Network Appliance NS0-165 Dumps
Network Appliance NS0-165 Practice Test 50
Question 490
A storage operations lead considers: An operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Which response and evidence should be linked?
Explanation
Correct Answer
The situation is that an operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. Validation: Inspect interface-group member status and switch negotiations, then test a supported single-link fault. The action and test belong together because link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.
Incorrect Answers
The situation is that an operator troubleshoots a newly created ONTAP interface group whose members never negotiate active LACP state. “plan tagged VLAN interfaces for storage client networks” evaluates a different intervention. The appropriate action is to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. To confirm, inspect interface-group member status and switch negotiations, then test a supported single-link fault.
That action-and-evidence pair concerns “choose lif service policies and failover groups for supported protocols”, not this decision. The appropriate action is to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. To confirm, inspect interface-group member status and switch negotiations, then test a supported single-link fault.
The proposed pair focuses on “understand cluster and intercluster data network roles” instead. The appropriate action is to configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. To confirm, inspect interface-group member status and switch negotiations, then test a supported single-link fault.
Question 491
A storage team plans NAS LIF mobility across two nodes but must separately verify FC path resilience. Which action best addresses this requirement?
Explanation
Correct Answer
Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe. To verify, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
Incorrect Answers
This alternative focuses on “use broadcast domains and ipspaces for appropriate network separation” instead of the required outcome. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
That choice concerns “use packet errors and switch counters to isolate poor network performance”, not the immediate requirement. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
“use interface groups only with matching switch link configuration” is related to another task, not the failure shown here. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Question 492
A NetApp storage engineer considers: A storage team plans NAS LIF mobility across two nodes but must separately verify FC path resilience. Which underlying principle applies?
Explanation
Correct Answer
Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe. This supports the decision to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior.
Incorrect Answers
“trace gateway and routing errors for remote storage clients” explains a different mechanism. Here, different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
That statement concerns “use broadcast domains and ipspaces for appropriate network separation” rather than the cause in this case. Here, different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
The principle behind “plan tagged VLAN interfaces for storage client networks” is not the one being tested. Here, different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Question 493
A storage team plans NAS LIF mobility across two nodes but must separately verify FC path resilience. What should the team examine before accepting the result?
Explanation
Correct Answer
Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior. It is the relevant test because different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Incorrect Answers
This evidence addresses “use interface groups only with matching switch link configuration” instead of confirming the repair. To check this result, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
“use packet errors and switch counters to isolate poor network performance” would verify a different part of the system. To check this result, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
That test concerns “plan tagged VLAN interfaces for storage client networks”, not the requested outcome. To check this result, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
Question 494
A storage team plans NAS LIF mobility across two nodes but must separately verify FC path resilience. The proposed shortcut is: "Assume an FC target LIF fails over like a floating NFS IP address without host multipath or path planning." Which failure is most likely?
Explanation
Correct Answer
SAN hosts may lose storage access even when an unrelated NAS service failover appears successful. The shortcut is unsafe because different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Incorrect Answers
The alternative risk relates to “Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections”, not the stated mistake. Here, SAN hosts may lose storage access even when an unrelated NAS service failover appears successful.
That consequence concerns “Remote users remain disconnected while access policies become overly permissive”, which is a different failure. Here, SAN hosts may lose storage access even when an unrelated NAS service failover appears successful.
“The LIF can appear administratively up while frames never reach its client or gateway” does not describe the result of this shortcut. Here, SAN hosts may lose storage access even when an unrelated NAS service failover appears successful.
Question 495
For this case—A storage team plans NAS LIF mobility across two nodes but must separately verify FC path resilience.—which implementation and acceptance check are correctly paired?
Explanation
Correct Answer
Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Validation: Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior. The action and test belong together because different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Incorrect Answers
The linked action and check for “plan tagged VLAN interfaces for storage client networks” would not resolve this case. The appropriate action is to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. To confirm, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
That action-and-evidence pair concerns “use broadcast domains and ipspaces for appropriate network separation”, not this decision. The appropriate action is to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. To confirm, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
“understand cluster and intercluster data network roles” evaluates a different intervention. The appropriate action is to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. To confirm, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
Question 496
An administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. Which implementation or design choice most directly mitigates the stated issue?
Explanation
Correct Answer
The situation is that an administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe. To verify, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
Incorrect Answers
That choice concerns “understand cluster and intercluster data network roles”, not the immediate requirement. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
The proposed action addresses “plan tagged VLAN interfaces for storage client networks” rather than the problem described. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
“test DNS dependencies separately from raw IP connectivity” is related to another task, not the failure shown here. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Question 497
An administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. Which technical explanation most directly supports the right approach?
Explanation
Correct Answer
The situation is that an administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe. This supports the decision to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior.
Incorrect Answers
The principle behind “understand cluster and intercluster data network roles” is not the one being tested. Here, different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
“use interface groups only with matching switch link configuration” describes another technical distinction. Here, different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
“troubleshoot failed lif or port reachability from actual evidence” explains a different mechanism. Here, different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Question 498
For this situation—An administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software.—which check provides the strongest verification?
Explanation
Correct Answer
The situation is that an administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior. It is the relevant test because different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Incorrect Answers
This evidence addresses “use broadcast domains and ipspaces for appropriate network separation” instead of confirming the repair. To check this result, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
That test concerns “trace gateway and routing errors for remote storage clients”, not the requested outcome. To check this result, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
The proposed check is relevant to “use interface groups only with matching switch link configuration”, but not sufficient here. To check this result, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
Question 499
An administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. If the team does the following—"Assume an FC target LIF fails over like a floating NFS IP address without host multipath or path planning."—what could go wrong?
Explanation
Correct Answer
The situation is that an administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. SAN hosts may lose storage access even when an unrelated NAS service failover appears successful. The shortcut is unsafe because different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Incorrect Answers
“Client services may not reach gateways or violate the intended network separation design” can arise elsewhere, but it is not the most direct risk here. Here, SAN hosts may lose storage access even when an unrelated NAS service failover appears successful.
That consequence concerns “Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access”, which is a different failure. Here, SAN hosts may lose storage access even when an unrelated NAS service failover appears successful.
The alternative risk relates to “Users continue seeing name-based mount failures while data remains intact and accessible by correct IP”, not the stated mistake. Here, SAN hosts may lose storage access even when an unrelated NAS service failover appears successful.
Question 500
An administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. Which action and validation evidence belong together?
Explanation
Correct Answer
The situation is that an administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Validation: Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior. The action and test belong together because different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
Incorrect Answers
The situation is that an administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. That action-and-evidence pair concerns “use broadcast domains and ipspaces for appropriate network separation”, not this decision. The appropriate action is to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. To confirm, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
The proposed pair focuses on “understand cluster and intercluster data network roles” instead. The appropriate action is to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. To confirm, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
“use interface groups only with matching switch link configuration” evaluates a different intervention. The appropriate action is to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. To confirm, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests
- Network Appliance NS0-165 Practice Test 48 - 10 Questions (Last Reviewed 02-Oct-2026)
- Network Appliance NS0-165 Practice Test 49 - 10 Questions (Last Reviewed 01-Oct-2026)
- Network Appliance NS0-165 Practice Test 50 - 10 Questions (Last Reviewed 30-Sep-2026)
- Network Appliance NS0-165 Practice Test 51 - 10 Questions (Last Reviewed 29-Sep-2026)
- Network Appliance NS0-165 Practice Test 52 - 10 Questions (Last Reviewed 28-Sep-2026)