Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 48

Question 470

At a regional hospital network, the network team reports that two Aruba CX routing interfaces exchange OSPF Hellos but remain in ExStart. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Capture relay transaction and verify correct gateway-address field
  2. Compare OSPF interface MTU and database-description negotiation at both peers
  3. Use supported policy-based routing with ordered, narrowly matched traffic criteria
  4. Ensure the specified next hop resolves through an installed reachable route
  5. Inspect neighbor state and MTU after correcting the link configuration

Explanation

Correct Answers

B:

The selected action is Compare OSPF interface MTU and database-description negotiation at both peers. Its matching outcome check is to inspect neighbor state and MTU after correcting the link configuration.

E:

The selected action is Inspect neighbor state and MTU after correcting the link configuration. Its matching outcome check is to inspect neighbor state and MTU after correcting the link configuration.

Incorrect Answers

A:

The proposed alternative—capture relay transaction and verify correct gateway-address field—does not address this requirement. An MTU discrepancy can prevent normal database synchronization.

C:

The proposed alternative—use supported policy-based routing with ordered, narrowly matched traffic criteria—does not address this requirement. An MTU discrepancy can prevent normal database synchronization.

D:

The proposed alternative—ensure the specified next hop resolves through an installed reachable route—does not address this requirement. An MTU discrepancy can prevent normal database synchronization.

Question 471

At an industrial manufacturing site, the network engineering team reports that neighbors on a campus routed uplink never form OSPF adjacency because each uses a different area. Which configuration or operating decision most directly addresses the issue?

  1. Align area IDs and compatible interface settings on the intended link
  2. Verify router advertisement settings and permitted prefixes on the VLAN
  3. Align the supported authentication method, keys and relevant lifetimes securely
  4. Apply explicit outbound prefix-list or route-map policy on the BGP peer

Explanation

Correct Answer

A:

Align area IDs and compatible interface settings on the intended link. OSPF neighbors must agree on their common area's identity and parameters. Confirm the result using this test: Capture Hellos and verify both peers become Full in the intended area.

Incorrect Answers

B:

The proposed alternative—verify router advertisement settings and permitted prefixes on the VLAN—does not address this requirement. OSPF neighbors must agree on their common area's identity and parameters.

C:

The proposed alternative—align the supported authentication method, keys and relevant lifetimes securely—does not address this requirement. OSPF neighbors must agree on their common area's identity and parameters.

D:

The proposed alternative—apply explicit outbound prefix-list or route-map policy on the BGP peer—does not address this requirement. OSPF neighbors must agree on their common area's identity and parameters.

Question 472

At an industrial manufacturing site, the network engineering team reports that neighbors on a campus routed uplink never form OSPF adjacency because each uses a different area. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Configure unrelated BGP local preference as the solution for mismatched OSPF areas
  2. Assume IPv4 DHCP option 3 configures the IPv6 default gateway
  3. Enable every peer route and assume firewall ACLs prevent routing-table growth
  4. Increase static route priority and expect the OSPF database exchange to finish

Explanation

Correct Answer

A:

The shortcut at issue is to configure unrelated BGP local preference as the solution for mismatched OSPF areas. OSPF neighbors must agree on their common area's identity and parameters. The corrective choice is: Align area IDs and compatible interface settings on the intended link.

Incorrect Answers

B:

The shortcut to assume IPv4 DHCP option 3 configures the IPv6 default gateway is not the error in this case. The actual risk comes from configure unrelated BGP local preference as the solution for mismatched OSPF areas.

C:

The shortcut to enable every peer route and assume firewall ACLs prevent routing-table growth is not the error in this case. The actual risk comes from configure unrelated BGP local preference as the solution for mismatched OSPF areas.

D:

The shortcut to increase static route priority and expect the OSPF database exchange to finish is not the error in this case. The actual risk comes from configure unrelated BGP local preference as the solution for mismatched OSPF areas.

Question 473

At an industrial manufacturing site, the network engineering team reports that neighbors on a campus routed uplink never form OSPF adjacency because each uses a different area. Which technical reasoning most specifically justifies the recommended solution?

  1. VRFs isolate route tables so overlapping addresses need not share reachability
  2. OSPF neighbors must agree on their common area's identity and parameters
  3. OSPF chooses paths based on its computed metrics and available topology
  4. An MTU discrepancy can prevent normal database synchronization

Explanation

Correct Answer

B:

OSPF neighbors must agree on their common area's identity and parameters. This is the technical reason behind the proposed approach: “Align area IDs and compatible interface settings on the intended link”. The result should be checked by “Capture Hellos and verify both peers become Full in the intended area”.

Incorrect Answers

A:

The proposed alternative—vRFs isolate route tables so overlapping addresses need not share reachability—does not address this requirement. OSPF neighbors must agree on their common area's identity and parameters.

C:

The proposed alternative—oSPF chooses paths based on its computed metrics and available topology—does not address this requirement. OSPF neighbors must agree on their common area's identity and parameters.

D:

The proposed alternative—an MTU discrepancy can prevent normal database synchronization—does not address this requirement. OSPF neighbors must agree on their common area's identity and parameters.

Question 474

At an industrial manufacturing site, the network engineering team reports that neighbors on a campus routed uplink never form OSPF adjacency because each uses a different area. Which test would most directly show that the requested outcome was achieved?

  1. Measure BFD state, route withdrawal and forwarding convergence
  2. Inspect BGP best-path attributes from multiple internal routers
  3. Capture Hellos and verify both peers become Full in the intended area
  4. Compare VRF route tables and deny unintended cross-VRF traffic

Explanation

Correct Answer

C:

The outcome check is to capture Hellos and verify both peers become Full in the intended area. It measures whether the stated requirement was met. OSPF neighbors must agree on their common area's identity and parameters.

Incorrect Answers

A:

The suggested check—measure BFD state, route withdrawal and forwarding convergence—does not test the required result. Instead, capture Hellos and verify both peers become Full in the intended area.

B:

The suggested check—inspect BGP best-path attributes from multiple internal routers—does not test the required result. Instead, capture Hellos and verify both peers become Full in the intended area.

D:

The suggested check—compare VRF route tables and deny unintended cross-VRF traffic—does not test the required result. Instead, capture Hellos and verify both peers become Full in the intended area.

Question 475

At an industrial manufacturing site, the network engineering team reports that neighbors on a campus routed uplink never form OSPF adjacency because each uses a different area. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Capture Hellos and verify both peers become Full in the intended area
  2. Capture relay transaction and verify correct gateway-address field
  3. Apply the intended local-preference policy to the appropriate learned path
  4. Align area IDs and compatible interface settings on the intended link
  5. Configure and validate the appropriate OSPFv3 instance, interfaces and area settings

Explanation

Correct Answers

A:

The selected action is Capture Hellos and verify both peers become Full in the intended area. Its matching outcome check is to capture Hellos and verify both peers become Full in the intended area.

D:

The selected action is Align area IDs and compatible interface settings on the intended link. Its matching outcome check is to capture Hellos and verify both peers become Full in the intended area.

Incorrect Answers

B:

The proposed alternative—capture relay transaction and verify correct gateway-address field—does not address this requirement. OSPF neighbors must agree on their common area's identity and parameters.

C:

The proposed alternative—apply the intended local-preference policy to the appropriate learned path—does not address this requirement. OSPF neighbors must agree on their common area's identity and parameters.

E:

The proposed alternative—configure and validate the appropriate OSPFv3 instance, interfaces and area settings—does not address this requirement. OSPF neighbors must agree on their common area's identity and parameters.

Question 476

At a university engineering campus, the engineering team reports that OSPF neighbors stop forming immediately after one side enables key-based authentication. Which configuration or operating decision most directly addresses the issue?

  1. Configure and validate the appropriate OSPFv3 instance, interfaces and area settings
  2. Place the appropriate interfaces in separate VRFs and enforce reviewed route-leak policy
  3. Align the supported authentication method, keys and relevant lifetimes securely
  4. Apply the intended local-preference policy to the appropriate learned path

Explanation

Correct Answer

C:

Align the supported authentication method, keys and relevant lifetimes securely. Routing neighbors reject mismatched authentication rather than forming unsafe sessions. Confirm the result using this test: Inspect authentication logs and a successful neighbor exchange.

Incorrect Answers

A:

The proposed alternative—configure and validate the appropriate OSPFv3 instance, interfaces and area settings—does not address the current failure. Instead, align the supported authentication method, keys and relevant lifetimes securely.

B:

The proposed alternative—place the appropriate interfaces in separate VRFs and enforce reviewed route-leak policy—does not address the current failure. Instead, align the supported authentication method, keys and relevant lifetimes securely.

D:

The proposed alternative—apply the intended local-preference policy to the appropriate learned path—does not address the current failure. Instead, align the supported authentication method, keys and relevant lifetimes securely.

Question 477

At a university engineering campus, the engineering team reports that OSPF neighbors stop forming immediately after one side enables key-based authentication. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Disable routing authentication permanently because one neighbor failed
  2. Assume OSPFv2 automatically exchanges IPv6 prefixes with no OSPFv3 setup
  3. Merge all tenant routes globally because one DNS server is common
  4. Assume IPv4 DHCP option 3 configures the IPv6 default gateway

Explanation

Correct Answer

A:

The shortcut at issue is to disable routing authentication permanently because one neighbor failed. The corrective choice is: Align the supported authentication method, keys and relevant lifetimes securely.

Incorrect Answers

B:

The shortcut to assume OSPFv2 automatically exchanges IPv6 prefixes with no OSPFv3 setup is not the error in this case. The actual risk comes from disable routing authentication permanently because one neighbor failed.

C:

The shortcut to merge all tenant routes globally because one DNS server is common is not the error in this case. The actual risk comes from disable routing authentication permanently because one neighbor failed.

D:

The shortcut to assume IPv4 DHCP option 3 configures the IPv6 default gateway is not the error in this case. The actual risk comes from disable routing authentication permanently because one neighbor failed.

Question 478

At a university engineering campus, the engineering team reports that OSPF neighbors stop forming immediately after one side enables key-based authentication. Which technical reasoning most specifically justifies the recommended solution?

  1. Routing neighbors reject mismatched authentication rather than forming unsafe sessions
  2. OSPF neighbors must agree on their common area's identity and parameters
  3. Shared services require explicit reachability without dissolving VRF isolation
  4. Filtering route advertisements reduces unintended reachability and exposure

Explanation

Correct Answer

A:

Routing neighbors reject mismatched authentication rather than forming unsafe sessions. This is the technical reason behind the proposed approach: “Align the supported authentication method, keys and relevant lifetimes securely”. The result should be checked by “Inspect authentication logs and a successful neighbor exchange”.

Incorrect Answers

B:

The proposed alternative—oSPF neighbors must agree on their common area's identity and parameters—does not address the current failure. Instead, align the supported authentication method, keys and relevant lifetimes securely.

C:

The proposed alternative—shared services require explicit reachability without dissolving VRF isolation—does not address the current failure. Instead, align the supported authentication method, keys and relevant lifetimes securely.

D:

The proposed alternative—filtering route advertisements reduces unintended reachability and exposure—does not address the current failure. Instead, align the supported authentication method, keys and relevant lifetimes securely.

Question 479

At a university engineering campus, the engineering team reports that OSPF neighbors stop forming immediately after one side enables key-based authentication. Which test would most directly show that the requested outcome was achieved?

  1. Inject an oversized lab announcement and inspect rejection and alarms
  2. Inspect advertised routes and confirm the prohibited prefix is absent
  3. Inspect installed next hops and flow distribution across both paths
  4. Inspect authentication logs and a successful neighbor exchange

Explanation

Correct Answer

D:

The outcome check is to inspect authentication logs and a successful neighbor exchange. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—inject an oversized lab announcement and inspect rejection and alarms—does not test the required result. Instead, inspect authentication logs and a successful neighbor exchange.

B:

The suggested check—inspect advertised routes and confirm the prohibited prefix is absent—does not test the required result. Instead, inspect authentication logs and a successful neighbor exchange.

C:

The suggested check—inspect installed next hops and flow distribution across both paths—does not test the required result. Instead, inspect authentication logs and a successful neighbor exchange.

Question 480

At a university engineering campus, the engineering team reports that OSPF neighbors stop forming immediately after one side enables key-based authentication. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Inspect authentication logs and a successful neighbor exchange
  2. Tie default-route origination to a valid upstream route or supported reachability condition
  3. Align the supported authentication method, keys and relevant lifetimes securely
  4. Apply reviewed inbound filtering and maximum-prefix policy for that peer
  5. Inspect area parameters and advertised default or external routes

Explanation

Correct Answers

A:

The selected action is Inspect authentication logs and a successful neighbor exchange. Its matching outcome check is to inspect authentication logs and a successful neighbor exchange.

C:

The selected action is Align the supported authentication method, keys and relevant lifetimes securely. Its matching outcome check is to inspect authentication logs and a successful neighbor exchange.

Incorrect Answers

B:

The proposed alternative—tie default-route origination to a valid upstream route or supported reachability condition—does not address the current failure. Instead, align the supported authentication method, keys and relevant lifetimes securely.

D:

The proposed alternative—apply reviewed inbound filtering and maximum-prefix policy for that peer—does not address the current failure. Instead, align the supported authentication method, keys and relevant lifetimes securely.

E:

The proposed alternative—inspect area parameters and advertised default or external routes—does not address the current failure. Instead, align the supported authentication method, keys and relevant lifetimes securely.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests