Practice Exams:

Network Appliance NS0-165 Dumps

EXAM: NetApp Certified Data Administrator, ONTAP
Verified By Experts
Premium Bundle
$49.99

NS0-165 Premium ETE File


  • Premium File 60 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Network Appliance NS0-165 Practice Test 56

Question 550

A storage operations lead considers: A storage team must determine whether packet loss is caused by mismatch between client and ONTAP network MTU. Which response and evidence should be linked?

  1. Action: Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. Validation: Run a test from a local and remote client while recording ONTAP network routes and return traffic path.
  2. Action: Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. Validation: Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.
  3. Action: Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Validation: Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
  4. Action: Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

Explanation

Correct Answer

B:

The situation is that a storage team must determine whether packet loss is caused by mismatch between client and ONTAP network MTU. Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. Validation: Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path. The action and test belong together because a link can pass small probes while larger frames are dropped because one device does not support the configured packet size.

Incorrect Answers

A:

“trace gateway and routing errors for remote storage clients” evaluates a different intervention. The appropriate action is to confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. To confirm, run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.

C:

That action-and-evidence pair concerns “choose lif service policies and failover groups for supported protocols”, not this decision. The appropriate action is to confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. To confirm, run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.

D:

The proposed pair focuses on “use packet errors and switch counters to isolate poor network performance” instead. The appropriate action is to confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. To confirm, run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.

Question 551

A NAS client experiences intermittent slow copies and the switch reports CRC errors on an ONTAP uplink. Which action best addresses this requirement?

  1. Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries.
  2. Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used.
  3. Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS.
  4. Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon.

Explanation

Correct Answer

C:

Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises. To verify, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

Incorrect Answers

A:

This alternative focuses on “trace gateway and routing errors for remote storage clients” instead of the required outcome. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

B:

That choice concerns “diagnose mtu mismatches on high-speed ONTAP paths”, not the immediate requirement. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

D:

“test DNS dependencies separately from raw IP connectivity” is related to another task, not the failure shown here. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Question 552

A NetApp storage engineer considers: A NAS client experiences intermittent slow copies and the switch reports CRC errors on an ONTAP uplink. Which underlying principle applies?

  1. A link can pass small probes while larger frames are dropped because one device does not support the configured packet size.
  2. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
  3. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.
  4. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Explanation

Correct Answer

D:

Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises. This supports the decision to correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS.

Incorrect Answers

A:

“diagnose mtu mismatches on high-speed ONTAP paths” explains a different mechanism. Here, physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

B:

That statement concerns “choose lif service policies and failover groups for supported protocols” rather than the cause in this case. Here, physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

C:

The principle behind “trace gateway and routing errors for remote storage clients” is not the one being tested. Here, physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Question 553

A NAS client experiences intermittent slow copies and the switch reports CRC errors on an ONTAP uplink. What should the team examine before accepting the result?

  1. Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  2. Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.
  3. Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.
  4. Run a test from a local and remote client while recording ONTAP network routes and return traffic path.

Explanation

Correct Answer

A:

Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair. It is the relevant test because physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Incorrect Answers

B:

This evidence addresses “test DNS dependencies separately from raw IP connectivity” instead of confirming the repair. To check this result, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

C:

“understand cluster and intercluster data network roles” would verify a different part of the system. To check this result, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

D:

That test concerns “trace gateway and routing errors for remote storage clients”, not the requested outcome. To check this result, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

Question 554

A NAS client experiences intermittent slow copies and the switch reports CRC errors on an ONTAP uplink. The proposed shortcut is: "Increase volume IOPS limits to fix a link that is already dropping frames due to a faulty cable or congestion." Which failure is most likely?

  1. Users continue seeing name-based mount failures while data remains intact and accessible by correct IP.
  2. Throughput remains unstable and error recovery consumes time despite no storage volume change.
  3. Large I/O requests can stall or retransmit despite apparently healthy small-packet network pings.
  4. The network outage persists and security is weakened unnecessarily.

Explanation

Correct Answer

B:

Throughput remains unstable and error recovery consumes time despite no storage volume change. The shortcut is unsafe because physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Incorrect Answers

A:

The alternative risk relates to “Users continue seeing name-based mount failures while data remains intact and accessible by correct IP”, not the stated mistake. Here, throughput remains unstable and error recovery consumes time despite no storage volume change.

C:

That consequence concerns “Large I/O requests can stall or retransmit despite apparently healthy small-packet network pings”, which is a different failure. Here, throughput remains unstable and error recovery consumes time despite no storage volume change.

D:

“The network outage persists and security is weakened unnecessarily” does not describe the result of this shortcut. Here, throughput remains unstable and error recovery consumes time despite no storage volume change.

Question 555

For this case—A NAS client experiences intermittent slow copies and the switch reports CRC errors on an ONTAP uplink.—which implementation and acceptance check are correctly paired?

