Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 46

Question 450

At a university engineering campus, the engineering team reports that a branch SSID must keep local internet breakout but is accidentally tunneled to a distant gateway. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Select supported bridged or tunneled user traffic placement aligned with policy
  2. Compare station distribution and effective throughput after RF tuning
  3. Select appropriately non-overlapping channels and verify regulatory constraints
  4. Validate predictive RF design through an active post-installation site survey
  5. Trace client traffic from AP to gateway and actual egress

Explanation

Correct Answers

A:

The selected action is Select supported bridged or tunneled user traffic placement aligned with policy. Its matching outcome check is to trace client traffic from AP to gateway and actual egress.

E:

The selected action is Trace client traffic from AP to gateway and actual egress. Its matching outcome check is to trace client traffic from AP to gateway and actual egress.

Incorrect Answers

B:

The proposed alternative—compare station distribution and effective throughput after RF tuning—does not address the current failure. Instead, select supported bridged or tunneled user traffic placement aligned with policy.

C:

The proposed alternative—select appropriately non-overlapping channels and verify regulatory constraints—does not address the current failure. Instead, select supported bridged or tunneled user traffic placement aligned with policy.

D:

The proposed alternative—validate predictive RF design through an active post-installation site survey—does not address the current failure. Instead, select supported bridged or tunneled user traffic placement aligned with policy.

Question 451

At a city-government services campus, the support engineering team reports that an office floor plan was designed without accounting for metal partitions installed later. Which configuration or operating decision most directly addresses the issue?

  1. Evaluate supported fast transition security with handset compatibility testing
  2. Enable supported neighbor-report assistance and check client compatibility
  3. Design cells and radio reuse for airtime capacity rather than coverage alone
  4. Validate predictive RF design through an active post-installation site survey

Explanation

Correct Answer

D:

Validate predictive RF design through an active post-installation site survey. Real obstacles and device placement can differ from planning assumptions. Confirm the result using this test: Measure RSSI, SNR and roaming at representative user locations.

Incorrect Answers

A:

The proposed alternative—evaluate supported fast transition security with handset compatibility testing—does not address this requirement. Real obstacles and device placement can differ from planning assumptions.

B:

The proposed alternative—enable supported neighbor-report assistance and check client compatibility—does not address this requirement. Real obstacles and device placement can differ from planning assumptions.

C:

The proposed alternative—design cells and radio reuse for airtime capacity rather than coverage alone—does not address this requirement. Real obstacles and device placement can differ from planning assumptions.

Question 452

At a city-government services campus, the support engineering team reports that an office floor plan was designed without accounting for metal partitions installed later. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Increase 2.4 GHz channel count beyond the available non-overlapping plan
  2. Treat a planning heat map as permanent proof of delivered radio coverage
  3. Enable fast transition for every legacy client without testing its supplicant
  4. Increase AP beacon rate and assume two distant clients can hear each other

Explanation

Correct Answer

B:

The shortcut at issue is to treat a planning heat map as permanent proof of delivered radio coverage. Real obstacles and device placement can differ from planning assumptions. The corrective choice is: Validate predictive RF design through an active post-installation site survey.

Incorrect Answers

A:

The shortcut to increase 2.4 GHz channel count beyond the available non-overlapping plan is not the error in this case. The actual risk comes from treat a planning heat map as permanent proof of delivered radio coverage.

C:

The shortcut to enable fast transition for every legacy client without testing its supplicant is not the error in this case. The actual risk comes from treat a planning heat map as permanent proof of delivered radio coverage.

D:

The shortcut to increase AP beacon rate and assume two distant clients can hear each other is not the error in this case. The actual risk comes from treat a planning heat map as permanent proof of delivered radio coverage.

Question 453

At a city-government services campus, the support engineering team reports that an office floor plan was designed without accounting for metal partitions installed later. Which technical reasoning most specifically justifies the recommended solution?

  1. Wider usable channel availability can reduce contention for capable clients
  2. An overly powerful AP creates asymmetric downlink/uplink reachability
  3. Low-rate broadcast traffic can consume disproportionate WLAN airtime
  4. Real obstacles and device placement can differ from planning assumptions

Explanation

Correct Answer

D:

Real obstacles and device placement can differ from planning assumptions. This is the technical reason behind the proposed approach: “Validate predictive RF design through an active post-installation site survey”. The result should be checked by “Measure RSSI, SNR and roaming at representative user locations”.

Incorrect Answers

A:

The proposed alternative—wider usable channel availability can reduce contention for capable clients—does not address this requirement. Real obstacles and device placement can differ from planning assumptions.

B:

The proposed alternative—an overly powerful AP creates asymmetric downlink/uplink reachability—does not address this requirement. Real obstacles and device placement can differ from planning assumptions.

C:

The proposed alternative—low-rate broadcast traffic can consume disproportionate WLAN airtime—does not address this requirement. Real obstacles and device placement can differ from planning assumptions.

Question 454

At a city-government services campus, the support engineering team reports that an office floor plan was designed without accounting for metal partitions installed later. Which test would most directly show that the requested outcome was achieved?

  1. Trace guest DNS, redirect and final access role
  2. Measure RSSI, retries and roaming timeline across a walking path
  3. Measure RSSI, SNR and roaming at representative user locations
  4. Compare client uplink retries and roaming at coverage boundaries

Explanation

Correct Answer

C:

The outcome check is to measure RSSI, SNR and roaming at representative user locations. It measures whether the stated requirement was met. Real obstacles and device placement can differ from planning assumptions.

Incorrect Answers

A:

The suggested check—trace guest DNS, redirect and final access role—does not test the required result. Instead, measure RSSI, SNR and roaming at representative user locations.

B:

The suggested check—measure RSSI, retries and roaming timeline across a walking path—does not test the required result. Instead, measure RSSI, SNR and roaming at representative user locations.

D:

The suggested check—compare client uplink retries and roaming at coverage boundaries—does not test the required result. Instead, measure RSSI, SNR and roaming at representative user locations.

Question 455

At a city-government services campus, the support engineering team reports that an office floor plan was designed without accounting for metal partitions installed later. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Correlate radar events with channel moves and client outage duration
  2. Validate predictive RF design through an active post-installation site survey
  3. Validate RADIUS reachability and configured failover behavior before altering the passphrase
  4. Review client roaming behavior and radio design rather than force uncontrolled disconnects
  5. Measure RSSI, SNR and roaming at representative user locations

Explanation

Correct Answers

B:

The selected action is Validate predictive RF design through an active post-installation site survey. Its matching outcome check is to measure RSSI, SNR and roaming at representative user locations.

E:

The selected action is Measure RSSI, SNR and roaming at representative user locations. Its matching outcome check is to measure RSSI, SNR and roaming at representative user locations.

Incorrect Answers

A:

The proposed alternative—correlate radar events with channel moves and client outage duration—does not address this requirement. Real obstacles and device placement can differ from planning assumptions.

C:

The proposed alternative—validate RADIUS reachability and configured failover behavior before altering the passphrase—does not address this requirement. Real obstacles and device placement can differ from planning assumptions.

D:

The proposed alternative—review client roaming behavior and radio design rather than force uncontrolled disconnects—does not address this requirement. Real obstacles and device placement can differ from planning assumptions.

Question 456

At a municipal public library system, the operations team reports that a default route through a failed ISP remains selected even though an alternative route exists. Which configuration or operating decision most directly addresses the issue?

  1. Align the supported authentication method, keys and relevant lifetimes securely
  2. Tie default-route origination to a valid upstream route or supported reachability condition
  3. Review static route distance and monitored next-hop availability for the intended preference
  4. Review stub or NSSA policy and gateway design against required external routes

Explanation

Correct Answer

C:

Review static route distance and monitored next-hop availability for the intended preference. Static preference must reflect usable paths rather than only configured route presence. Confirm the result using this test: Withdraw the primary path and inspect installed next hop and traffic.

Incorrect Answers

A:

The proposed alternative—align the supported authentication method, keys and relevant lifetimes securely—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

B:

The proposed alternative—tie default-route origination to a valid upstream route or supported reachability condition—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

D:

The proposed alternative—review stub or NSSA policy and gateway design against required external routes—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

Question 457

At a municipal public library system, the operations team reports that a default route through a failed ISP remains selected even though an alternative route exists. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume the numerically lowest distance detects physical upstream internet failure
  2. Adjust the WLAN channel plan to repair a BGP AS mismatch
  3. Disable routing authentication permanently because one neighbor failed
  4. Change only the DNS suffix and expect egress routing to change by application

Explanation

Correct Answer

A:

The shortcut at issue is to assume the numerically lowest distance detects physical upstream internet failure. Static preference must reflect usable paths rather than only configured route presence. The corrective choice is: Review static route distance and monitored next-hop availability for the intended preference.

Incorrect Answers

B:

The shortcut to adjust the WLAN channel plan to repair a BGP AS mismatch is not the error in this case. The actual risk comes from assuming the numerically lowest distance detects physical upstream internet failure.

C:

The shortcut to disable routing authentication permanently because one neighbor failed is not the error in this case. The actual risk comes from assuming the numerically lowest distance detects physical upstream internet failure.

D:

The shortcut to change only the DNS suffix and expect egress routing to change by application is not the error in this case. The actual risk comes from assuming the numerically lowest distance detects physical upstream internet failure.

Question 458

At a municipal public library system, the operations team reports that a default route through a failed ISP remains selected even though an alternative route exists. Which technical reasoning most specifically justifies the recommended solution?

  1. Static preference must reflect usable paths rather than only configured route presence
  2. OSPF neighbors must agree on their common area's identity and parameters
  3. Policy-based routing can select egress using attributes beyond destination routing
  4. IPv4 and IPv6 routing processes have separate protocol configuration paths

Explanation

Correct Answer

A:

Static preference must reflect usable paths rather than only configured route presence. This is the technical reason behind the proposed approach: “Review static route distance and monitored next-hop availability for the intended preference”. The result should be checked by “Withdraw the primary path and inspect installed next hop and traffic”.

Incorrect Answers

B:

The proposed alternative—oSPF neighbors must agree on their common area's identity and parameters—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

C:

The proposed alternative—policy-based routing can select egress using attributes beyond destination routing—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

D:

The proposed alternative—iPv4 and IPv6 routing processes have separate protocol configuration paths—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

Question 459

At a municipal public library system, the operations team reports that a default route through a failed ISP remains selected even though an alternative route exists. Which test would most directly show that the requested outcome was achieved?

  1. Withdraw the primary path and inspect installed next hop and traffic
  2. Verify best path and failover after a controlled cost change
  3. Check IPv6 neighbor state and learned IPv6 routes
  4. Test allowed DNS queries and prohibited cross-tenant routes

Explanation

Correct Answer

A:

The outcome check is to withdraw the primary path and inspect installed next hop and traffic. It measures whether the stated requirement was met. Static preference must reflect usable paths rather than only configured route presence.

Incorrect Answers

B:

The proposed alternative—verify best path and failover after a controlled cost change—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

C:

The proposed alternative—check IPv6 neighbor state and learned IPv6 routes—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

D:

The proposed alternative—test allowed DNS queries and prohibited cross-tenant routes—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

Question 460

At a municipal public library system, the operations team reports that a default route through a failed ISP remains selected even though an alternative route exists. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Withdraw the primary path and inspect installed next hop and traffic
  2. Inspect neighbor state and MTU after correcting the link configuration
  3. Apply explicit outbound prefix-list or route-map policy on the BGP peer
  4. Implement a narrowly scoped supported route-leak and matching firewall policy
  5. Review static route distance and monitored next-hop availability for the intended preference

Explanation

Correct Answers

A:

The selected action is Withdraw the primary path and inspect installed next hop and traffic.

E:

The selected action is Review static route distance and monitored next-hop availability for the intended preference.

Incorrect Answers

B:

The proposed alternative—inspect neighbor state and MTU after correcting the link configuration—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

C:

The proposed alternative—apply explicit outbound prefix-list or route-map policy on the BGP peer—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

D:

The proposed alternative—implement a narrowly scoped supported route-leak and matching firewall policy—does not address this requirement. Static preference must reflect usable paths rather than only configured route presence.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests