Network Appliance NS0-165 Dumps
Network Appliance NS0-165 Practice Test 47
Question 460
A storage operations lead considers: An ONTAP administrator compares a thin volume's apparent size with actual on-disk footprint after cloning and snapshot activity. Which response and evidence should be linked?
Explanation
Correct Answer
The situation is that an ONTAP administrator compares a thin volume's apparent size with actual on-disk footprint after cloning and snapshot activity. Use consistent logical-used, physical-used, footprint and snapshot measurements to explain true aggregate headroom to stakeholders. Validation: Create a short storage utilization report tracing one test volume, snapshot and FlexClone to aggregate used space. The action and test belong together because space reported by clients, thin volumes, snapshots and shared clone blocks can differ; only the correct physical metric shows usable remaining storage.
Incorrect Answers
That action-and-evidence pair concerns “explain compaction and storage efficiency accounting”, not this decision. The appropriate action is to use consistent logical-used, physical-used, footprint and snapshot measurements to explain true aggregate headroom to stakeholders. To confirm, create a short storage utilization report tracing one test volume, snapshot and FlexClone to aggregate used space.
The proposed pair focuses on “monitor snapshot retention impact on used space” instead. The appropriate action is to use consistent logical-used, physical-used, footprint and snapshot measurements to explain true aggregate headroom to stakeholders. To confirm, create a short storage utilization report tracing one test volume, snapshot and FlexClone to aggregate used space.
“use deduplication where actual repeated blocks justify efficiency” evaluates a different intervention. The appropriate action is to use consistent logical-used, physical-used, footprint and snapshot measurements to explain true aggregate headroom to stakeholders. To confirm, create a short storage utilization report tracing one test volume, snapshot and FlexClone to aggregate used space.
Question 461
A shared ONTAP cluster serves two business networks and the architect must avoid mixing their data LIF address spaces. Which action best addresses this requirement?
Explanation
Correct Answer
Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible. To verify, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
Incorrect Answers
“choose lif service policies and failover groups for supported protocols” is related to another task, not the failure shown here. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
This alternative focuses on “use interface groups only with matching switch link configuration” instead of the required outcome. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
That choice concerns “understand cluster and intercluster data network roles”, not the immediate requirement. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Question 462
A NetApp storage engineer considers: A shared ONTAP cluster serves two business networks and the architect must avoid mixing their data LIF address spaces. Which underlying principle applies?
Explanation
Correct Answer
Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible. This supports the decision to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries.
Incorrect Answers
The principle behind “choose lif service policies and failover groups for supported protocols” is not the one being tested. Here, ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
“use interface groups only with matching switch link configuration” explains a different mechanism. Here, ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
That statement concerns “plan tagged VLAN interfaces for storage client networks” rather than the cause in this case. Here, ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Question 463
A shared ONTAP cluster serves two business networks and the architect must avoid mixing their data LIF address spaces. What should the team examine before accepting the result?
Explanation
Correct Answer
Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF. It is the relevant test because ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Incorrect Answers
“choose lif service policies and failover groups for supported protocols” would verify a different part of the system. To check this result, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
That test concerns “use interface groups only with matching switch link configuration”, not the requested outcome. To check this result, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
This evidence addresses “understand cluster and intercluster data network roles” instead of confirming the repair. To check this result, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
Question 464
A shared ONTAP cluster serves two business networks and the architect must avoid mixing their data LIF address spaces. The proposed shortcut is: "Place tenant LIFs in arbitrary broadcast domains solely because their physical switches have spare ports." Which failure is most likely?
Explanation
Correct Answer
Client services may not reach gateways or violate the intended network separation design. The shortcut is unsafe because ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Incorrect Answers
That consequence concerns “SAN hosts may lose storage access even when an unrelated NAS service failover appears successful”, which is a different failure. Here, client services may not reach gateways or violate the intended network separation design.
“Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections” does not describe the result of this shortcut. Here, client services may not reach gateways or violate the intended network separation design.
The alternative risk relates to “Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access”, not the stated mistake. Here, client services may not reach gateways or violate the intended network separation design.
Question 465
For this case—A shared ONTAP cluster serves two business networks and the architect must avoid mixing their data LIF address spaces.—which implementation and acceptance check are correctly paired?
Explanation
Correct Answer
Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Validation: Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF. The action and test belong together because ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Incorrect Answers
“use interface groups only with matching switch link configuration” evaluates a different intervention. The appropriate action is to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. To confirm, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
The linked action and check for “understand cluster and intercluster data network roles” would not resolve this case. The appropriate action is to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. To confirm, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
That action-and-evidence pair concerns “plan tagged VLAN interfaces for storage client networks”, not this decision. The appropriate action is to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. To confirm, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
Question 466
An administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Which implementation or design choice most directly mitigates the stated issue?
Explanation
Correct Answer
The situation is that an administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible. To verify, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
Incorrect Answers
The situation is that an administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. “choose lif service policies and failover groups for supported protocols” is related to another task, not the failure shown here. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
That choice concerns “diagnose mtu mismatches on high-speed ONTAP paths”, not the immediate requirement. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
The proposed action addresses “plan tagged VLAN interfaces for storage client networks” rather than the problem described. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Question 467
An administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Which technical explanation most directly supports the right approach?
Explanation
Correct Answer
The situation is that an administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible. This supports the decision to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries.
Incorrect Answers
“diagnose mtu mismatches on high-speed ONTAP paths” describes another technical distinction. Here, ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
The situation is that an administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. “use interface groups only with matching switch link configuration” explains a different mechanism. Here, ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
The principle behind “plan tagged VLAN interfaces for storage client networks” is not the one being tested. Here, ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Question 468
For this situation—An administrator creates a data LIF in a broadcast domain with no route to the application's VLAN.—which check provides the strongest verification?
Explanation
Correct Answer
The situation is that an administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF. It is the relevant test because ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Incorrect Answers
That test concerns “choose lif service policies and failover groups for supported protocols”, not the requested outcome. To check this result, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
The proposed check is relevant to “plan tagged VLAN interfaces for storage client networks”, but not sufficient here. To check this result, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
The situation is that an administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. This evidence addresses “understand cluster and intercluster data network roles” instead of confirming the repair. To check this result, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
Question 469
An administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. If the team does the following—"Place tenant LIFs in arbitrary broadcast domains solely because their physical switches have spare ports."—what could go wrong?
Explanation
Correct Answer
The situation is that an administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Client services may not reach gateways or violate the intended network separation design. The shortcut is unsafe because ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Incorrect Answers
The alternative risk relates to “Users continue seeing name-based mount failures while data remains intact and accessible by correct IP”, not the stated mistake. Here, client services may not reach gateways or violate the intended network separation design.
“Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections” can arise elsewhere, but it is not the most direct risk here. Here, client services may not reach gateways or violate the intended network separation design.
That consequence concerns “Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access”, which is a different failure. Here, client services may not reach gateways or violate the intended network separation design.
Question 470
An administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Which action and validation evidence belong together?
Explanation
Correct Answer
The situation is that an administrator creates a data LIF in a broadcast domain with no route to the application's VLAN. Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Validation: Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF. The action and test belong together because ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
Incorrect Answers
“plan tagged VLAN interfaces for storage client networks” evaluates a different intervention. The appropriate action is to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. To confirm, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
That action-and-evidence pair concerns “choose lif service policies and failover groups for supported protocols”, not this decision. The appropriate action is to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. To confirm, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
The proposed pair focuses on “trace gateway and routing errors for remote storage clients” instead. The appropriate action is to configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. To confirm, inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests
- Network Appliance NS0-165 Practice Test 45 - 10 Questions (Last Reviewed 05-Oct-2026)
- Network Appliance NS0-165 Practice Test 46 - 10 Questions (Last Reviewed 04-Oct-2026)
- Network Appliance NS0-165 Practice Test 47 - 10 Questions (Last Reviewed 03-Oct-2026)
- Network Appliance NS0-165 Practice Test 48 - 10 Questions (Last Reviewed 02-Oct-2026)
- Network Appliance NS0-165 Practice Test 49 - 10 Questions (Last Reviewed 01-Oct-2026)