Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 6

Question 50

At a regional hospital network, the network team reports that new APs receive DHCP leases but fail to find their intended management service. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Examine DHCP options, resolved destinations and discovery logs
  2. Inspect negotiation settings, transceiver and cable pairs before forcing speeds
  3. Review DHCP discover-offer exchanges and free lease counts
  4. Validate DNS resolution and discovery or provisioning parameters after DHCP
  5. Verify optic type, wavelength, fiber distance and supported port mode on both ends

Explanation

Correct Answers

A:

The selected action is Examine DHCP options, resolved destinations and discovery logs.

D:

The selected action is Validate DNS resolution and discovery or provisioning parameters after DHCP.

Incorrect Answers

B:

The proposed alternative—inspect negotiation settings, transceiver and cable pairs before forcing speeds—does not address the current failure. Instead, validate DNS resolution and discovery or provisioning parameters after DHCP.

C:

The proposed alternative—review DHCP discover-offer exchanges and free lease counts—does not address the current failure. Instead, validate DNS resolution and discovery or provisioning parameters after DHCP.

E:

The proposed alternative—verify optic type, wavelength, fiber distance and supported port mode on both ends—does not address the current failure. Instead, validate DNS resolution and discovery or provisioning parameters after DHCP.

Question 51

At an industrial manufacturing site, the network engineering team reports that a newly installed access switch has link lights but is unreachable from the core. Which configuration or operating decision most directly addresses the issue?

  1. Validate DNS resolution and discovery or provisioning parameters after DHCP
  2. Check trunk permissions, native VLAN and uplink routing or management VLAN
  3. Use LLDP neighbor identities and physical port observations to reconcile cabling
  4. Inspect negotiation settings, transceiver and cable pairs before forcing speeds

Explanation

Correct Answer

B:

Check trunk permissions, native VLAN and uplink routing or management VLAN. Physical carrier does not guarantee the intended VLAN is transported. Confirm the result using this test: Compare allowed VLANs and management connectivity at both ends.

Incorrect Answers

A:

The proposed alternative—validate DNS resolution and discovery or provisioning parameters after DHCP—does not address the current failure. Instead, check trunk permissions, native VLAN and uplink routing or management VLAN.

C:

The proposed alternative—use LLDP neighbor identities and physical port observations to reconcile cabling—does not address the current failure. Instead, check trunk permissions, native VLAN and uplink routing or management VLAN.

D:

The proposed alternative—inspect negotiation settings, transceiver and cable pairs before forcing speeds—does not address the current failure. Instead, check trunk permissions, native VLAN and uplink routing or management VLAN.

Question 52

At an industrial manufacturing site, the network engineering team reports that a newly installed access switch has link lights but is unreachable from the core. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Treat all unexpected reboots as routing-protocol convergence problems
  2. Assume a MAC address table always identifies the directly attached AP port
  3. Change default gateway metrics without checking DNS response content
  4. Replace every endpoint cable before checking the switch uplink VLAN list

Explanation

Correct Answer

D:

The shortcut at issue is to replace every endpoint cable before checking the switch uplink VLAN list. The corrective choice is: Check trunk permissions, native VLAN and uplink routing or management VLAN.

Incorrect Answers

A:

The shortcut to treat all unexpected reboots as routing-protocol convergence problems is not the error in this case. The actual risk comes from replace every endpoint cable before checking the switch uplink VLAN list.

B:

The shortcut to assume a MAC address table always identifies the directly attached AP port is not the error in this case. The actual risk comes from replace every endpoint cable before checking the switch uplink VLAN list.

C:

The shortcut to change default gateway metrics without checking DNS response content is not the error in this case. The actual risk comes from replace every endpoint cable before checking the switch uplink VLAN list.

Question 53

At an industrial manufacturing site, the network engineering team reports that a newly installed access switch has link lights but is unreachable from the core. Which technical reasoning most specifically justifies the recommended solution?

  1. Operational readiness includes rack power and thermal conditions as well as configuration
  2. A depleted DHCP pool can affect clients even when the wireless link is healthy
  3. Physical carrier does not guarantee the intended VLAN is transported
  4. Hardware and site differences demand controlled validation before fleet-wide change

Explanation

Correct Answer

C:

Physical carrier does not guarantee the intended VLAN is transported. This is the technical reason behind the proposed approach: “Check trunk permissions, native VLAN and uplink routing or management VLAN”. The result should be checked by “Compare allowed VLANs and management connectivity at both ends”.

Incorrect Answers

A:

The proposed alternative—operational readiness includes rack power and thermal conditions as well as configuration—does not address the current failure. Instead, check trunk permissions, native VLAN and uplink routing or management VLAN.

B:

The proposed alternative—a depleted DHCP pool can affect clients even when the wireless link is healthy—does not address the current failure. Instead, check trunk permissions, native VLAN and uplink routing or management VLAN.

D:

The proposed alternative—hardware and site differences demand controlled validation before fleet-wide change—does not address the current failure. Instead, check trunk permissions, native VLAN and uplink routing or management VLAN.

Question 54

At an industrial manufacturing site, the network engineering team reports that a newly installed access switch has link lights but is unreachable from the core. Which test would most directly show that the requested outcome was achieved?

  1. Trace management-originated packets and the selected next hop
  2. Compare allowed VLANs and management connectivity at both ends
  3. Compare hardware serials and assigned sites with the source inventory
  4. Review DHCP discover-offer exchanges and free lease counts

Explanation

Correct Answer

B:

The outcome check is to compare allowed VLANs and management connectivity at both ends. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—trace management-originated packets and the selected next hop—does not test the required result. Instead, compare allowed VLANs and management connectivity at both ends.

C:

The suggested check—compare hardware serials and assigned sites with the source inventory—does not test the required result. Instead, compare allowed VLANs and management connectivity at both ends.

D:

The suggested check—review DHCP discover-offer exchanges and free lease counts—does not test the required result. Instead, compare allowed VLANs and management connectivity at both ends.

Question 55

At an industrial manufacturing site, the network engineering team reports that a newly installed access switch has link lights but is unreachable from the core. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Check trunk permissions, native VLAN and uplink routing or management VLAN
  2. Test one host in each segment and trace allowed and denied paths
  3. Separate common configuration from validated per-site addresses and interfaces
  4. Confirm the management VRF, default route, DNS and allowed egress independently
  5. Compare allowed VLANs and management connectivity at both ends

Explanation

Correct Answers

A:

The selected action is Check trunk permissions, native VLAN and uplink routing or management VLAN. Its matching outcome check is to compare allowed VLANs and management connectivity at both ends.

E:

The selected action is Compare allowed VLANs and management connectivity at both ends. Its matching outcome check is to compare allowed VLANs and management connectivity at both ends.

Incorrect Answers

B:

The proposed alternative—test one host in each segment and trace allowed and denied paths—does not address the current failure. Instead, check trunk permissions, native VLAN and uplink routing or management VLAN.

C:

The proposed alternative—separate common configuration from validated per-site addresses and interfaces—does not address the current failure. Instead, check trunk permissions, native VLAN and uplink routing or management VLAN.

D:

The proposed alternative—confirm the management VRF, default route, DNS and allowed egress independently—does not address the current failure. Instead, check trunk permissions, native VLAN and uplink routing or management VLAN.

Question 56

At a university engineering campus, the engineering team reports that a technician moves an AP cable and the documented neighbor port no longer matches reality. Which configuration or operating decision most directly addresses the issue?

  1. Test DNS lookup and resolver reachability before changing layer-3 routes
  2. Verify optic type, wavelength, fiber distance and supported port mode on both ends
  3. Use LLDP neighbor identities and physical port observations to reconcile cabling
  4. Validate DNS resolution and discovery or provisioning parameters after DHCP

Explanation

Correct Answer

C:

Use LLDP neighbor identities and physical port observations to reconcile cabling. LLDP advertises adjacent devices and ports, not the complete end-to-end path. Confirm the result using this test: Compare LLDP system IDs and interface descriptions at both peers.

Incorrect Answers

A:

The proposed alternative—test DNS lookup and resolver reachability before changing layer-3 routes—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

B:

The proposed alternative—verify optic type, wavelength, fiber distance and supported port mode on both ends—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

D:

The proposed alternative—validate DNS resolution and discovery or provisioning parameters after DHCP—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

Question 57

At a university engineering campus, the engineering team reports that a technician moves an AP cable and the documented neighbor port no longer matches reality. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume a MAC address table always identifies the directly attached AP port
  2. Use one flat untagged VLAN and depend only on device names for separation
  3. Send an unreviewed global push to every branch because lab testing passed
  4. Change default gateway metrics without checking DNS response content

Explanation

Correct Answer

A:

The shortcut at issue is to assume a MAC address table always identifies the directly attached AP port. The corrective choice is: Use LLDP neighbor identities and physical port observations to reconcile cabling.

Incorrect Answers

B:

The shortcut to use one flat untagged VLAN and depend only on device names for separation is not the error in this case. The actual risk comes from assuming a MAC address table always identifies the directly attached AP port.

C:

The shortcut to send an unreviewed global push to every branch because lab testing passed is not the error in this case. The actual risk comes from assuming a MAC address table always identifies the directly attached AP port.

D:

The shortcut to change default gateway metrics without checking DNS response content is not the error in this case. The actual risk comes from assuming a MAC address table always identifies the directly attached AP port.

Question 58

At a university engineering campus, the engineering team reports that a technician moves an AP cable and the documented neighbor port no longer matches reality. Which technical reasoning most specifically justifies the recommended solution?

  1. LLDP advertises adjacent devices and ports, not the complete end-to-end path
  2. Configuration drift must be reconciled against an actual approved revision
  3. Logical segmentation can share infrastructure while keeping access policy distinct
  4. Management-plane traffic can use a separate routing context from user traffic

Explanation

Correct Answer

A:

LLDP advertises adjacent devices and ports, not the complete end-to-end path. This is the technical reason behind the proposed approach: “Use LLDP neighbor identities and physical port observations to reconcile cabling”. The result should be checked by “Compare LLDP system IDs and interface descriptions at both peers”.

Incorrect Answers

B:

The proposed alternative—configuration drift must be reconciled against an actual approved revision—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

C:

The proposed alternative—logical segmentation can share infrastructure while keeping access policy distinct—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

D:

The proposed alternative—management-plane traffic can use a separate routing context from user traffic—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

Question 59

At a university engineering campus, the engineering team reports that a technician moves an AP cable and the documented neighbor port no longer matches reality. Which test would most directly show that the requested outcome was achieved?

  1. Trace management-originated packets and the selected next hop
  2. Compare hardware serials and assigned sites with the source inventory
  3. Correlate uptime reset events with power and temperature telemetry
  4. Compare LLDP system IDs and interface descriptions at both peers

Explanation

Correct Answer

D:

The outcome check is to compare LLDP system IDs and interface descriptions at both peers. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—trace management-originated packets and the selected next hop—does not test the required result. Instead, compare LLDP system IDs and interface descriptions at both peers.

B:

The suggested check—compare hardware serials and assigned sites with the source inventory—does not test the required result. Instead, compare LLDP system IDs and interface descriptions at both peers.

C:

The suggested check—correlate uptime reset events with power and temperature telemetry—does not test the required result. Instead, compare LLDP system IDs and interface descriptions at both peers.

Question 60

At a university engineering campus, the engineering team reports that a technician moves an AP cable and the documented neighbor port no longer matches reality. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Use LLDP neighbor identities and physical port observations to reconcile cabling
  2. Compare allowed VLANs and management connectivity at both ends
  3. Compare LLDP system IDs and interface descriptions at both peers
  4. Check facility power, PoE load, environmental limits and hardware logs
  5. Inspect scope utilization, exclusions and lease behavior before expanding capacity

Explanation

Correct Answers

A:

The selected action is Use LLDP neighbor identities and physical port observations to reconcile cabling. Its matching outcome check is to compare LLDP system IDs and interface descriptions at both peers.

C:

The selected action is Compare LLDP system IDs and interface descriptions at both peers. Its matching outcome check is to compare LLDP system IDs and interface descriptions at both peers.

Incorrect Answers

B:

The proposed alternative—compare allowed VLANs and management connectivity at both ends—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

D:

The proposed alternative—check facility power, PoE load, environmental limits and hardware logs—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

E:

The proposed alternative—inspect scope utilization, exclusions and lease behavior before expanding capacity—does not address the current failure. Instead, use LLDP neighbor identities and physical port observations to reconcile cabling.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests