Practice Exams:

Network Appliance NS0-165 Dumps

EXAM: NetApp Certified Data Administrator, ONTAP
Verified By Experts
Premium Bundle
$49.99

NS0-165 Premium ETE File


  • Premium File 60 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Network Appliance NS0-165 Practice Test 51

Question 500

An administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. Which action and validation evidence belong together?

  1. Action: Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Validation: Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
  2. Action: Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Validation: Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.
  3. Action: Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. Validation: Inspect interface-group member status and switch negotiations, then test a supported single-link fault.
  4. Action: Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Validation: Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.

Explanation

Correct Answer

D:

The situation is that an administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Validation: Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior. The action and test belong together because different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.

Incorrect Answers

A:

The situation is that an administrator sees NFS access recover after a port failure and incorrectly assumes all SAN initiators need no multipath software. That action-and-evidence pair concerns “use broadcast domains and ipspaces for appropriate network separation”, not this decision. The appropriate action is to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. To confirm, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.

B:

The proposed pair focuses on “understand cluster and intercluster data network roles” instead. The appropriate action is to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. To confirm, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.

C:

“use interface groups only with matching switch link configuration” evaluates a different intervention. The appropriate action is to place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. To confirm, simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.

Question 501

For this ONTAP storage administration case, A company can mount NFS volumes but its remote SnapMirror transfer fails because intercluster LIFs cannot communicate. What is the most appropriate next decision?

  1. Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance.
  2. Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode.
  3. Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used.
  4. Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration.

Explanation

Correct Answer

A:

Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe. To verify, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

Incorrect Answers

B:

“use interface groups only with matching switch link configuration” is related to another task, not the failure shown here. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

C:

This alternative focuses on “diagnose mtu mismatches on high-speed ONTAP paths” instead of the required outcome. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

D:

That choice concerns “plan tagged VLAN interfaces for storage client networks”, not the immediate requirement. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Question 502

A company can mount NFS volumes but its remote SnapMirror transfer fails because intercluster LIFs cannot communicate. Why does the recommended approach address this particular concern?

  1. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
  2. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.
  3. Ports and LIFs require compatible broadcast-domain reachability; a physical link alone does not prove a client subnet is accessible.
  4. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Explanation

Correct Answer

B:

Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe. This supports the decision to keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance.

Incorrect Answers

A:

The principle behind “choose lif service policies and failover groups for supported protocols” is not the one being tested. Here, replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

C:

“use broadcast domains and ipspaces for appropriate network separation” explains a different mechanism. Here, replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

D:

That statement concerns “use interface groups only with matching switch link configuration” rather than the cause in this case. Here, replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Question 503

A company can mount NFS volumes but its remote SnapMirror transfer fails because intercluster LIFs cannot communicate. Which evidence best validates the proposed outcome?

  1. Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  2. Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
  3. Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.
  4. Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.

Explanation

Correct Answer

C:

Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship. It is the relevant test because replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Incorrect Answers

A:

“use packet errors and switch counters to isolate poor network performance” would verify a different part of the system. To check this result, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

B:

That test concerns “use broadcast domains and ipspaces for appropriate network separation”, not the requested outcome. To check this result, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

D:

This evidence addresses “plan tagged VLAN interfaces for storage client networks” instead of confirming the repair. To check this result, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

Question 504

Consider this situation: A company can mount NFS volumes but its remote SnapMirror transfer fails because intercluster LIFs cannot communicate. A team member suggests: "Route intercluster SnapMirror sessions through a client network that cannot reach the remote peer and assume volume visibility implies replication reachability." What is the main risk?

  1. The LIF can appear administratively up while frames never reach its client or gateway.
  2. Users continue seeing name-based mount failures while data remains intact and accessible by correct IP.
  3. SAN hosts may lose storage access even when an unrelated NAS service failover appears successful.
  4. Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.

Explanation

Correct Answer

D:

Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access. The shortcut is unsafe because replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Incorrect Answers

A:

That consequence concerns “The LIF can appear administratively up while frames never reach its client or gateway”, which is a different failure. Here, snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.

B:

“Users continue seeing name-based mount failures while data remains intact and accessible by correct IP” does not describe the result of this shortcut. Here, snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.

C:

The alternative risk relates to “SAN hosts may lose storage access even when an unrelated NAS service failover appears successful”, not the stated mistake. Here, snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.

Question 505

A storage operations lead considers: A company can mount NFS volumes but its remote SnapMirror transfer fails because intercluster LIFs cannot communicate. Which response and evidence should be linked?

  1. Action: Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Validation: Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.
  2. Action: Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Validation: Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
  3. Action: Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Validation: Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
  4. Action: Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. Validation: Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.

Explanation

Correct Answer

A:

Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Validation: Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship. The action and test belong together because replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Incorrect Answers

B:

“use broadcast domains and ipspaces for appropriate network separation” evaluates a different intervention. The appropriate action is to keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. To confirm, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

C:

The linked action and check for “choose lif service policies and failover groups for supported protocols” would not resolve this case. The appropriate action is to keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. To confirm, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

D:

That action-and-evidence pair concerns “troubleshoot failed lif or port reachability from actual evidence”, not this decision. The appropriate action is to keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. To confirm, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

Question 506

An engineer documents management, cluster and data LIF types before replacing storage switches. Which action best addresses this requirement?

  1. Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode.
  2. Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance.
  3. Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior.
  4. Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions.

Explanation

Correct Answer

B:

The situation is that an engineer documents management, cluster and data LIF types before replacing storage switches. Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe. To verify, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

Incorrect Answers

A:

The situation is that an engineer documents management, cluster and data LIF types before replacing storage switches. “use interface groups only with matching switch link configuration” is related to another task, not the failure shown here. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

C:

That choice concerns “choose lif service policies and failover groups for supported protocols”, not the immediate requirement. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

D:

The proposed action addresses “troubleshoot failed lif or port reachability from actual evidence” rather than the problem described. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Question 507

A NetApp storage engineer considers: An engineer documents management, cluster and data LIF types before replacing storage switches. Which underlying principle applies?

  1. A link can pass small probes while larger frames are dropped because one device does not support the configured packet size.
  2. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
  3. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.
  4. Link aggregation can improve availability or aggregate throughput only when the storage and switching ends agree on membership and protocol.

Explanation

Correct Answer

C:

The situation is that an engineer documents management, cluster and data LIF types before replacing storage switches. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe. This supports the decision to keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance.

Incorrect Answers

A:

“diagnose mtu mismatches on high-speed ONTAP paths” describes another technical distinction. Here, replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

B:

“choose lif service policies and failover groups for supported protocols” explains a different mechanism. Here, replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

D:

The principle behind “use interface groups only with matching switch link configuration” is not the one being tested. Here, replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Question 508

An engineer documents management, cluster and data LIF types before replacing storage switches. What should the team examine before accepting the result?

  1. Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
  2. Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.
  3. Inspect interface-group member status and switch negotiations, then test a supported single-link fault.
  4. Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

Explanation

Correct Answer

D:

The situation is that an engineer documents management, cluster and data LIF types before replacing storage switches. Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship. It is the relevant test because replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Incorrect Answers

A:

That test concerns “plan tagged VLAN interfaces for storage client networks”, not the requested outcome. To check this result, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

B:

The proposed check is relevant to “diagnose mtu mismatches on high-speed ONTAP paths”, but not sufficient here. To check this result, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

C:

This evidence addresses “use interface groups only with matching switch link configuration” instead of confirming the repair. To check this result, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

Question 509

An engineer documents management, cluster and data LIF types before replacing storage switches. The proposed shortcut is: "Route intercluster SnapMirror sessions through a client network that cannot reach the remote peer and assume volume visibility implies replication reachability." Which failure is most likely?

  1. Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.
  2. Large I/O requests can stall or retransmit despite apparently healthy small-packet network pings.
  3. Client services may not reach gateways or violate the intended network separation design.
  4. The LIF can appear administratively up while frames never reach its client or gateway.

Explanation

Correct Answer

A:

The situation is that an engineer documents management, cluster and data LIF types before replacing storage switches. Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access. The shortcut is unsafe because replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Incorrect Answers

B:

The alternative risk relates to “Large I/O requests can stall or retransmit despite apparently healthy small-packet network pings”, not the stated mistake. Here, snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.

C:

“Client services may not reach gateways or violate the intended network separation design” can arise elsewhere, but it is not the most direct risk here. Here, snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.

D:

The situation is that an engineer documents management, cluster and data LIF types before replacing storage switches. That consequence concerns “The LIF can appear administratively up while frames never reach its client or gateway”, which is a different failure. Here, snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.

Question 510

For this case—An engineer documents management, cluster and data LIF types before replacing storage switches.—which implementation and acceptance check are correctly paired?

  1. Action: Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode. Validation: Inspect interface-group member status and switch negotiations, then test a supported single-link fault.
  2. Action: Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Validation: Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.
  3. Action: Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. Validation: Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.
  4. Action: Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Validation: Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.

Explanation

Correct Answer

B:

The situation is that an engineer documents management, cluster and data LIF types before replacing storage switches. Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Validation: Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship. The action and test belong together because replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.

Incorrect Answers

A:

“use interface groups only with matching switch link configuration” evaluates a different intervention. The appropriate action is to keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. To confirm, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

C:

That action-and-evidence pair concerns “test DNS dependencies separately from raw IP connectivity”, not this decision. The appropriate action is to keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. To confirm, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

D:

The proposed pair focuses on “use broadcast domains and ipspaces for appropriate network separation” instead. The appropriate action is to keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. To confirm, map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests