HP HPE7-A01 Dumps
HP HPE7-A01 Practice Test 11
Question 100
At a research laboratory building, the network operations team reports that an installed access switch differs from its approved campus baseline following local maintenance. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Generate a targeted configuration diff and confirm service after remediation.
The selected action is Compare running configuration with the canonical template and review the authorized change.
Incorrect Answers
The proposed alternative—check facility power, PoE load, environmental limits and hardware logs—does not address this requirement. Configuration drift must be reconciled against an actual approved revision.
The proposed alternative—compare allowed VLANs and management connectivity at both ends—does not address this requirement. Configuration drift must be reconciled against an actual approved revision.
The proposed alternative—separate common configuration from validated per-site addresses and interfaces—does not address this requirement. Configuration drift must be reconciled against an actual approved revision.
Question 101
At a multi-floor office campus, the campus engineering team reports that a newly deployed access closet has repeated switch restarts after adding APs. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Check facility power, PoE load, environmental limits and hardware logs. Operational readiness includes rack power and thermal conditions as well as configuration. Confirm the result using this test: Correlate uptime reset events with power and temperature telemetry.
Incorrect Answers
The proposed alternative—compare running configuration with the canonical template and review the authorized change—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
The proposed alternative—test DNS lookup and resolver reachability before changing layer-3 routes—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
The proposed alternative—pilot the template on representative hardware and stage rollout with rollback points—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
Question 102
At a multi-floor office campus, the campus engineering team reports that a newly deployed access closet has repeated switch restarts after adding APs. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to treat all unexpected reboots as routing-protocol convergence problems. The corrective choice is: Check facility power, PoE load, environmental limits and hardware logs.
Incorrect Answers
The shortcut to assume matching connector shape implies compatible wavelengths is not the error in this case. The actual risk comes from treat all unexpected reboots as routing-protocol convergence problems.
The shortcut to force maximum speed on one side without checking the remote interface is not the error in this case. The actual risk comes from treat all unexpected reboots as routing-protocol convergence problems.
The shortcut to change default gateway metrics without checking DNS response content is not the error in this case. The actual risk comes from treat all unexpected reboots as routing-protocol convergence problems.
Question 103
At a multi-floor office campus, the campus engineering team reports that a newly deployed access closet has repeated switch restarts after adding APs. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
Operational readiness includes rack power and thermal conditions as well as configuration. This is the technical reason behind the proposed approach: “Check facility power, PoE load, environmental limits and hardware logs”. The result should be checked by “Correlate uptime reset events with power and temperature telemetry”.
Incorrect Answers
The proposed alternative—physical carrier does not guarantee the intended VLAN is transported—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
The proposed alternative—address assignment alone does not establish controller or cloud discovery—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
The proposed alternative—matching optical characteristics and supported transceivers are required for physical service—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
Question 104
At a multi-floor office campus, the campus engineering team reports that a newly deployed access closet has repeated switch restarts after adding APs. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to correlate uptime reset events with power and temperature telemetry. It measures whether the stated requirement was met.
Incorrect Answers
The proposed alternative—review DHCP discover-offer exchanges and free lease counts—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
The proposed alternative—compare allowed VLANs and management connectivity at both ends—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
The proposed alternative—trace management-originated packets and the selected next hop—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
Question 105
At a multi-floor office campus, the campus engineering team reports that a newly deployed access closet has repeated switch restarts after adding APs. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Correlate uptime reset events with power and temperature telemetry.
The selected action is Check facility power, PoE load, environmental limits and hardware logs.
Incorrect Answers
The proposed alternative—use LLDP neighbor identities and physical port observations to reconcile cabling—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
The proposed alternative—inspect scope utilization, exclusions and lease behavior before expanding capacity—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
The proposed alternative—inspect rendered configuration for two sites and verify unique addresses—does not address the current failure. Instead, check facility power, PoE load, environmental limits and hardware logs.
Question 106
At an international convention venue, the wireless support team reports that a campus VSX pair loses consistency following an inter-switch fiber failure. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Verify the VSX ISL and its correct LAG members before altering downstream VLANs. VSX peers depend on a healthy inter-switch link for coordinated operation. Confirm the result using this test: Inspect ISL state and VSX consistency diagnostics on both peers.
Incorrect Answers
The proposed alternative—align the virtual gateway MAC/IP configuration and VLAN context on both peers—does not address the current failure. Instead, verify the VSX ISL and its correct LAG members before altering downstream VLANs.
The proposed alternative—check the supported state synchronization and maintenance sequence for that platform—does not address the current failure. Instead, verify the VSX ISL and its correct LAG members before altering downstream VLANs.
The proposed alternative—assign and verify primary and secondary spanning-tree root priorities for intended VLANs—does not address the current failure. Instead, verify the VSX ISL and its correct LAG members before altering downstream VLANs.
Question 107
At an international convention venue, the wireless support team reports that a campus VSX pair loses consistency following an inter-switch fiber failure. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to assume a working keepalive is a substitute for all ISL data transport. The corrective choice is: Verify the VSX ISL and its correct LAG members before altering downstream VLANs.
Incorrect Answers
The shortcut to give every access port bridge the same root priority and rely on luck is not the error in this case. The actual risk comes from assuming a working keepalive is a substitute for all ISL data transport.
The shortcut to raise all priorities to the same value without validating tracked interfaces is not the error in this case. The actual risk comes from assuming a working keepalive is a substitute for all ISL data transport.
The shortcut to assume a powered AP means client data tunnels always have a viable gateway is not the error in this case. The actual risk comes from assuming a working keepalive is a substitute for all ISL data transport.
Question 108
At an international convention venue, the wireless support team reports that a campus VSX pair loses consistency following an inter-switch fiber failure. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
VSX peers depend on a healthy inter-switch link for coordinated operation. This is the technical reason behind the proposed approach: “Verify the VSX ISL and its correct LAG members before altering downstream VLANs”. The result should be checked by “Inspect ISL state and VSX consistency diagnostics on both peers”.
Incorrect Answers
The proposed alternative—device uptime alone cannot prove the forwarding service is available—does not address the current failure. Instead, verify the VSX ISL and its correct LAG members before altering downstream VLANs.
The proposed alternative—parallel Ethernet paths require a loop-safe control-plane mechanism—does not address the current failure. Instead, verify the VSX ISL and its correct LAG members before altering downstream VLANs.
The proposed alternative—failover policy must reflect service health rather than incidental port changes—does not address the current failure. Instead, verify the VSX ISL and its correct LAG members before altering downstream VLANs.
Question 109
At an international convention venue, the wireless support team reports that a campus VSX pair loses consistency following an inter-switch fiber failure. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to inspect ISL state and VSX consistency diagnostics on both peers. It measures whether the stated requirement was met.
Incorrect Answers
The suggested check—validate synchronization and shared forwarding in a lab failover—does not test the required result. Instead, inspect ISL state and VSX consistency diagnostics on both peers.
The suggested check—test failure of one uplink while monitoring loop and forwarding state—does not test the required result. Instead, inspect ISL state and VSX consistency diagnostics on both peers.
The suggested check—examine VSF topology and restore the missing member safely—does not test the required result. Instead, inspect ISL state and VSX consistency diagnostics on both peers.
Question 110
At an international convention venue, the wireless support team reports that a campus VSX pair loses consistency following an inter-switch fiber failure. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Verify the VSX ISL and its correct LAG members before altering downstream VLANs. Its matching outcome check is to inspect ISL state and VSX consistency diagnostics on both peers.
The selected action is Inspect ISL state and VSX consistency diagnostics on both peers. Its matching outcome check is to inspect ISL state and VSX consistency diagnostics on both peers.
Incorrect Answers
The proposed alternative—apply the supported split-detection design and controlled recovery procedure—does not address the current failure. Instead, verify the VSX ISL and its correct LAG members before altering downstream VLANs.
The proposed alternative—check keepalive ping, VSX state and link-failure behavior—does not address the current failure. Instead, verify the VSX ISL and its correct LAG members before altering downstream VLANs.
The proposed alternative—inspect VSF link topology, member IDs and compatible software before recovery—does not address the current failure. Instead, verify the VSX ISL and its correct LAG members before altering downstream VLANs.
HPE Network Campus Access Professional (HPE7-A01) Practice Tests
- HP HPE7-A01 Practice Test 9 - 10 Questions (Last Reviewed 10-Nov-2026)
- HP HPE7-A01 Practice Test 10 - 10 Questions (Last Reviewed 09-Nov-2026)
- HP HPE7-A01 Practice Test 11 - 10 Questions (Last Reviewed 08-Nov-2026)
- HP HPE7-A01 Practice Test 12 - 10 Questions (Last Reviewed 07-Nov-2026)
- HP HPE7-A01 Practice Test 13 - 10 Questions (Last Reviewed 06-Nov-2026)