Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 7

Question 60

At a university engineering campus, the engineering team reports that a technician moves an AP cable and the documented neighbor port no longer matches reality. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Use LLDP neighbor identities and physical port observations to reconcile cabling
  2. Compare allowed VLANs and management connectivity at both ends
  3. Compare LLDP system IDs and interface descriptions at both peers
  4. Check facility power, PoE load, environmental limits and hardware logs
  5. Inspect scope utilization, exclusions and lease behavior before expanding capacity

Explanation

Correct Answers

A:

The selected action is Use LLDP neighbor identities and physical port observations to reconcile cabling. Its matching outcome check is to compare LLDP system IDs and interface descriptions at both peers.

C:

The selected action is Compare LLDP system IDs and interface descriptions at both peers. Its matching outcome check is to compare LLDP system IDs and interface descriptions at both peers.

Incorrect Answers

B:

The proposed alternative—compare allowed VLANs and management connectivity at both ends—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

D:

The proposed alternative—check facility power, PoE load, environmental limits and hardware logs—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

E:

The proposed alternative—inspect scope utilization, exclusions and lease behavior before expanding capacity—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

Question 61

At a city-government services campus, the support engineering team reports that a modern switch uplink negotiates 100 Mbps unexpectedly despite gigabit-capable endpoints. Which configuration or operating decision most directly addresses the issue?

  1. Verify optic type, wavelength, fiber distance and supported port mode on both ends
  2. Inspect negotiation settings, transceiver and cable pairs before forcing speeds
  3. Test DNS lookup and resolver reachability before changing layer-3 routes
  4. Inspect scope utilization, exclusions and lease behavior before expanding capacity

Explanation

Correct Answer

B:

Inspect negotiation settings, transceiver and cable pairs before forcing speeds. Negotiation and physical media faults can cap Ethernet link rate. Confirm the result using this test: Check negotiated speed, duplex and physical error counters.

Incorrect Answers

A:

The proposed alternative—verify optic type, wavelength, fiber distance and supported port mode on both ends—does not address this requirement. Negotiation and physical media faults can cap Ethernet link rate.

C:

The proposed alternative—test DNS lookup and resolver reachability before changing layer-3 routes—does not address this requirement. Negotiation and physical media faults can cap Ethernet link rate.

D:

The proposed alternative—inspect scope utilization, exclusions and lease behavior before expanding capacity—does not address this requirement. Negotiation and physical media faults can cap Ethernet link rate.

Question 62

At a city-government services campus, the support engineering team reports that a modern switch uplink negotiates 100 Mbps unexpectedly despite gigabit-capable endpoints. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Treat all unexpected reboots as routing-protocol convergence problems
  2. Hard-code the headquarters subnet in every generated site configuration
  3. Force maximum speed on one side without checking the remote interface
  4. Assume matching connector shape implies compatible wavelengths

Explanation

Correct Answer

C:

The shortcut at issue is to force maximum speed on one side without checking the remote interface. Negotiation and physical media faults can cap Ethernet link rate. The corrective choice is: Inspect negotiation settings, transceiver and cable pairs before forcing speeds.

Incorrect Answers

A:

The shortcut to treat all unexpected reboots as routing-protocol convergence problems is not the error in this case. The actual risk comes from force maximum speed on one side without checking the remote interface.

B:

The shortcut to hard-code the headquarters subnet in every generated site configuration is not the error in this case. The actual risk comes from force maximum speed on one side without checking the remote interface.

D:

The shortcut to assume matching connector shape implies compatible wavelengths is not the error in this case. The actual risk comes from force maximum speed on one side without checking the remote interface.

Question 63

At a city-government services campus, the support engineering team reports that a modern switch uplink negotiates 100 Mbps unexpectedly despite gigabit-capable endpoints. Which technical reasoning most specifically justifies the recommended solution?

  1. Device identity and site assignment must be correct before central templates can be trusted
  2. Negotiation and physical media faults can cap Ethernet link rate
  3. Operational readiness includes rack power and thermal conditions as well as configuration
  4. Physical carrier does not guarantee the intended VLAN is transported

Explanation

Correct Answer

B:

Negotiation and physical media faults can cap Ethernet link rate. This is the technical reason behind the proposed approach: “Inspect negotiation settings, transceiver and cable pairs before forcing speeds”. The result should be checked by “Check negotiated speed, duplex and physical error counters”.

Incorrect Answers

A:

The proposed alternative—device identity and site assignment must be correct before central templates can be trusted—does not address this requirement. Negotiation and physical media faults can cap Ethernet link rate.

C:

The proposed alternative—operational readiness includes rack power and thermal conditions as well as configuration—does not address this requirement. Negotiation and physical media faults can cap Ethernet link rate.

D:

The proposed alternative—physical carrier does not guarantee the intended VLAN is transported—does not address this requirement. Negotiation and physical media faults can cap Ethernet link rate.

Question 64

At a city-government services campus, the support engineering team reports that a modern switch uplink negotiates 100 Mbps unexpectedly despite gigabit-capable endpoints. Which test would most directly show that the requested outcome was achieved?

  1. Generate a targeted configuration diff and confirm service after remediation
  2. Compare allowed VLANs and management connectivity at both ends
  3. Compare LLDP system IDs and interface descriptions at both peers
  4. Check negotiated speed, duplex and physical error counters

Explanation

Correct Answer

D:

The outcome check is to check negotiated speed, duplex and physical error counters. It measures whether the stated requirement was met. Negotiation and physical media faults can cap Ethernet link rate.

Incorrect Answers

A:

The suggested check—generate a targeted configuration diff and confirm service after remediation—does not test the required result. Instead, check negotiated speed, duplex and physical error counters.

B:

The suggested check—compare allowed VLANs and management connectivity at both ends—does not test the required result. Instead, check negotiated speed, duplex and physical error counters.

C:

The suggested check—compare LLDP system IDs and interface descriptions at both peers—does not test the required result. Instead, check negotiated speed, duplex and physical error counters.

Question 65

At a city-government services campus, the support engineering team reports that a modern switch uplink negotiates 100 Mbps unexpectedly despite gigabit-capable endpoints. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Plan documented VLANs, SSID role mapping and routed policy boundaries
  2. Check negotiated speed, duplex and physical error counters
  3. Trace management-originated packets and the selected next hop
  4. Compare running configuration with the canonical template and review the authorized change
  5. Inspect negotiation settings, transceiver and cable pairs before forcing speeds

Explanation

Correct Answers

B:

The selected action is Check negotiated speed, duplex and physical error counters. Its matching outcome check is to check negotiated speed, duplex and physical error counters.

E:

The selected action is Inspect negotiation settings, transceiver and cable pairs before forcing speeds. Its matching outcome check is to check negotiated speed, duplex and physical error counters.

Incorrect Answers

A:

The proposed alternative—plan documented VLANs, SSID role mapping and routed policy boundaries—does not address this requirement. Negotiation and physical media faults can cap Ethernet link rate.

C:

The proposed alternative—trace management-originated packets and the selected next hop—does not address this requirement. Negotiation and physical media faults can cap Ethernet link rate.

D:

The proposed alternative—compare running configuration with the canonical template and review the authorized change—does not address this requirement. Negotiation and physical media faults can cap Ethernet link rate.

Question 66

At a university residence hall, the technical team reports that a new building needs separate voice, employee and visitor access without new physical uplinks. Which configuration or operating decision most directly addresses the issue?

  1. Plan documented VLANs, SSID role mapping and routed policy boundaries
  2. Separate common configuration from validated per-site addresses and interfaces
  3. Verify optic type, wavelength, fiber distance and supported port mode on both ends
  4. Use LLDP neighbor identities and physical port observations to reconcile cabling

Explanation

Correct Answer

A:

Plan documented VLANs, SSID role mapping and routed policy boundaries. Logical segmentation can share infrastructure while keeping access policy distinct. Confirm the result using this test: Test one host in each segment and trace allowed and denied paths.

Incorrect Answers

B:

The proposed alternative—separate common configuration from validated per-site addresses and interfaces—does not address this requirement. Logical segmentation can share infrastructure while keeping access policy distinct.

C:

The proposed alternative—verify optic type, wavelength, fiber distance and supported port mode on both ends—does not address this requirement. Logical segmentation can share infrastructure while keeping access policy distinct.

D:

The proposed alternative—use LLDP neighbor identities and physical port observations to reconcile cabling—does not address this requirement. Logical segmentation can share infrastructure while keeping access policy distinct.

Question 67

At a university residence hall, the technical team reports that a new building needs separate voice, employee and visitor access without new physical uplinks. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Treat all unexpected reboots as routing-protocol convergence problems
  2. Assume a MAC address table always identifies the directly attached AP port
  3. Rename the switch and assume that corrects its cloud ownership
  4. Use one flat untagged VLAN and depend only on device names for separation

Explanation

Correct Answer

D:

The shortcut at issue is to use one flat untagged VLAN and depend only on device names for separation. Logical segmentation can share infrastructure while keeping access policy distinct. The corrective choice is: Plan documented VLANs, SSID role mapping and routed policy boundaries.

Incorrect Answers

A:

The shortcut to treat all unexpected reboots as routing-protocol convergence problems is not the error in this case. The actual risk comes from use one flat untagged VLAN and depend only on device names for separation.

B:

The shortcut to assume a MAC address table always identifies the directly attached AP port is not the error in this case. The actual risk comes from use one flat untagged VLAN and depend only on device names for separation.

C:

The shortcut to rename the switch and assume that corrects its cloud ownership is not the error in this case. The actual risk comes from use one flat untagged VLAN and depend only on device names for separation.

Question 68

At a university residence hall, the technical team reports that a new building needs separate voice, employee and visitor access without new physical uplinks. Which technical reasoning most specifically justifies the recommended solution?

  1. Device identity and site assignment must be correct before central templates can be trusted
  2. Logical segmentation can share infrastructure while keeping access policy distinct
  3. Negotiation and physical media faults can cap Ethernet link rate
  4. Configuration drift must be reconciled against an actual approved revision

Explanation

Correct Answer

B:

Logical segmentation can share infrastructure while keeping access policy distinct. This is the technical reason behind the proposed approach: “Plan documented VLANs, SSID role mapping and routed policy boundaries”. The result should be checked by “Test one host in each segment and trace allowed and denied paths”.

Incorrect Answers

A:

The proposed alternative—device identity and site assignment must be correct before central templates can be trusted—does not address this requirement. Logical segmentation can share infrastructure while keeping access policy distinct.

C:

The proposed alternative—negotiation and physical media faults can cap Ethernet link rate—does not address this requirement. Logical segmentation can share infrastructure while keeping access policy distinct.

D:

The proposed alternative—configuration drift must be reconciled against an actual approved revision—does not address this requirement. Logical segmentation can share infrastructure while keeping access policy distinct.

Question 69

At a university residence hall, the technical team reports that a new building needs separate voice, employee and visitor access without new physical uplinks. Which test would most directly show that the requested outcome was achieved?

  1. Compare pilot health and signed deployment receipts
  2. Test one host in each segment and trace allowed and denied paths
  3. Compare name resolution and direct IP connectivity from the client
  4. Check negotiated speed, duplex and physical error counters

Explanation

Correct Answer

B:

The outcome check is to test one host in each segment and trace allowed and denied paths. It measures whether the stated requirement was met. Logical segmentation can share infrastructure while keeping access policy distinct.

Incorrect Answers

A:

The suggested check—compare pilot health and signed deployment receipts—does not test the required result. Instead, test one host in each segment and trace allowed and denied paths.

C:

The suggested check—compare name resolution and direct IP connectivity from the client—does not test the required result. Instead, test one host in each segment and trace allowed and denied paths.

D:

The suggested check—check negotiated speed, duplex and physical error counters—does not test the required result. Instead, test one host in each segment and trace allowed and denied paths.

Question 70

At a university residence hall, the technical team reports that a new building needs separate voice, employee and visitor access without new physical uplinks. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Inspect scope utilization, exclusions and lease behavior before expanding capacity
  2. Test DNS lookup and resolver reachability before changing layer-3 routes
  3. Test one host in each segment and trace allowed and denied paths
  4. Plan documented VLANs, SSID role mapping and routed policy boundaries
  5. Compare allowed VLANs and management connectivity at both ends

Explanation

Correct Answers

C:

The selected action is Test one host in each segment and trace allowed and denied paths. Its matching outcome check is to test one host in each segment and trace allowed and denied paths.

D:

The selected action is Plan documented VLANs, SSID role mapping and routed policy boundaries. Its matching outcome check is to test one host in each segment and trace allowed and denied paths.

Incorrect Answers

A:

The proposed alternative—inspect scope utilization, exclusions and lease behavior before expanding capacity—does not address this requirement. Logical segmentation can share infrastructure while keeping access policy distinct.

B:

The proposed alternative—test DNS lookup and resolver reachability before changing layer-3 routes—does not address this requirement. Logical segmentation can share infrastructure while keeping access policy distinct.

E:

The proposed alternative—compare allowed VLANs and management connectivity at both ends—does not address this requirement. Logical segmentation can share infrastructure while keeping access policy distinct.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests