HP HPE7-A01 Dumps
HP HPE7-A01 Practice Test 88
Question 870
At a regional retail distribution center, the infrastructure team reports that legacy low-speed WLAN beacons consume excessive airtime in a well-covered auditorium. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Measure association success and management airtime before and after. Its matching outcome check is to measure association success and management airtime before and after.
The selected action is Assess higher supported minimum rates without excluding required client classes. Its matching outcome check is to measure association success and management airtime before and after.
Incorrect Answers
The proposed alternative—repeat fixed application tests and compare distribution of metrics—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.
The proposed alternative—measure roaming and reauthentication timing, then apply compatible fast-roam features—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.
The proposed alternative—evaluate airtime-fairness policy and minimum supported rates for client populations—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.
Question 871
At an international convention venue, the wireless support team reports that APs transmit at maximum power and clients stay associated far outside intended cells. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Rebalance transmit power and channel assignment using survey measurements. Oversized cells increase co-channel interference and poor roaming decisions. Confirm the result using this test: Inspect cell boundaries, roaming stability and channel reuse.
Incorrect Answers
The proposed alternative—apply supported multicast optimization and limit unnecessary broadcast propagation—does not address the current failure. Instead, rebalance transmit power and channel assignment using survey measurements.
The proposed alternative—review egress queue assignment, shaping and traffic-class contention—does not address the current failure. Instead, rebalance transmit power and channel assignment using survey measurements.
The proposed alternative—use capacity-driven AP placement and controlled radio reuse for balanced load—does not address the current failure. Instead, rebalance transmit power and channel assignment using survey measurements.
Question 872
At an international convention venue, the wireless support team reports that APs transmit at maximum power and clients stay associated far outside intended cells. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to raise every AP to maximum power as the universal capacity fix. The corrective choice is: Rebalance transmit power and channel assignment using survey measurements.
Incorrect Answers
The shortcut to trust every endpoint's DSCP value regardless of application identity is not the error in this case. The actual risk comes from raise every AP to maximum power as the universal capacity fix.
The shortcut to disable all multicast permanently even for critical service discovery is not the error in this case. The actual risk comes from raise every AP to maximum power as the universal capacity fix.
The shortcut to equalize packet counts without measuring how long each client occupies the channel is not the error in this case. The actual risk comes from raise every AP to maximum power as the universal capacity fix.
Question 873
At an international convention venue, the wireless support team reports that APs transmit at maximum power and clients stay associated far outside intended cells. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
Oversized cells increase co-channel interference and poor roaming decisions. This is the technical reason behind the proposed approach: “Rebalance transmit power and channel assignment using survey measurements”. The result should be checked by “Inspect cell boundaries, roaming stability and channel reuse”.
Incorrect Answers
The proposed alternative—airtime fairness addresses the disproportionate occupancy of slow transmissions—does not address the current failure. Instead, rebalance transmit power and channel assignment using survey measurements.
The proposed alternative—time spent in reassociation and authentication affects real-time application continuity—does not address the current failure. Instead, rebalance transmit power and channel assignment using survey measurements.
The proposed alternative—priority scheduling can protect latency-sensitive traffic within configured limits—does not address the current failure. Instead, rebalance transmit power and channel assignment using survey measurements.
Question 874
At an international convention venue, the wireless support team reports that APs transmit at maximum power and clients stay associated far outside intended cells. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to inspect cell boundaries, roaming stability and channel reuse. It measures whether the stated requirement was met.
Incorrect Answers
The suggested check—generate controlled congestion and measure voice jitter and queue drops—does not test the required result. Instead, inspect cell boundaries, roaming stability and channel reuse.
The suggested check—compare total site throughput and co-channel busy time—does not test the required result. Instead, inspect cell boundaries, roaming stability and channel reuse.
The suggested check—measure queue depth, drops and application latency under sustained load—does not test the required result. Instead, inspect cell boundaries, roaming stability and channel reuse.
Question 875
At an international convention venue, the wireless support team reports that APs transmit at maximum power and clients stay associated far outside intended cells. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Rebalance transmit power and channel assignment using survey measurements. Its matching outcome check is to inspect cell boundaries, roaming stability and channel reuse.
The selected action is Inspect cell boundaries, roaming stability and channel reuse. Its matching outcome check is to inspect cell boundaries, roaming stability and channel reuse.
Incorrect Answers
The proposed alternative—shape egress traffic below the actual service rate with monitored queues—does not address the current failure. Instead, rebalance transmit power and channel assignment using survey measurements.
The proposed alternative—define measurable latency, jitter, loss and throughput criteria before adjustment—does not address the current failure. Instead, rebalance transmit power and channel assignment using survey measurements.
The proposed alternative—capture WMM category and voice delay during load—does not address the current failure. Instead, rebalance transmit power and channel assignment using survey measurements.
Question 876
At an airport administration network, the wireless engineering team reports that warehouse voice handsets experience short audio gaps while moving between AP coverage areas. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Measure roaming and reauthentication timing, then apply compatible fast-roam features. Time spent in reassociation and authentication affects real-time application continuity. Confirm the result using this test: Record roam duration and packet loss across repeated walk tests.
Incorrect Answers
The proposed alternative—use capacity-driven AP placement and controlled radio reuse for balanced load—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
The proposed alternative—test 20 or 40 MHz channel widths to improve reuse where appropriate—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
The proposed alternative—define an approved QoS trust boundary and classify or remark traffic at the campus edge—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
Question 877
At an airport administration network, the wireless engineering team reports that warehouse voice handsets experience short audio gaps while moving between AP coverage areas. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to replace all wired switch QoS policies without observing wireless handoff delay. The corrective choice is: Measure roaming and reauthentication timing, then apply compatible fast-roam features.
Incorrect Answers
The shortcut to disable all multicast permanently even for critical service discovery is not the error in this case. The actual risk comes from replace all wired switch QoS policies without observing wireless handoff delay.
The shortcut to choose maximum width on every neighboring AP solely for headline peak speed is not the error in this case. The actual risk comes from replace all wired switch QoS policies without observing wireless handoff delay.
The shortcut to increase the switch interface speed setting to override provider bandwidth contracts is not the error in this case. The actual risk comes from replace all wired switch QoS policies without observing wireless handoff delay.
Question 878
At an airport administration network, the wireless engineering team reports that warehouse voice handsets experience short audio gaps while moving between AP coverage areas. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
Time spent in reassociation and authentication affects real-time application continuity. This is the technical reason behind the proposed approach: “Measure roaming and reauthentication timing, then apply compatible fast-roam features”. The result should be checked by “Record roam duration and packet loss across repeated walk tests”.
Incorrect Answers
The proposed alternative—queue drops identify a capacity or scheduling bottleneck at the output stage—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
The proposed alternative—over-the-air broadcast and multicast can consume disproportionate channel airtime—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
The proposed alternative—wireless QoS relies on correctly mapped EDCA categories at the radio edge—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
Question 879
At an airport administration network, the wireless engineering team reports that warehouse voice handsets experience short audio gaps while moving between AP coverage areas. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to record roam duration and packet loss across repeated walk tests. It measures whether the stated requirement was met.
Incorrect Answers
The proposed alternative—inspect cell boundaries, roaming stability and channel reuse—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
The proposed alternative—correlate per-queue drops with egress load and application retries—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
The proposed alternative—generate controlled congestion and measure voice jitter and queue drops—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
Question 880
At an airport administration network, the wireless engineering team reports that warehouse voice handsets experience short audio gaps while moving between AP coverage areas. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Measure roaming and reauthentication timing, then apply compatible fast-roam features.
The selected action is Record roam duration and packet loss across repeated walk tests.
Incorrect Answers
The proposed alternative—evaluate airtime-fairness policy and minimum supported rates for client populations—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
The proposed alternative—apply a bounded voice priority policy with appropriate queue scheduling—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
The proposed alternative—repeat fixed application tests and compare distribution of metrics—does not address the current failure. Instead, measure roaming and reauthentication timing, then apply compatible fast-roam features.
HPE Network Campus Access Professional (HPE7-A01) Practice Tests
- HP HPE7-A01 Practice Test 86 - 10 Questions (Last Reviewed 21-Oct-2026)
- HP HPE7-A01 Practice Test 87 - 10 Questions (Last Reviewed 20-Oct-2026)
- HP HPE7-A01 Practice Test 88 - 10 Questions (Last Reviewed 19-Oct-2026)
- HP HPE7-A01 Practice Test 89 - 10 Questions (Last Reviewed 18-Oct-2026)
- HP HPE7-A01 Practice Test 90 - 10 Questions (Last Reviewed 17-Oct-2026)