Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 87

Question 860

At a city-government services campus, the support engineering team reports that several slow wireless clients monopolize airtime while fast clients receive little capacity. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Define measurable latency, jitter, loss and throughput criteria before adjustment
  2. Evaluate airtime-fairness policy and minimum supported rates for client populations
  3. Assess higher supported minimum rates without excluding required client classes
  4. Capture WMM category and voice delay during load
  5. Compare per-client airtime and application performance after tuning

Explanation

Correct Answers

B:

The selected action is Evaluate airtime-fairness policy and minimum supported rates for client populations. Its matching outcome check is to compare per-client airtime and application performance after tuning.

E:

The selected action is Compare per-client airtime and application performance after tuning. Its matching outcome check is to compare per-client airtime and application performance after tuning.

Incorrect Answers

A:

The proposed alternative—define measurable latency, jitter, loss and throughput criteria before adjustment—does not address the current failure. Instead, evaluate airtime-fairness policy and minimum supported rates for client populations.

C:

The proposed alternative—assess higher supported minimum rates without excluding required client classes—does not address the current failure. Instead, evaluate airtime-fairness policy and minimum supported rates for client populations.

D:

The proposed alternative—capture WMM category and voice delay during load—does not address the current failure. Instead, evaluate airtime-fairness policy and minimum supported rates for client populations.

Question 861

At a university residence hall, the technical team reports that 80 MHz channels overlap heavily in a dense campus and produce high retry counts. Which configuration or operating decision most directly addresses the issue?

  1. Apply a bounded voice priority policy with appropriate queue scheduling
  2. Shape egress traffic below the actual service rate with monitored queues
  3. Review egress queue assignment, shaping and traffic-class contention
  4. Test 20 or 40 MHz channel widths to improve reuse where appropriate

Explanation

Correct Answer

D:

Test 20 or 40 MHz channel widths to improve reuse where appropriate. Narrow channels can reduce overlap and increase aggregate cell capacity. Confirm the result using this test: Compare total site throughput and co-channel busy time.

Incorrect Answers

A:

The proposed alternative—apply a bounded voice priority policy with appropriate queue scheduling—does not address this requirement. Narrow channels can reduce overlap and increase aggregate cell capacity.

B:

The proposed alternative—shape egress traffic below the actual service rate with monitored queues—does not address this requirement. Narrow channels can reduce overlap and increase aggregate cell capacity.

C:

The proposed alternative—review egress queue assignment, shaping and traffic-class contention—does not address this requirement. Narrow channels can reduce overlap and increase aggregate cell capacity.

Question 862

At a university residence hall, the technical team reports that 80 MHz channels overlap heavily in a dense campus and produce high retry counts. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume wired QoS markings automatically imply proper wireless queueing
  2. Trust every endpoint's DSCP value regardless of application identity
  3. Choose maximum width on every neighboring AP solely for headline peak speed
  4. Increase interface descriptions to reserve bandwidth for a traffic class

Explanation

Correct Answer

C:

The shortcut at issue is to choose maximum width on every neighboring AP solely for headline peak speed. Narrow channels can reduce overlap and increase aggregate cell capacity. The corrective choice is: Test 20 or 40 MHz channel widths to improve reuse where appropriate.

Incorrect Answers

A:

The shortcut to assume wired QoS markings automatically imply proper wireless queueing is not the error in this case. The actual risk comes from choose maximum width on every neighboring AP solely for headline peak speed.

B:

The shortcut to trust every endpoint's DSCP value regardless of application identity is not the error in this case. The actual risk comes from choose maximum width on every neighboring AP solely for headline peak speed.

D:

The shortcut to increase interface descriptions to reserve bandwidth for a traffic class is not the error in this case. The actual risk comes from choose maximum width on every neighboring AP solely for headline peak speed.

Question 863

At a university residence hall, the technical team reports that 80 MHz channels overlap heavily in a dense campus and produce high retry counts. Which technical reasoning most specifically justifies the recommended solution?

  1. Narrow channels can reduce overlap and increase aggregate cell capacity
  2. Time spent in reassociation and authentication affects real-time application continuity
  3. Ingress trust policy prevents arbitrary endpoint markings from taking all priority
  4. Oversized cells increase co-channel interference and poor roaming decisions

Explanation

Correct Answer

A:

Narrow channels can reduce overlap and increase aggregate cell capacity. This is the technical reason behind the proposed approach: “Test 20 or 40 MHz channel widths to improve reuse where appropriate”. The result should be checked by “Compare total site throughput and co-channel busy time”.

Incorrect Answers

B:

The proposed alternative—time spent in reassociation and authentication affects real-time application continuity—does not address this requirement. Narrow channels can reduce overlap and increase aggregate cell capacity.

C:

The proposed alternative—ingress trust policy prevents arbitrary endpoint markings from taking all priority—does not address this requirement. Narrow channels can reduce overlap and increase aggregate cell capacity.

D:

The proposed alternative—oversized cells increase co-channel interference and poor roaming decisions—does not address this requirement. Narrow channels can reduce overlap and increase aggregate cell capacity.

Question 864

At a university residence hall, the technical team reports that 80 MHz channels overlap heavily in a dense campus and produce high retry counts. Which test would most directly show that the requested outcome was achieved?

  1. Repeat fixed application tests and compare distribution of metrics
  2. Compare total site throughput and co-channel busy time
  3. Record roam duration and packet loss across repeated walk tests
  4. Measure per-radio client count, airtime and aggregate throughput

Explanation

Correct Answer

B:

The outcome check is to compare total site throughput and co-channel busy time. It measures whether the stated requirement was met. Narrow channels can reduce overlap and increase aggregate cell capacity.

Incorrect Answers

A:

The suggested check—repeat fixed application tests and compare distribution of metrics—does not test the required result. Instead, compare total site throughput and co-channel busy time.

C:

The suggested check—record roam duration and packet loss across repeated walk tests—does not test the required result. Instead, compare total site throughput and co-channel busy time.

D:

The suggested check—measure per-radio client count, airtime and aggregate throughput—does not test the required result. Instead, compare total site throughput and co-channel busy time.

Question 865

At a university residence hall, the technical team reports that 80 MHz channels overlap heavily in a dense campus and produce high retry counts. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Use capacity-driven AP placement and controlled radio reuse for balanced load
  2. Test 20 or 40 MHz channel widths to improve reuse where appropriate
  3. Compare per-client airtime and application performance after tuning
  4. Compare total site throughput and co-channel busy time
  5. Assess higher supported minimum rates without excluding required client classes

Explanation

Correct Answers

B:

The selected action is Test 20 or 40 MHz channel widths to improve reuse where appropriate. Its matching outcome check is to compare total site throughput and co-channel busy time.

D:

The selected action is Compare total site throughput and co-channel busy time. Its matching outcome check is to compare total site throughput and co-channel busy time.

Incorrect Answers

A:

The proposed alternative—use capacity-driven AP placement and controlled radio reuse for balanced load—does not address this requirement. Narrow channels can reduce overlap and increase aggregate cell capacity.

C:

The proposed alternative—compare per-client airtime and application performance after tuning—does not address this requirement. Narrow channels can reduce overlap and increase aggregate cell capacity.

E:

The proposed alternative—assess higher supported minimum rates without excluding required client classes—does not address this requirement. Narrow channels can reduce overlap and increase aggregate cell capacity.

Question 866

At a regional retail distribution center, the infrastructure team reports that legacy low-speed WLAN beacons consume excessive airtime in a well-covered auditorium. Which configuration or operating decision most directly addresses the issue?

  1. Define an approved QoS trust boundary and classify or remark traffic at the campus edge
  2. Review WMM access-category mapping and application classification
  3. Assess higher supported minimum rates without excluding required client classes
  4. Shape egress traffic below the actual service rate with monitored queues

Explanation

Correct Answer

C:

Assess higher supported minimum rates without excluding required client classes. Basic rates determine management overhead and effective cell reach. Confirm the result using this test: Measure association success and management airtime before and after.

Incorrect Answers

A:

The proposed alternative—define an approved QoS trust boundary and classify or remark traffic at the campus edge—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.

B:

The proposed alternative—review WMM access-category mapping and application classification—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.

D:

The proposed alternative—shape egress traffic below the actual service rate with monitored queues—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.

Question 867

At a regional retail distribution center, the infrastructure team reports that legacy low-speed WLAN beacons consume excessive airtime in a well-covered auditorium. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume wired QoS markings automatically imply proper wireless queueing
  2. Give all file transfers the same strict priority as interactive voice
  3. Extend one AP's coverage instead of adding channels or capacity
  4. Raise the minimum rate above every supported legacy device with no compatibility check

Explanation

Correct Answer

D:

The shortcut at issue is to raise the minimum rate above every supported legacy device with no compatibility check. Assess higher supported minimum rates without excluding required client classes. The corrective choice is: Assess higher supported minimum rates without excluding required client classes.

Incorrect Answers

A:

The shortcut to assume wired QoS markings automatically imply proper wireless queueing is not the error in this case. The actual risk comes from raise the minimum rate above every supported legacy device with no compatibility check.

B:

The shortcut to give all file transfers the same strict priority as interactive voice is not the error in this case. The actual risk comes from raise the minimum rate above every supported legacy device with no compatibility check.

C:

The shortcut to extend one AP's coverage instead of adding channels or capacity is not the error in this case. The actual risk comes from raise the minimum rate above every supported legacy device with no compatibility check.

Question 868

At a regional retail distribution center, the infrastructure team reports that legacy low-speed WLAN beacons consume excessive airtime in a well-covered auditorium. Which technical reasoning most specifically justifies the recommended solution?

  1. Basic rates determine management overhead and effective cell reach
  2. Physical cell design limits contention more effectively than high transmit power
  3. Narrow channels can reduce overlap and increase aggregate cell capacity
  4. Oversized cells increase co-channel interference and poor roaming decisions

Explanation

Correct Answer

A:

Basic rates determine management overhead and effective cell reach. This is the technical reason behind the proposed approach: “Assess higher supported minimum rates without excluding required client classes”. The result should be checked by “Measure association success and management airtime before and after”.

Incorrect Answers

B:

The proposed alternative—physical cell design limits contention more effectively than high transmit power—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.

C:

The proposed alternative—narrow channels can reduce overlap and increase aggregate cell capacity—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.

D:

The proposed alternative—oversized cells increase co-channel interference and poor roaming decisions—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.

Question 869

At a regional retail distribution center, the infrastructure team reports that legacy low-speed WLAN beacons consume excessive airtime in a well-covered auditorium. Which test would most directly show that the requested outcome was achieved?

  1. Compare multicast airtime and required service availability
  2. Compare total site throughput and co-channel busy time
  3. Measure association success and management airtime before and after
  4. Record roam duration and packet loss across repeated walk tests

Explanation

Correct Answer

C:

The outcome check is to measure association success and management airtime before and after. It measures whether the stated requirement was met. Assess higher supported minimum rates without excluding required client classes.

Incorrect Answers

A:

The suggested check—compare multicast airtime and required service availability—does not test the required result. Instead, measure association success and management airtime before and after.

B:

The suggested check—compare total site throughput and co-channel busy time—does not test the required result. Instead, measure association success and management airtime before and after.

D:

The suggested check—record roam duration and packet loss across repeated walk tests—does not test the required result. Instead, measure association success and management airtime before and after.

Question 870

At a regional retail distribution center, the infrastructure team reports that legacy low-speed WLAN beacons consume excessive airtime in a well-covered auditorium. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Measure association success and management airtime before and after
  2. Assess higher supported minimum rates without excluding required client classes
  3. Repeat fixed application tests and compare distribution of metrics
  4. Measure roaming and reauthentication timing, then apply compatible fast-roam features
  5. Evaluate airtime-fairness policy and minimum supported rates for client populations

Explanation

Correct Answers

A:

The selected action is Measure association success and management airtime before and after. Its matching outcome check is to measure association success and management airtime before and after.

B:

The selected action is Assess higher supported minimum rates without excluding required client classes. Its matching outcome check is to measure association success and management airtime before and after.

Incorrect Answers

C:

The proposed alternative—repeat fixed application tests and compare distribution of metrics—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.

D:

The proposed alternative—measure roaming and reauthentication timing, then apply compatible fast-roam features—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.

E:

The proposed alternative—evaluate airtime-fairness policy and minimum supported rates for client populations—does not address this requirement. Assess higher supported minimum rates without excluding required client classes.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests