Practice Exams:

Network Appliance NS0-165 Dumps

EXAM: NetApp Certified Data Administrator, ONTAP
Verified By Experts
Premium Bundle
$49.99

NS0-165 Premium ETE File


  • Premium File 60 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Network Appliance NS0-165 Practice Test 53

Question 520

A storage operations lead considers: A storage administrator sees a healthy FlexVol but an application subnet loses access after switch maintenance. Which response and evidence should be linked?

  1. Action: Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  2. Action: Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. Validation: Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.
  3. Action: Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. Validation: Run a test from a local and remote client while recording ONTAP network routes and return traffic path.
  4. Action: Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. Validation: Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.

Explanation

Correct Answer

D:

The situation is that a storage administrator sees a healthy FlexVol but an application subnet loses access after switch maintenance. Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. Validation: Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe. The action and test belong together because a down data LIF is a network availability problem that user ACL changes cannot correct.

Incorrect Answers

A:

That action-and-evidence pair concerns “use packet errors and switch counters to isolate poor network performance”, not this decision. The appropriate action is to check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. To confirm, compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.

B:

The proposed pair focuses on “test DNS dependencies separately from raw IP connectivity” instead. The appropriate action is to check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. To confirm, compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.

C:

The situation is that a storage administrator sees a healthy FlexVol but an application subnet loses access after switch maintenance. “trace gateway and routing errors for remote storage clients” evaluates a different intervention. The appropriate action is to check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions. To confirm, compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.

Question 521

An SVM serves local hosts correctly but remote offices time out after a routing change. Which action best addresses this requirement?

  1. Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries.
  2. Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used.
  3. Check LIF administrative and operational state, home port, VLAN membership and physical link health before editing application permissions.
  4. Configure supported ONTAP interface groups and corresponding switch LACP or non-LACP behavior according to the chosen mode.

Explanation

Correct Answer

A:

Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses. To verify, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

Incorrect Answers

B:

“diagnose mtu mismatches on high-speed ONTAP paths” is related to another task, not the failure shown here. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

C:

This alternative focuses on “troubleshoot failed lif or port reachability from actual evidence” instead of the required outcome. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

D:

That choice concerns “use interface groups only with matching switch link configuration”, not the immediate requirement. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Question 522

A NetApp storage engineer considers: An SVM serves local hosts correctly but remote offices time out after a routing change. Which underlying principle applies?

  1. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.
  2. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.
  3. A down data LIF is a network availability problem that user ACL changes cannot correct.
  4. A link can pass small probes while larger frames are dropped because one device does not support the configured packet size.

Explanation

Correct Answer

B:

An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses. This supports the decision to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries.

Incorrect Answers

A:

The principle behind “test DNS dependencies separately from raw IP connectivity” is not the one being tested. Here, an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

C:

“troubleshoot failed lif or port reachability from actual evidence” explains a different mechanism. Here, an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

D:

That statement concerns “diagnose mtu mismatches on high-speed ONTAP paths” rather than the cause in this case. Here, an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Question 523

An SVM serves local hosts correctly but remote offices time out after a routing change. What should the team examine before accepting the result?

  1. Compare ONTAP network interface status with switch link counters and a synthetic client connectivity probe.
  2. Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.
  3. Run a test from a local and remote client while recording ONTAP network routes and return traffic path.
  4. Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.

Explanation

Correct Answer

C:

Run a test from a local and remote client while recording ONTAP network routes and return traffic path. It is the relevant test because an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Incorrect Answers

A:

“troubleshoot failed lif or port reachability from actual evidence” would verify a different part of the system. To check this result, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

B:

That test concerns “test DNS dependencies separately from raw IP connectivity”, not the requested outcome. To check this result, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

D:

This evidence addresses “diagnose mtu mismatches on high-speed ONTAP paths” instead of confirming the repair. To check this result, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

Question 524

An SVM serves local hosts correctly but remote offices time out after a routing change. The proposed shortcut is: "Change SMB share ACLs repeatedly because only clients from another subnet cannot contact the storage service." Which failure is most likely?

  1. The network outage persists and security is weakened unnecessarily.
  2. Users continue seeing name-based mount failures while data remains intact and accessible by correct IP.
  3. Throughput remains unstable and error recovery consumes time despite no storage volume change.
  4. Remote users remain disconnected while access policies become overly permissive.

Explanation

Correct Answer

D:

Remote users remain disconnected while access policies become overly permissive. The shortcut is unsafe because an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Incorrect Answers

A:

That consequence concerns “The network outage persists and security is weakened unnecessarily”, which is a different failure. Here, remote users remain disconnected while access policies become overly permissive.

B:

“Users continue seeing name-based mount failures while data remains intact and accessible by correct IP” does not describe the result of this shortcut. Here, remote users remain disconnected while access policies become overly permissive.

C:

The alternative risk relates to “Throughput remains unstable and error recovery consumes time despite no storage volume change”, not the stated mistake. Here, remote users remain disconnected while access policies become overly permissive.

Question 525

For this case—An SVM serves local hosts correctly but remote offices time out after a routing change.—which implementation and acceptance check are correctly paired?

  1. Action: Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. Validation: Run a test from a local and remote client while recording ONTAP network routes and return traffic path.
  2. Action: Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. Validation: Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.
  3. Action: Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  4. Action: Compare client DNS lookup, SVM name-service reachability and direct IP connectivity before blaming a storage protocol daemon. Validation: Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.

Explanation

Correct Answer

A:

Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. Validation: Run a test from a local and remote client while recording ONTAP network routes and return traffic path. The action and test belong together because an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Incorrect Answers

B:

“diagnose mtu mismatches on high-speed ONTAP paths” evaluates a different intervention. The appropriate action is to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. To confirm, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

C:

The linked action and check for “use packet errors and switch counters to isolate poor network performance” would not resolve this case. The appropriate action is to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. To confirm, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

D:

That action-and-evidence pair concerns “test DNS dependencies separately from raw IP connectivity”, not this decision. The appropriate action is to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. To confirm, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

Question 526

A data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. Which implementation or design choice most directly mitigates the stated issue?

  1. Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS.
  2. Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries.
  3. Configure ONTAP broadcast domains and IPspaces to reflect the intended network reachability and tenant routing boundaries.
  4. Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used.

Explanation

Correct Answer

B:

The situation is that a data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses. To verify, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

Incorrect Answers

A:

“use packet errors and switch counters to isolate poor network performance” is related to another task, not the failure shown here. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

C:

That choice concerns “use broadcast domains and ipspaces for appropriate network separation”, not the immediate requirement. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

D:

The proposed action addresses “diagnose mtu mismatches on high-speed ONTAP paths” rather than the problem described. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Question 527

A data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. Which technical explanation most directly supports the right approach?

  1. A failed hostname lookup can mimic an unavailable file service even when the storage LIF and transport are functioning.
  2. Different ONTAP protocol services have different LIF mobility and host path expectations; one blanket failover design is unsafe.
  3. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.
  4. Physical or logical network errors can degrade throughput even when backend disks are healthy and response time rises.

Explanation

Correct Answer

C:

The situation is that a data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. An interface may answer same-subnet clients while default gateway or route errors block off-subnet responses. This supports the decision to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries.

Incorrect Answers

A:

“test DNS dependencies separately from raw IP connectivity” describes another technical distinction. Here, an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

B:

“choose lif service policies and failover groups for supported protocols” explains a different mechanism. Here, an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

D:

The principle behind “use packet errors and switch counters to isolate poor network performance” is not the one being tested. Here, an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Question 528

For this situation—A data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network.—which check provides the strongest verification?

  1. Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
  2. Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  3. Resolve a test SMB or NFS hostname and then connect by a verified IP, recording which operation fails.
  4. Run a test from a local and remote client while recording ONTAP network routes and return traffic path.

Explanation

Correct Answer

D:

The situation is that a data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. Run a test from a local and remote client while recording ONTAP network routes and return traffic path. It is the relevant test because an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Incorrect Answers

A:

That test concerns “plan tagged VLAN interfaces for storage client networks”, not the requested outcome. To check this result, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

B:

The proposed check is relevant to “use packet errors and switch counters to isolate poor network performance”, but not sufficient here. To check this result, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

C:

This evidence addresses “test DNS dependencies separately from raw IP connectivity” instead of confirming the repair. To check this result, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

Question 529

A data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. If the team does the following—"Change SMB share ACLs repeatedly because only clients from another subnet cannot contact the storage service."—what could go wrong?

  1. Remote users remain disconnected while access policies become overly permissive.
  2. The network outage persists and security is weakened unnecessarily.
  3. Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access.
  4. Throughput remains unstable and error recovery consumes time despite no storage volume change.

Explanation

Correct Answer

A:

The situation is that a data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. Remote users remain disconnected while access policies become overly permissive. The shortcut is unsafe because an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Incorrect Answers

B:

The alternative risk relates to “The network outage persists and security is weakened unnecessarily”, not the stated mistake. Here, remote users remain disconnected while access policies become overly permissive.

C:

“Snapshots may accumulate at the source without reaching the secondary cluster despite normal local client access” can arise elsewhere, but it is not the most direct risk here. Here, remote users remain disconnected while access policies become overly permissive.

D:

That consequence concerns “Throughput remains unstable and error recovery consumes time despite no storage volume change”, which is a different failure. Here, remote users remain disconnected while access policies become overly permissive.

Question 530

A data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. Which action and validation evidence belong together?

  1. Action: Use supported VLAN interfaces on ONTAP physical or interface-group ports when tagged network segmentation matches switch configuration. Validation: Validate port VLAN assignments, tagged trunk allowances and a test client mount to the correct SVM address.
  2. Action: Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. Validation: Run a test from a local and remote client while recording ONTAP network routes and return traffic path.
  3. Action: Correlate ONTAP port error counters, switch discards and client retransmits before modifying volume-level storage QoS. Validation: Collect link counters under a synthetic large-file read and confirm the counters normalize after a permitted network repair.
  4. Action: Confirm end-to-end supported MTU and interface settings for host, storage and switch paths when jumbo frames are used. Validation: Run a controlled size-appropriate network test and inspect switch drops and ONTAP port counters across the full path.

Explanation

Correct Answer

B:

The situation is that a data center adds a new application subnet and fails to add an appropriate route for its ONTAP SVM data network. Verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. Validation: Run a test from a local and remote client while recording ONTAP network routes and return traffic path. The action and test belong together because an interface may answer same-subnet clients while default gateway or route errors block off-subnet responses.

Incorrect Answers

A:

“plan tagged VLAN interfaces for storage client networks” evaluates a different intervention. The appropriate action is to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. To confirm, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

C:

That action-and-evidence pair concerns “use packet errors and switch counters to isolate poor network performance”, not this decision. The appropriate action is to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. To confirm, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

D:

The proposed pair focuses on “diagnose mtu mismatches on high-speed ONTAP paths” instead. The appropriate action is to verify ONTAP routes, SVM IPspace and client source subnet connectivity when traffic crosses network boundaries. To confirm, run a test from a local and remote client while recording ONTAP network routes and return traffic path.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests