Practice Exams:

Network Appliance NS0-165 Dumps

EXAM: NetApp Certified Data Administrator, ONTAP
Verified By Experts
Premium Bundle
$49.99

NS0-165 Premium ETE File


  • Premium File 60 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Network Appliance NS0-165 Practice Test 54

Question 530

A data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. Which action and validation evidence belong together?

  1. Action: Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. Validation: Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
  2. Action: Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. Validation: Run a test from a local and remote client while recording ONTAP network routes and return traffic path.
  3. Action: Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  4. Action: Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. Validation: Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.

Explanation

Correct Answer

B:

The situation is that a data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. Validation: Run a test from a local and remote client while recording ONTAP network routes and return traffic path. The action and test belong together because an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Incorrect Answers

A:

“plan tagged VLAN interfaces for storage client networks” evaluates a different intervention. The appropriate action is to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. To confirm, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

C:

That action-and-evidence pair concerns “use packet errors and switch counters to isolate poor network performance”, not this decision. The appropriate action is to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. To confirm, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

D:

The proposed pair focuses on “diagnose mtu mismatches on high-speed ONTAP paths” instead. The appropriate action is to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. To confirm, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

Question 531

During an enterprise ONTAP operations review, An SMB hostname starts resolving to an old LIF address following a planned SVM network migration. What is the most appropriate next decision?

  1. Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions.
  2. Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries.
  3. Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon.
  4. Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode.

Explanation

Correct Answer

C:

Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning. To verify, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

Incorrect Answers

A:

This alternative focuses on “troubleshoot failed lif or port reachability from actual evidence” instead of the required outcome. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

B:

That choice concerns “trace gateway and routing errors for remote storage clients”, not the immediate requirement. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

D:

“use interface groups only with matching switch link configuration” is related to another task, not the failure shown here. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Question 532

An SMB hostname starts resolving to an old LIF address following a planned SVM network migration. Why does the recommended approach address this particular concern?

  1. A link can pass small probes while larger frames are dropped because one device does not support the configured packet size.
  2. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.
  3. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.
  4. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Explanation

Correct Answer

D:

A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning. This supports the decision to compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon.

Incorrect Answers

A:

“diagnose mtu mismatches on high-speed ONTAP paths” explains a different mechanism. Here, a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

B:

That statement concerns “trace gateway and routing errors for remote storage clients” rather than the cause in this case. Here, a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

C:

The principle behind “use packet errors and switch counters to isolate poor network performance” is not the one being tested. Here, a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Question 533

An SMB hostname starts resolving to an old LIF address following a planned SVM network migration. Which evidence best validates the proposed outcome?

  1. Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.
  2. Run a test from a local and remote client while recording ONTAP network routes and return traffic path.
  3. Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.
  4. Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

Explanation

Correct Answer

A:

Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails. It is the relevant test because a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Incorrect Answers

B:

This evidence addresses “trace gateway and routing errors for remote storage clients” instead of confirming the repair. To check this result, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

C:

“diagnose mtu mismatches on high-speed ONTAP paths” would verify a different part of the system. To check this result, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

D:

That test concerns “use packet errors and switch counters to isolate poor network performance”, not the requested outcome. To check this result, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

Question 534

Consider this situation: An SMB hostname starts resolving to an old LIF address following a planned SVM network migration. A team member suggests: "Rebuild a working volume because the workstation cannot resolve the server name following a DNS record change." What is the main risk?

  1. Remote users remain disconnected while access policies become overly permissive.
  2. Users continue seeing name-based mount failures while data remains intact and accessible by correct IP.
  3. Client services may not reach gateways or violate the intended network separation design.
  4. Throughput remains unstable and error recovery consumes time despite no storage volume change.

Explanation

Correct Answer

B:

Users continue seeing name-based mount failures while data remains intact and accessible by correct IP. The shortcut is unsafe because a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Incorrect Answers

A:

The alternative risk relates to “Remote users remain disconnected while access policies become overly permissive”, not the stated mistake. Here, users continue seeing name-based mount failures while data remains intact and accessible by correct IP.

C:

That consequence concerns “Client services may not reach gateways or violate the intended network separation design”, which is a different failure. Here, users continue seeing name-based mount failures while data remains intact and accessible by correct IP.

D:

“Throughput remains unstable and error recovery consumes time despite no storage volume change” does not describe the result of this shortcut. Here, users continue seeing name-based mount failures while data remains intact and accessible by correct IP.

Question 535

A storage operations lead considers: An SMB hostname starts resolving to an old LIF address following a planned SVM network migration. Which response and evidence should be linked?

  1. Action: Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. Validation: Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.
  2. Action: Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. Validation: Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.
  3. Action: Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. Validation: Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.
  4. Action: Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.

Explanation

Correct Answer

C:

Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. Validation: Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails. The action and test belong together because a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Incorrect Answers

A:

The linked action and check for “diagnose mtu mismatches on high-speed ONTAP paths” would not resolve this case. The appropriate action is to compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. To confirm, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

B:

That action-and-evidence pair concerns “troubleshoot failed lif or port reachability from actual evidence”, not this decision. The appropriate action is to compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. To confirm, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

D:

“use packet errors and switch counters to isolate poor network performance” evaluates a different intervention. The appropriate action is to compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. To confirm, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

Question 536

A support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. Which action best addresses this requirement?

  1. Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS.
  2. Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions.
  3. Place NAS data LIFs on suitable physical ports and supported failover groups or service policies while respecting SAN LIF path behavior.
  4. Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon.

Explanation

Correct Answer

D:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning. To verify, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

Incorrect Answers

A:

That choice concerns “use packet errors and switch counters to isolate poor network performance”, not the immediate requirement. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

B:

The proposed action addresses “troubleshoot failed lif or port reachability from actual evidence” rather than the problem described. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

C:

“choose lif service policies and failover groups for supported protocols” is related to another task, not the failure shown here. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Question 537

A NetApp storage engineer considers: A support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. Which underlying principle applies?

  1. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.
  2. Replication and cluster membership traffic have separate dependencies from ordinary client NFS/SMB paths; a shared subnet should not be assumed universally safe.
  3. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.
  4. A link can pass small probes while larger frames are dropped because one device does not support the configured packet size.

Explanation

Correct Answer

A:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning. This supports the decision to compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon.

Incorrect Answers

B:

The principle behind “understand cluster and intercluster data network roles” is not the one being tested. Here, a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

C:

“use packet errors and switch counters to isolate poor network performance” describes another technical distinction. Here, a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

D:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. “diagnose mtu mismatches on high-speed ONTAP paths” explains a different mechanism. Here, a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Question 538

A support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. What should the team examine before accepting the result?

  1. Run a test from a local and remote client while recording ONTAP network routes and return traffic path.
  2. Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.
  3. Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  4. Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.

Explanation

Correct Answer

B:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails. It is the relevant test because a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Incorrect Answers

A:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. This evidence addresses “trace gateway and routing errors for remote storage clients” instead of confirming the repair. To check this result, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

C:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. That test concerns “use packet errors and switch counters to isolate poor network performance”, not the requested outcome. To check this result, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

D:

The proposed check is relevant to “troubleshoot failed lif or port reachability from actual evidence”, but not sufficient here. To check this result, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

Question 539

A support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. The proposed shortcut is: "Rebuild a working volume because the workstation cannot resolve the server name following a DNS record change." Which failure is most likely?

  1. Large I/O requests can stall or retransmit despite apparently healthy small-packet network pings.
  2. Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections.
  3. Users continue seeing name-based mount failures while data remains intact and accessible by correct IP.
  4. Remote users remain disconnected while access policies become overly permissive.

Explanation

Correct Answer

C:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. Users continue seeing name-based mount failures while data remains intact and accessible by correct IP. The shortcut is unsafe because a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Incorrect Answers

A:

“Large I/O requests can stall or retransmit despite apparently healthy small-packet network pings” can arise elsewhere, but it is not the most direct risk here. Here, users continue seeing name-based mount failures while data remains intact and accessible by correct IP.

B:

That consequence concerns “Traffic may fail or flap across member ports despite the storage controller reporting multiple physical connections”, which is a different failure. Here, users continue seeing name-based mount failures while data remains intact and accessible by correct IP.

D:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. The alternative risk relates to “Remote users remain disconnected while access policies become overly permissive”, not the stated mistake. Here, users continue seeing name-based mount failures while data remains intact and accessible by correct IP.

Question 540

For this case—A support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface.—which implementation and acceptance check are correctly paired?

  1. Action: Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. Validation: Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.
  2. Action: Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries. Validation: Inspect ONTAP port membership and a controlled client-network reachability test for the intended SVM data LIF.
  3. Action: Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. Validation: Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.
  4. Action: Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. Validation: Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

Explanation

Correct Answer

D:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. Validation: Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails. The action and test belong together because a failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.

Incorrect Answers

A:

The situation is that a support engineer needs to separate DNS failure from NFS service failure on an otherwise reachable ONTAP interface. That action-and-evidence pair concerns “troubleshoot failed lif or port reachability from actual evidence”, not this decision. The appropriate action is to compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. To confirm, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

B:

The proposed pair focuses on “use broadcast domains and ipspaces for appropriate network separation” instead. The appropriate action is to compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. To confirm, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

C:

“diagnose mtu mismatches on high-speed ONTAP paths” evaluates a different intervention. The appropriate action is to compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. To confirm, resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests