Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 14

Question 130

At a research laboratory building, the network operations team reports that a dual-homed access switch loses traffic when one aggregation peer is shut down. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Configure the supported multichassis LAG arrangement with synchronized member settings
  2. Verify the VSX ISL and its correct LAG members before altering downstream VLANs
  3. Configure a resilient virtual gateway mechanism with monitored upstream reachability
  4. Reproduce the event and inspect priority and active role history
  5. Test a controlled peer failure and inspect LACP and forwarding

Explanation

Correct Answers

A:

The selected action is Configure the supported multichassis LAG arrangement with synchronized member settings. Its matching outcome check is to test a controlled peer failure and inspect LACP and forwarding.

E:

The selected action is Test a controlled peer failure and inspect LACP and forwarding. Its matching outcome check is to test a controlled peer failure and inspect LACP and forwarding.

Incorrect Answers

B:

The proposed alternative—verify the VSX ISL and its correct LAG members before altering downstream VLANs—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

C:

The proposed alternative—configure a resilient virtual gateway mechanism with monitored upstream reachability—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

D:

The proposed alternative—reproduce the event and inspect priority and active role history—does not address this requirement. A proper VSX MC-LAG provides links to both peers under one downstream LAG.

Question 131

At a multi-floor office campus, the campus engineering team reports that clients lose their default gateway when the active distribution switch fails. Which configuration or operating decision most directly addresses the issue?

  1. Configure a resilient virtual gateway mechanism with monitored upstream reachability
  2. Restore the dedicated VSX keepalive path and review its separation from the ISL
  3. Assign and verify primary and secondary spanning-tree root priorities for intended VLANs
  4. Align the virtual gateway MAC/IP configuration and VLAN context on both peers

Explanation

Correct Answer

A:

Configure a resilient virtual gateway mechanism with monitored upstream reachability. A virtual gateway provides a stable first hop across routing-device failure. Confirm the result using this test: Measure default-gateway reachability during a switch failover.

Incorrect Answers

B:

The proposed alternative—restore the dedicated VSX keepalive path and review its separation from the ISL—does not address this requirement. A virtual gateway provides a stable first hop across routing-device failure.

C:

The proposed alternative—assign and verify primary and secondary spanning-tree root priorities for intended VLANs—does not address this requirement. A virtual gateway provides a stable first hop across routing-device failure.

D:

The proposed alternative—align the virtual gateway MAC/IP configuration and VLAN context on both peers—does not address this requirement. A virtual gateway provides a stable first hop across routing-device failure.

Question 132

At a multi-floor office campus, the campus engineering team reports that clients lose their default gateway when the active distribution switch fails. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume a powered AP means client data tunnels always have a viable gateway
  2. Assume two configured gateways automatically replicate all TCP states
  3. Set the same physical IP manually on two independent gateways
  4. Give every access port bridge the same root priority and rely on luck

Explanation

Correct Answer

C:

The shortcut at issue is to set the same physical IP manually on two independent gateways. A virtual gateway provides a stable first hop across routing-device failure. The corrective choice is: Configure a resilient virtual gateway mechanism with monitored upstream reachability.

Incorrect Answers

A:

The shortcut to assume a powered AP means client data tunnels always have a viable gateway is not the error in this case. The actual risk comes from set the same physical IP manually on two independent gateways.

B:

The shortcut to assume two configured gateways automatically replicate all TCP states is not the error in this case. The actual risk comes from set the same physical IP manually on two independent gateways.

D:

The shortcut to give every access port bridge the same root priority and rely on luck is not the error in this case. The actual risk comes from set the same physical IP manually on two independent gateways.

Question 133

At a multi-floor office campus, the campus engineering team reports that clients lose their default gateway when the active distribution switch fails. Which technical reasoning most specifically justifies the recommended solution?

  1. Parallel Ethernet paths require a loop-safe control-plane mechanism
  2. Redundant hardware does not guarantee every session survives a takeover
  3. Stack stability depends on correct member interconnects and coordinated state
  4. A virtual gateway provides a stable first hop across routing-device failure

Explanation

Correct Answer

D:

A virtual gateway provides a stable first hop across routing-device failure. This is the technical reason behind the proposed approach: “Configure a resilient virtual gateway mechanism with monitored upstream reachability”. The result should be checked by “Measure default-gateway reachability during a switch failover”.

Incorrect Answers

A:

The proposed alternative—parallel Ethernet paths require a loop-safe control-plane mechanism—does not address this requirement. A virtual gateway provides a stable first hop across routing-device failure.

B:

The proposed alternative—redundant hardware does not guarantee every session survives a takeover—does not address this requirement. A virtual gateway provides a stable first hop across routing-device failure.

C:

The proposed alternative—stack stability depends on correct member interconnects and coordinated state—does not address this requirement. A virtual gateway provides a stable first hop across routing-device failure.

Question 134

At a multi-floor office campus, the campus engineering team reports that clients lose their default gateway when the active distribution switch fails. Which test would most directly show that the requested outcome was achieved?

  1. Inspect ISL state and VSX consistency diagnostics on both peers
  2. Reproduce the event and inspect priority and active role history
  3. Examine VSF topology and restore the missing member safely
  4. Measure default-gateway reachability during a switch failover

Explanation

Correct Answer

D:

The outcome check is to measure default-gateway reachability during a switch failover. It measures whether the stated requirement was met. A virtual gateway provides a stable first hop across routing-device failure.

Incorrect Answers

A:

The suggested check—inspect ISL state and VSX consistency diagnostics on both peers—does not test the required result. Instead, measure default-gateway reachability during a switch failover.

B:

The suggested check—reproduce the event and inspect priority and active role history—does not test the required result. Instead, measure default-gateway reachability during a switch failover.

C:

The suggested check—examine VSF topology and restore the missing member safely—does not test the required result. Instead, measure default-gateway reachability during a switch failover.

Question 135

At a multi-floor office campus, the campus engineering team reports that clients lose their default gateway when the active distribution switch fails. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Verify the VSX ISL and its correct LAG members before altering downstream VLANs
  2. Measure default-gateway reachability during a switch failover
  3. Configure a resilient virtual gateway mechanism with monitored upstream reachability
  4. Fail the upstream path and record active gateway behavior
  5. Verify member identity, software compatibility and current approved group configuration

Explanation

Correct Answers

B:

The selected action is Measure default-gateway reachability during a switch failover. Its matching outcome check is to measure default-gateway reachability during a switch failover.

C:

The selected action is Configure a resilient virtual gateway mechanism with monitored upstream reachability. Its matching outcome check is to measure default-gateway reachability during a switch failover.

Incorrect Answers

A:

The proposed alternative—verify the VSX ISL and its correct LAG members before altering downstream VLANs—does not address this requirement. A virtual gateway provides a stable first hop across routing-device failure.

D:

The proposed alternative—fail the upstream path and record active gateway behavior—does not address this requirement. A virtual gateway provides a stable first hop across routing-device failure.

E:

The proposed alternative—verify member identity, software compatibility and current approved group configuration—does not address this requirement. A virtual gateway provides a stable first hop across routing-device failure.

Question 136

At a logistics and warehousing campus, the access-network team reports that a VSX active-gateway deployment sends inconsistent ARP replies from its peers. Which configuration or operating decision most directly addresses the issue?

  1. Configure a resilient virtual gateway mechanism with monitored upstream reachability
  2. Align the virtual gateway MAC/IP configuration and VLAN context on both peers
  3. Verify the VSX ISL and its correct LAG members before altering downstream VLANs
  4. Compare tracked objects, priorities and preemption policy on the redundant pair

Explanation

Correct Answer

B:

Align the virtual gateway MAC/IP configuration and VLAN context on both peers. Consistent shared gateway identity avoids client neighbor confusion. Confirm the result using this test: Inspect ARP records and first-hop connectivity after peer switchover.

Incorrect Answers

A:

The proposed alternative—configure a resilient virtual gateway mechanism with monitored upstream reachability—does not address the current failure. Instead, align the virtual gateway MAC/IP configuration and VLAN context on both peers.

C:

The proposed alternative—verify the VSX ISL and its correct LAG members before altering downstream VLANs—does not address the current failure. Instead, align the virtual gateway MAC/IP configuration and VLAN context on both peers.

D:

The proposed alternative—compare tracked objects, priorities and preemption policy on the redundant pair—does not address the current failure. Instead, align the virtual gateway MAC/IP configuration and VLAN context on both peers.

Question 137

At a logistics and warehousing campus, the access-network team reports that a VSX active-gateway deployment sends inconsistent ARP replies from its peers. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Connect both uplinks as independent unprotected access ports
  2. Erase all member configuration because one stack cable is disconnected
  3. Assume a working keepalive is a substitute for all ISL data transport
  4. Configure conflicting gateway MAC values for the same shared VLAN

Explanation

Correct Answer

D:

The shortcut at issue is to configure conflicting gateway MAC values for the same shared VLAN. The corrective choice is: Align the virtual gateway MAC/IP configuration and VLAN context on both peers.

Incorrect Answers

A:

The shortcut to connect both uplinks as independent unprotected access ports is not the error in this case. The actual risk comes from configure conflicting gateway MAC values for the same shared VLAN.

B:

The shortcut to erase all member configuration because one stack cable is disconnected is not the error in this case. The actual risk comes from configure conflicting gateway MAC values for the same shared VLAN.

C:

The shortcut to assume a working keepalive is a substitute for all ISL data transport is not the error in this case. The actual risk comes from configure conflicting gateway MAC values for the same shared VLAN.

Question 138

At a logistics and warehousing campus, the access-network team reports that a VSX active-gateway deployment sends inconsistent ARP replies from its peers. Which technical reasoning most specifically justifies the recommended solution?

  1. Redundant hardware does not guarantee every session survives a takeover
  2. Parallel Ethernet paths require a loop-safe control-plane mechanism
  3. Consistent shared gateway identity avoids client neighbor confusion
  4. Wireless control connectivity and user traffic forwarding can fail separately

Explanation

Correct Answer

C:

Consistent shared gateway identity avoids client neighbor confusion. This is the technical reason behind the proposed approach: “Align the virtual gateway MAC/IP configuration and VLAN context on both peers”. The result should be checked by “Inspect ARP records and first-hop connectivity after peer switchover”.

Incorrect Answers

A:

The proposed alternative—redundant hardware does not guarantee every session survives a takeover—does not address the current failure. Instead, align the virtual gateway MAC/IP configuration and VLAN context on both peers.

B:

The proposed alternative—parallel Ethernet paths require a loop-safe control-plane mechanism—does not address the current failure. Instead, align the virtual gateway MAC/IP configuration and VLAN context on both peers.

D:

The proposed alternative—wireless control connectivity and user traffic forwarding can fail separately—does not address the current failure. Instead, align the virtual gateway MAC/IP configuration and VLAN context on both peers.

Question 139

At a logistics and warehousing campus, the access-network team reports that a VSX active-gateway deployment sends inconsistent ARP replies from its peers. Which test would most directly show that the requested outcome was achieved?

  1. Force a planned gateway failover and inspect client continuity
  2. Inspect ARP records and first-hop connectivity after peer switchover
  3. Fail the upstream path and record active gateway behavior
  4. Simulate an approved link outage and inspect active-member elections

Explanation

Correct Answer

B:

The outcome check is to inspect ARP records and first-hop connectivity after peer switchover. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—force a planned gateway failover and inspect client continuity—does not test the required result. Instead, inspect ARP records and first-hop connectivity after peer switchover.

C:

The suggested check—fail the upstream path and record active gateway behavior—does not test the required result. Instead, inspect ARP records and first-hop connectivity after peer switchover.

D:

The suggested check—simulate an approved link outage and inspect active-member elections—does not test the required result. Instead, inspect ARP records and first-hop connectivity after peer switchover.

Question 140

At a logistics and warehousing campus, the access-network team reports that a VSX active-gateway deployment sends inconsistent ARP replies from its peers. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Inspect ARP records and first-hop connectivity after peer switchover
  2. Test a controlled peer failure and inspect LACP and forwarding
  3. Assign and verify primary and secondary spanning-tree root priorities for intended VLANs
  4. Monitor appropriate upstream health and couple it to gateway failover policy
  5. Align the virtual gateway MAC/IP configuration and VLAN context on both peers

Explanation

Correct Answers

A:

The selected action is Inspect ARP records and first-hop connectivity after peer switchover. Its matching outcome check is to inspect ARP records and first-hop connectivity after peer switchover.

E:

The selected action is Align the virtual gateway MAC/IP configuration and VLAN context on both peers. Its matching outcome check is to inspect ARP records and first-hop connectivity after peer switchover.

Incorrect Answers

B:

The proposed alternative—test a controlled peer failure and inspect LACP and forwarding—does not address the current failure. Instead, align the virtual gateway MAC/IP configuration and VLAN context on both peers.

C:

The proposed alternative—assign and verify primary and secondary spanning-tree root priorities for intended VLANs—does not address the current failure. Instead, align the virtual gateway MAC/IP configuration and VLAN context on both peers.

D:

The proposed alternative—monitor appropriate upstream health and couple it to gateway failover policy—does not address the current failure. Instead, align the virtual gateway MAC/IP configuration and VLAN context on both peers.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests