. To verify, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
Incorrect Answers
This alternative focuses on “understand cluster and intercluster data network roles” instead of the required outcome. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
That choice concerns “use broadcast domains and ipspaces for appropriate network separation”, not the immediate requirement. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
“use interface groups only with matching switch link configuration” is related to another task, not the failure shown here. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Question 472
An IT team adds a new NFS VLAN to its ONTAP cluster and must update both storage and switch trunks. Why does the recommended approach address this particular concern?
Explanation
Correct Answer
A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align. This supports the decision to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration.
Incorrect Answers
“choose lif service policies and failover groups for supported protocols” explains a different mechanism. Here, a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
That statement concerns “use packet errors and switch counters to isolate poor network performance” rather than the cause in this case. Here, a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
The principle behind “use broadcast domains and ipspaces for appropriate network separation” is not the one being tested. Here, a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Question 473
An IT team adds a new NFS VLAN to its ONTAP cluster and must update both storage and switch trunks. Which evidence best validates the proposed outcome?
Explanation
Correct Answer
Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address. It is the relevant test because a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Incorrect Answers
This evidence addresses “use packet errors and switch counters to isolate poor network performance” instead of confirming the repair. To check this result, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
“choose lif service policies and failover groups for supported protocols” would verify a different part of the system. To check this result, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
That test concerns “use broadcast domains and ipspaces for appropriate network separation”, not the requested outcome. To check this result, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
Question 474
Consider this situation: An IT team adds a new NFS VLAN to its ONTAP cluster and must update both storage and switch trunks. A team member suggests: "Put a VLAN-tagged ONTAP data interface behind an access port configured for an unrelated untagged segment." What is the main risk?
Explanation
Correct Answer
The LIF can appear administratively up while frames never reach its client or gateway. The shortcut is unsafe because a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Incorrect Answers
The alternative risk relates to “SAN hosts may lose storage access even when an unrelated NAS service failover appears successful”, not the stated mistake. Here, the LIF can appear administratively up while frames never reach its client or gateway.
That consequence concerns “Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access”, which is a different failure. Here, the LIF can appear administratively up while frames never reach its client or gateway.
“Client services may not reach gateways or violate the intended network separation design” does not describe the result of this shortcut. Here, the LIF can appear administratively up while frames never reach its client or gateway.
Question 475
A storage operations lead considers: An IT team adds a new NFS VLAN to its ONTAP cluster and must update both storage and switch trunks. Which response and evidence should be linked?
Explanation
Correct Answer
Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. Validation: Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address. The action and test belong together because a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Incorrect Answers
The linked action and check for “use interface groups only with matching switch link configuration” would not resolve this case. The appropriate action is to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. To confirm, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
That action-and-evidence pair concerns “choose lif service policies and failover groups for supported protocols”, not this decision. The appropriate action is to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. To confirm, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
“use broadcast domains and ipspaces for appropriate network separation” evaluates a different intervention. The appropriate action is to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. To confirm, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
Question 476
A storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. Which action best addresses this requirement?
Explanation
Correct Answer
The situation is that a storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align. To verify, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
Incorrect Answers
That choice concerns “understand cluster and intercluster data network roles”, not the immediate requirement. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
The proposed action addresses “choose lif service policies and failover groups for supported protocols” rather than the problem described. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
“use broadcast domains and ipspaces for appropriate network separation” is related to another task, not the failure shown here. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Question 477
A NetApp storage engineer considers: A storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. Which underlying principle applies?
Explanation
Correct Answer
The situation is that a storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. A configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align. This supports the decision to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration.
Incorrect Answers
The principle behind “choose lif service policies and failover groups for supported protocols” is not the one being tested. Here, a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
“use broadcast domains and ipspaces for appropriate network separation” describes another technical distinction. Here, a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
“understand cluster and intercluster data network roles” explains a different mechanism. Here, a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Question 478
A storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. What should the team examine before accepting the result?
Explanation
Correct Answer
The situation is that a storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address. It is the relevant test because a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Incorrect Answers
This evidence addresses “understand cluster and intercluster data network roles” instead of confirming the repair. To check this result, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
That test concerns “choose lif service policies and failover groups for supported protocols”, not the requested outcome. To check this result, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
The proposed check is relevant to “use interface groups only with matching switch link configuration”, but not sufficient here. To check this result, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
Question 479
A storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. The proposed shortcut is: "Put a VLAN-tagged ONTAP data interface behind an access port configured for an unrelated untagged segment." Which failure is most likely?
Explanation
Correct Answer
The situation is that a storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. The LIF can appear administratively up while frames never reach its client or gateway. The shortcut is unsafe because a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Incorrect Answers
“Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections” can arise elsewhere, but it is not the most direct risk here. Here, the LIF can appear administratively up while frames never reach its client or gateway.
That consequence concerns “SAN hosts may lose storage access even when an unrelated NAS service failover appears successful”, which is a different failure. Here, the LIF can appear administratively up while frames never reach its client or gateway.
The alternative risk relates to “Client services may not reach gateways or violate the intended network separation design”, not the stated mistake. Here, the LIF can appear administratively up while frames never reach its client or gateway.
Question 480
For this case—A storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port.—which implementation and acceptance check are correctly paired?
Explanation
Correct Answer
The situation is that a storage engineer sees intermittent connectivity after moving an SVM interface to a tagged VLAN on a switch access port. Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. Validation: Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address. The action and test belong together because a configured VLAN tag on one side is not sufficient when switch trunks, native VLAN settings and IP ranges do not align.
Incorrect Answers
That action-and-evidence pair concerns “use packet errors and switch counters to isolate poor network performance”, not this decision. The appropriate action is to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. To confirm, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
The proposed pair focuses on “use broadcast domains and ipspaces for appropriate network separation” instead. The appropriate action is to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. To confirm, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
“understand cluster and intercluster data network roles” evaluates a different intervention. The appropriate action is to use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. To confirm, validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests
- Network Appliance NS0-165 Practice Test 46 - 10 Questions (Last Reviewed 04-Oct-2026)
- Network Appliance NS0-165 Practice Test 47 - 10 Questions (Last Reviewed 03-Oct-2026)
- Network Appliance NS0-165 Practice Test 48 - 10 Questions (Last Reviewed 02-Oct-2026)
- Network Appliance NS0-165 Practice Test 49 - 10 Questions (Last Reviewed 01-Oct-2026)
- Network Appliance NS0-165 Practice Test 50 - 10 Questions (Last Reviewed 30-Sep-2026)