  1. Action: Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. Validation: Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.
  2. Action: Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. Validation: Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.
  3. Action: Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  4. Action: Keep cluster interconnect, intercluster replication, node management and client data networks assigned according to NetApp guidance. Validation: Map each LIF to its service policy and network path and confirm required intercluster connectivity with a safe test relationship.

Explanation

Correct Answer

C:

Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair. The action and test belong together because physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Incorrect Answers

A:

The linked action and check for “troubleshoot failed lif or port reachability from actual evidence” would not resolve this case. The appropriate action is to correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. To confirm, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

B:

That action-and-evidence pair concerns “diagnose mtu mismatches on high-speed ONTAP paths”, not this decision. The appropriate action is to correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. To confirm, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

D:

“understand cluster and intercluster data network roles” evaluates a different intervention. The appropriate action is to correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. To confirm, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

Question 556

A support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. Which implementation or design choice most directly mitigates the stated issue?

  1. Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries.
  2. Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used.
  3. Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions.
  4. Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS.

Explanation

Correct Answer

D:

The situation is that a support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises. To verify, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

Incorrect Answers

A:

That choice concerns “use broadcast domains and ipspaces for appropriate network separation”, not the immediate requirement. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

B:

The proposed action addresses “diagnose mtu mismatches on high-speed ONTAP paths” rather than the problem described. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

C:

“troubleshoot failed lif or port reachability from actual evidence” is related to another task, not the failure shown here. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Question 557

A support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. Which technical explanation most directly supports the right approach?

  1. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.
  2. A down data LIF is a network availability problem that user ACL changes cannot correct.
  3. A link can pass small probes while larger frames are dropped because one device does not support the configured packet size.
  4. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Explanation

Correct Answer

A:

The situation is that a support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises. This supports the decision to correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS.

Incorrect Answers

B:

The principle behind “troubleshoot failed lif or port reachability from actual evidence” is not the one being tested. Here, physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

C:

“diagnose mtu mismatches on high-speed ONTAP paths” describes another technical distinction. Here, physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

D:

“trace gateway and routing errors for remote storage clients” explains a different mechanism. Here, physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Question 558

For this situation—A support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck.—which check provides the strongest verification?

  1. Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
  2. Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  3. Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.
  4. Run a test from a local and remote client while recording ONTAP network routes and return traffic path.

Explanation

Correct Answer

B:

The situation is that a support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair. It is the relevant test because physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Incorrect Answers

A:

This evidence addresses “choose lif service policies and failover groups for supported protocols” instead of confirming the repair. To check this result, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

C:

That test concerns “troubleshoot failed lif or port reachability from actual evidence”, not the requested outcome. To check this result, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

D:

The proposed check is relevant to “trace gateway and routing errors for remote storage clients”, but not sufficient here. To check this result, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

Question 559

A support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. If the team does the following—"Increase volume IOPS limits to fix a link that is already dropping frames due to a faulty cable or congestion."—what could go wrong?

  1. Large I/O requests can stall or retransmit despite apparently healthy small-packet network pings.
  2. Client services may not reach gateways or violate the intended network separation design.
  3. Throughput remains unstable and error recovery consumes time despite no storage volume change.
  4. Users continue seeing name-based mount failures while data remains intact and accessible by correct IP.

Explanation

Correct Answer

C:

The situation is that a support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. Throughput remains unstable and error recovery consumes time despite no storage volume change. The shortcut is unsafe because physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Incorrect Answers

A:

“Large I/O requests can stall or retransmit despite apparently healthy small-packet network pings” can arise elsewhere, but it is not the most direct risk here. Here, throughput remains unstable and error recovery consumes time despite no storage volume change.

B:

That consequence concerns “Client services may not reach gateways or violate the intended network separation design”, which is a different failure. Here, throughput remains unstable and error recovery consumes time despite no storage volume change.

D:

The situation is that a support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. The alternative risk relates to “Users continue seeing name-based mount failures while data remains intact and accessible by correct IP”, not the stated mistake. Here, throughput remains unstable and error recovery consumes time despite no storage volume change.

Question 560

A support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. Which action and validation evidence belong together?

  1. Action: Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior. Validation: Simulate a permitted port outage and verify an NFS client reconnects using the supported LIF failover behavior.
  2. Action: Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. Validation: Run a test from a local and remote client while recording ONTAP network routes and return traffic path.
  3. Action: Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. Validation: Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.
  4. Action: Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

Explanation

Correct Answer

D:

The situation is that a support engineer compares LIF latency with switch packet drops to identify a network transport bottleneck. Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair. The action and test belong together because physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Incorrect Answers

A:

That action-and-evidence pair concerns “choose lif service policies and failover groups for supported protocols”, not this decision. The appropriate action is to correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. To confirm, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

B:

The proposed pair focuses on “trace gateway and routing errors for remote storage clients” instead. The appropriate action is to correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. To confirm, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

C:

“test DNS dependencies separately from raw IP connectivity” evaluates a different intervention. The appropriate action is to correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. To confirm, collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests