Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 13

Question 120

At a public utility operations center, the network engineering team reports that an access switch stack unexpectedly loses one member after a maintenance window. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Simulate an approved link outage and inspect active-member elections
  2. Verify the VSX ISL and its correct LAG members before altering downstream VLANs
  3. Inspect VSF link topology, member IDs and compatible software before recovery
  4. Check the supported state synchronization and maintenance sequence for that platform
  5. Examine VSF topology and restore the missing member safely

Explanation

Correct Answers

C:

The selected action is Inspect VSF link topology, member IDs and compatible software before recovery.

E:

The selected action is Examine VSF topology and restore the missing member safely.

Incorrect Answers

A:

The proposed alternative—simulate an approved link outage and inspect active-member elections—does not address this requirement. Stack stability depends on correct member interconnects and coordinated state.

B:

The proposed alternative—verify the VSX ISL and its correct LAG members before altering downstream VLANs—does not address this requirement. Stack stability depends on correct member interconnects and coordinated state.

D:

The proposed alternative—check the supported state synchronization and maintenance sequence for that platform—does not address this requirement. Stack stability depends on correct member interconnects and coordinated state.

Question 121

At a large hotel conference complex, the network operations team reports that two stack segments independently believe they are active after their interconnect is cut. Which configuration or operating decision most directly addresses the issue?

  1. Assign and verify primary and secondary spanning-tree root priorities for intended VLANs
  2. Compare tracked objects, priorities and preemption policy on the redundant pair
  3. Use the intended LAG or spanning-tree design instead of unmanaged parallel links
  4. Apply the supported split-detection design and controlled recovery procedure

Explanation

Correct Answer

D:

Apply the supported split-detection design and controlled recovery procedure. Split detection prevents conflicting active control during stack partitions. Confirm the result using this test: Simulate an approved link outage and inspect active-member elections.

Incorrect Answers

A:

The proposed alternative—assign and verify primary and secondary spanning-tree root priorities for intended VLANs—does not address this requirement. Split detection prevents conflicting active control during stack partitions.

B:

The proposed alternative—compare tracked objects, priorities and preemption policy on the redundant pair—does not address this requirement. Split detection prevents conflicting active control during stack partitions.

C:

The proposed alternative—use the intended LAG or spanning-tree design instead of unmanaged parallel links—does not address this requirement. Split detection prevents conflicting active control during stack partitions.

Question 122

At a large hotel conference complex, the network operations team reports that two stack segments independently believe they are active after their interconnect is cut. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume a powered AP means client data tunnels always have a viable gateway
  2. Raise all priorities to the same value without validating tracked interfaces
  3. Route keepalive only across the same failed ISL and call it independent
  4. Rejoin live partitions blindly without checking active control ownership

Explanation

Correct Answer

D:

The shortcut at issue is to rejoin live partitions blindly without checking active control ownership. Split detection prevents conflicting active control during stack partitions. The corrective choice is: Apply the supported split-detection design and controlled recovery procedure.

Incorrect Answers

A:

The shortcut to assume a powered AP means client data tunnels always have a viable gateway is not the error in this case. The actual risk comes from rejoin live partitions blindly without checking active control ownership.

B:

The shortcut to raise all priorities to the same value without validating tracked interfaces is not the error in this case. The actual risk comes from rejoin live partitions blindly without checking active control ownership.

C:

The shortcut to route keepalive only across the same failed ISL and call it independent is not the error in this case. The actual risk comes from rejoin live partitions blindly without checking active control ownership.

Question 123

At a large hotel conference complex, the network operations team reports that two stack segments independently believe they are active after their interconnect is cut. Which technical reasoning most specifically justifies the recommended solution?

  1. Split detection prevents conflicting active control during stack partitions
  2. Wireless control connectivity and user traffic forwarding can fail separately
  3. Stack stability depends on correct member interconnects and coordinated state
  4. Resiliency peers need compatible software and consistent shared settings

Explanation

Correct Answer

A:

Split detection prevents conflicting active control during stack partitions. This is the technical reason behind the proposed approach: “Apply the supported split-detection design and controlled recovery procedure”. The result should be checked by “Simulate an approved link outage and inspect active-member elections”.

Incorrect Answers

B:

The proposed alternative—wireless control connectivity and user traffic forwarding can fail separately—does not address this requirement. Split detection prevents conflicting active control during stack partitions.

C:

The proposed alternative—stack stability depends on correct member interconnects and coordinated state—does not address this requirement. Split detection prevents conflicting active control during stack partitions.

D:

The proposed alternative—resiliency peers need compatible software and consistent shared settings—does not address this requirement. Split detection prevents conflicting active control during stack partitions.

Question 124

At a large hotel conference complex, the network operations team reports that two stack segments independently believe they are active after their interconnect is cut. Which test would most directly show that the requested outcome was achieved?

  1. Fail the upstream path and record active gateway behavior
  2. Simulate an approved link outage and inspect active-member elections
  3. Inspect ISL state and VSX consistency diagnostics on both peers
  4. Validate synchronization and shared forwarding in a lab failover

Explanation

Correct Answer

B:

The outcome check is to simulate an approved link outage and inspect active-member elections. It measures whether the stated requirement was met. Split detection prevents conflicting active control during stack partitions.

Incorrect Answers

A:

The suggested check—fail the upstream path and record active gateway behavior—does not test the required result. Instead, simulate an approved link outage and inspect active-member elections.

C:

The suggested check—inspect ISL state and VSX consistency diagnostics on both peers—does not test the required result. Instead, simulate an approved link outage and inspect active-member elections.

D:

The suggested check—validate synchronization and shared forwarding in a lab failover—does not test the required result. Instead, simulate an approved link outage and inspect active-member elections.

Question 125

At a large hotel conference complex, the network operations team reports that two stack segments independently believe they are active after their interconnect is cut. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Monitor appropriate upstream health and couple it to gateway failover policy
  2. Run a controlled switchover and measure representative session recovery
  3. Configure a resilient virtual gateway mechanism with monitored upstream reachability
  4. Simulate an approved link outage and inspect active-member elections
  5. Apply the supported split-detection design and controlled recovery procedure

Explanation

Correct Answers

D:

The selected action is Simulate an approved link outage and inspect active-member elections. Its matching outcome check is to simulate an approved link outage and inspect active-member elections.

E:

The selected action is Apply the supported split-detection design and controlled recovery procedure. Its matching outcome check is to simulate an approved link outage and inspect active-member elections.

Incorrect Answers

A:

The proposed alternative—monitor appropriate upstream health and couple it to gateway failover policy—does not address this requirement. Split detection prevents conflicting active control during stack partitions.

B:

The proposed alternative—run a controlled switchover and measure representative session recovery—does not address this requirement. Split detection prevents conflicting active control during stack partitions.

C:

The proposed alternative—configure a resilient virtual gateway mechanism with monitored upstream reachability—does not address this requirement. Split detection prevents conflicting active control during stack partitions.

Question 126

At a research laboratory building, the network operations team reports that a dual-homed access switch loses traffic when one aggregation peer is shut down. Which configuration or operating decision most directly addresses the issue?

  1. Configure the supported multichassis LAG arrangement with synchronized member settings
  2. Assign and verify primary and secondary spanning-tree root priorities for intended VLANs
  3. Verify member identity, software compatibility and current approved group configuration
  4. Configure supported AP gateway redundancy and verify tunnel/session recovery

Explanation

Correct Answer

A:

Configure the supported multichassis LAG arrangement with synchronized member settings. A proper VSX MC-LAG provides links to both peers under one downstream LAG. Confirm the result using this test: Test a controlled peer failure and inspect LACP and forwarding.

Incorrect Answers

B:

The proposed alternative—assign and verify primary and secondary spanning-tree root priorities for intended VLANs—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

C:

The proposed alternative—verify member identity, software compatibility and current approved group configuration—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

D:

The proposed alternative—configure supported AP gateway redundancy and verify tunnel/session recovery—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

Question 127

At a research laboratory building, the network operations team reports that a dual-homed access switch loses traffic when one aggregation peer is shut down. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume two configured gateways automatically replicate all TCP states
  2. Build unrelated static trunks with the same LAG ID but no coordination
  3. Assume a powered AP means client data tunnels always have a viable gateway
  4. Configure conflicting gateway MAC values for the same shared VLAN

Explanation

Correct Answer

B:

The shortcut at issue is to build unrelated static trunks with the same LAG ID but no coordination. A proper VSX MC-LAG provides links to both peers under one downstream LAG. The corrective choice is: Configure the supported multichassis LAG arrangement with synchronized member settings.

Incorrect Answers

A:

The shortcut to assume two configured gateways automatically replicate all TCP states is not the error in this case. The actual risk comes from build unrelated static trunks with the same LAG ID but no coordination.

C:

The shortcut to assume a powered AP means client data tunnels always have a viable gateway is not the error in this case. The actual risk comes from build unrelated static trunks with the same LAG ID but no coordination.

D:

The shortcut to configure conflicting gateway MAC values for the same shared VLAN is not the error in this case. The actual risk comes from build unrelated static trunks with the same LAG ID but no coordination.

Question 128

At a research laboratory building, the network operations team reports that a dual-homed access switch loses traffic when one aggregation peer is shut down. Which technical reasoning most specifically justifies the recommended solution?

  1. Split detection prevents conflicting active control during stack partitions
  2. A proper VSX MC-LAG provides links to both peers under one downstream LAG
  3. Device uptime alone cannot prove the forwarding service is available
  4. Redundant hardware does not guarantee every session survives a takeover

Explanation

Correct Answer

B:

A proper VSX MC-LAG provides links to both peers under one downstream LAG. This is the technical reason behind the proposed approach: “Configure the supported multichassis LAG arrangement with synchronized member settings”. The result should be checked by “Test a controlled peer failure and inspect LACP and forwarding”.

Incorrect Answers

A:

The proposed alternative—split detection prevents conflicting active control during stack partitions—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

C:

The proposed alternative—device uptime alone cannot prove the forwarding service is available—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

D:

The proposed alternative—redundant hardware does not guarantee every session survives a takeover—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

Question 129

At a research laboratory building, the network operations team reports that a dual-homed access switch loses traffic when one aggregation peer is shut down. Which test would most directly show that the requested outcome was achieved?

  1. Inspect ISL state and VSX consistency diagnostics on both peers
  2. Test a controlled peer failure and inspect LACP and forwarding
  3. Fail the upstream path and record active gateway behavior
  4. Examine VSF topology and restore the missing member safely

Explanation

Correct Answer

B:

The outcome check is to test a controlled peer failure and inspect LACP and forwarding. It measures whether the stated requirement was met. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

Incorrect Answers

A:

The suggested check—inspect ISL state and VSX consistency diagnostics on both peers—does not test the required result. Instead, test a controlled peer failure and inspect LACP and forwarding.

C:

The suggested check—fail the upstream path and record active gateway behavior—does not test the required result. Instead, test a controlled peer failure and inspect LACP and forwarding.

D:

The suggested check—examine VSF topology and restore the missing member safely—does not test the required result. Instead, test a controlled peer failure and inspect LACP and forwarding.

Question 130

At a research laboratory building, the network operations team reports that a dual-homed access switch loses traffic when one aggregation peer is shut down. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Configure the supported multichassis LAG arrangement with synchronized member settings
  2. Verify the VSX ISL and its correct LAG members before altering downstream VLANs
  3. Configure a resilient virtual gateway mechanism with monitored upstream reachability
  4. Reproduce the event and inspect priority and active role history
  5. Test a controlled peer failure and inspect LACP and forwarding

Explanation

Correct Answers

A:

The selected action is Configure the supported multichassis LAG arrangement with synchronized member settings. Its matching outcome check is to test a controlled peer failure and inspect LACP and forwarding.

E:

The selected action is Test a controlled peer failure and inspect LACP and forwarding. Its matching outcome check is to test a controlled peer failure and inspect LACP and forwarding.

Incorrect Answers

B:

The proposed alternative—verify the VSX ISL and its correct LAG members before altering downstream VLANs—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

C:

The proposed alternative—configure a resilient virtual gateway mechanism with monitored upstream reachability—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

D:

The proposed alternative—reproduce the event and inspect priority and active role history—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests