Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 17

Question 160

At an industrial manufacturing site, the network engineering team reports that an AP remains associated to its management service but its preferred gateway becomes unreachable. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Apply the supported split-detection design and controlled recovery procedure
  2. Force a planned gateway failover and inspect client continuity
  3. Configure supported AP gateway redundancy and verify tunnel/session recovery
  4. Compare tracked objects, priorities and preemption policy on the redundant pair
  5. Validate synchronization and shared forwarding in a lab failover

Explanation

Correct Answers

B:

The selected action is Force a planned gateway failover and inspect client continuity.

C:

The selected action is Configure supported AP gateway redundancy and verify tunnel/session recovery.

Incorrect Answers

A:

The proposed alternative—apply the supported split-detection design and controlled recovery procedure—does not address this requirement. Wireless control connectivity and user traffic forwarding can fail separately.

D:

The proposed alternative—compare tracked objects, priorities and preemption policy on the redundant pair—does not address this requirement. Wireless control connectivity and user traffic forwarding can fail separately.

E:

The proposed alternative—validate synchronization and shared forwarding in a lab failover—does not address this requirement. Wireless control connectivity and user traffic forwarding can fail separately.

Question 161

At a university engineering campus, the engineering team reports that a campus gateway upgrade resets active sessions even though a standby gateway is configured. Which configuration or operating decision most directly addresses the issue?

  1. Verify member identity, software compatibility and current approved group configuration
  2. Assign and verify primary and secondary spanning-tree root priorities for intended VLANs
  3. Check the supported state synchronization and maintenance sequence for that platform
  4. Apply the supported split-detection design and controlled recovery procedure

Explanation

Correct Answer

C:

Check the supported state synchronization and maintenance sequence for that platform. Redundant hardware does not guarantee every session survives a takeover. Confirm the result using this test: Run a controlled switchover and measure representative session recovery.

Incorrect Answers

A:

The proposed alternative—verify member identity, software compatibility and current approved group configuration—does not address the current failure. Instead, check the supported state synchronization and maintenance sequence for that platform.

B:

The proposed alternative—assign and verify primary and secondary spanning-tree root priorities for intended VLANs—does not address the current failure. Instead, check the supported state synchronization and maintenance sequence for that platform.

D:

The proposed alternative—apply the supported split-detection design and controlled recovery procedure—does not address the current failure. Instead, check the supported state synchronization and maintenance sequence for that platform.

Question 162

At a university engineering campus, the engineering team reports that a campus gateway upgrade resets active sessions even though a standby gateway is configured. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Route keepalive only across the same failed ISL and call it independent
  2. Rejoin live partitions blindly without checking active control ownership
  3. Trigger failover only after the entire gateway loses electrical power
  4. Assume two configured gateways automatically replicate all TCP states

Explanation

Correct Answer

D:

The shortcut at issue is to assume two configured gateways automatically replicate all TCP states. The corrective choice is: Check the supported state synchronization and maintenance sequence for that platform.

Incorrect Answers

A:

The shortcut to route keepalive only across the same failed ISL and call it independent is not the error in this case. The actual risk comes from assuming two configured gateways automatically replicate all TCP states.

B:

The shortcut to rejoin live partitions blindly without checking active control ownership is not the error in this case. The actual risk comes from assuming two configured gateways automatically replicate all TCP states.

C:

The shortcut to trigger failover only after the entire gateway loses electrical power is not the error in this case. The actual risk comes from assuming two configured gateways automatically replicate all TCP states.

Question 163

At a university engineering campus, the engineering team reports that a campus gateway upgrade resets active sessions even though a standby gateway is configured. Which technical reasoning most specifically justifies the recommended solution?

  1. Redundant hardware does not guarantee every session survives a takeover
  2. Consistent shared gateway identity avoids client neighbor confusion
  3. Failover policy must reflect service health rather than incidental port changes
  4. A separate keepalive path reduces ambiguity during an inter-switch failure

Explanation

Correct Answer

A:

Redundant hardware does not guarantee every session survives a takeover. This is the technical reason behind the proposed approach: “Check the supported state synchronization and maintenance sequence for that platform”. The result should be checked by “Run a controlled switchover and measure representative session recovery”.

Incorrect Answers

B:

The proposed alternative—consistent shared gateway identity avoids client neighbor confusion—does not address the current failure. Instead, check the supported state synchronization and maintenance sequence for that platform.

C:

The proposed alternative—failover policy must reflect service health rather than incidental port changes—does not address the current failure. Instead, check the supported state synchronization and maintenance sequence for that platform.

D:

The proposed alternative—a separate keepalive path reduces ambiguity during an inter-switch failure—does not address the current failure. Instead, check the supported state synchronization and maintenance sequence for that platform.

Question 164

At a university engineering campus, the engineering team reports that a campus gateway upgrade resets active sessions even though a standby gateway is configured. Which test would most directly show that the requested outcome was achieved?

  1. Force a planned gateway failover and inspect client continuity
  2. Run a controlled switchover and measure representative session recovery
  3. Measure default-gateway reachability during a switch failover
  4. Inspect ARP records and first-hop connectivity after peer switchover

Explanation

Correct Answer

B:

The outcome check is to run a controlled switchover and measure representative session recovery. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—force a planned gateway failover and inspect client continuity—does not test the required result. Instead, run a controlled switchover and measure representative session recovery.

C:

The suggested check—measure default-gateway reachability during a switch failover—does not test the required result. Instead, run a controlled switchover and measure representative session recovery.

D:

The suggested check—inspect ARP records and first-hop connectivity after peer switchover—does not test the required result. Instead, run a controlled switchover and measure representative session recovery.

Question 165

At a university engineering campus, the engineering team reports that a campus gateway upgrade resets active sessions even though a standby gateway is configured. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Configure a resilient virtual gateway mechanism with monitored upstream reachability
  2. Check the supported state synchronization and maintenance sequence for that platform
  3. Inspect VSF link topology, member IDs and compatible software before recovery
  4. Test a controlled peer failure and inspect LACP and forwarding
  5. Run a controlled switchover and measure representative session recovery

Explanation

Correct Answers

B:

The selected action is Check the supported state synchronization and maintenance sequence for that platform. Its matching outcome check is to run a controlled switchover and measure representative session recovery.

E:

The selected action is Run a controlled switchover and measure representative session recovery. Its matching outcome check is to run a controlled switchover and measure representative session recovery.

Incorrect Answers

A:

The proposed alternative—configure a resilient virtual gateway mechanism with monitored upstream reachability—does not address the current failure. Instead, check the supported state synchronization and maintenance sequence for that platform.

C:

The proposed alternative—inspect VSF link topology, member IDs and compatible software before recovery—does not address the current failure. Instead, check the supported state synchronization and maintenance sequence for that platform.

D:

The proposed alternative—test a controlled peer failure and inspect LACP and forwarding—does not address the current failure. Instead, check the supported state synchronization and maintenance sequence for that platform.

Question 166

At a city-government services campus, the support engineering team reports that a standby distribution switch unexpectedly takes over after a harmless link event. Which configuration or operating decision most directly addresses the issue?

  1. Assign and verify primary and secondary spanning-tree root priorities for intended VLANs
  2. Compare tracked objects, priorities and preemption policy on the redundant pair
  3. Configure supported AP gateway redundancy and verify tunnel/session recovery
  4. Monitor appropriate upstream health and couple it to gateway failover policy

Explanation

Correct Answer

B:

Compare tracked objects, priorities and preemption policy on the redundant pair. Failover policy must reflect service health rather than incidental port changes. Confirm the result using this test: Reproduce the event and inspect priority and active role history.

Incorrect Answers

A:

The proposed alternative—assign and verify primary and secondary spanning-tree root priorities for intended VLANs—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

C:

The proposed alternative—configure supported AP gateway redundancy and verify tunnel/session recovery—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

D:

The proposed alternative—monitor appropriate upstream health and couple it to gateway failover policy—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

Question 167

At a city-government services campus, the support engineering team reports that a standby distribution switch unexpectedly takes over after a harmless link event. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Rejoin live partitions blindly without checking active control ownership
  2. Raise all priorities to the same value without validating tracked interfaces
  3. Restore any old backup without comparing stack or peer identifiers
  4. Give every access port bridge the same root priority and rely on luck

Explanation

Correct Answer

B:

The shortcut at issue is to raise all priorities to the same value without validating tracked interfaces. Failover policy must reflect service health rather than incidental port changes. The corrective choice is: Compare tracked objects, priorities and preemption policy on the redundant pair.

Incorrect Answers

A:

The shortcut to rejoin live partitions blindly without checking active control ownership is not the error in this case. The actual risk comes from raise all priorities to the same value without validating tracked interfaces.

C:

The shortcut to restore any old backup without comparing stack or peer identifiers is not the error in this case. The actual risk comes from raise all priorities to the same value without validating tracked interfaces.

D:

The shortcut to give every access port bridge the same root priority and rely on luck is not the error in this case. The actual risk comes from raise all priorities to the same value without validating tracked interfaces.

Question 168

At a city-government services campus, the support engineering team reports that a standby distribution switch unexpectedly takes over after a harmless link event. Which technical reasoning most specifically justifies the recommended solution?

  1. A proper VSX MC-LAG provides links to both peers under one downstream LAG
  2. Split detection prevents conflicting active control during stack partitions
  3. Failover policy must reflect service health rather than incidental port changes
  4. A virtual gateway provides a stable first hop across routing-device failure

Explanation

Correct Answer

C:

Failover policy must reflect service health rather than incidental port changes. This is the technical reason behind the proposed approach: “Compare tracked objects, priorities and preemption policy on the redundant pair”. The result should be checked by “Reproduce the event and inspect priority and active role history”.

Incorrect Answers

A:

The proposed alternative—a proper VSX MC-LAG provides links to both peers under one downstream LAG—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

B:

The proposed alternative—split detection prevents conflicting active control during stack partitions—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

D:

The proposed alternative—a virtual gateway provides a stable first hop across routing-device failure—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

Question 169

At a city-government services campus, the support engineering team reports that a standby distribution switch unexpectedly takes over after a harmless link event. Which test would most directly show that the requested outcome was achieved?

  1. Reproduce the event and inspect priority and active role history
  2. Check keepalive ping, VSX state and link-failure behavior
  3. Inspect ISL state and VSX consistency diagnostics on both peers
  4. Test a controlled peer failure and inspect LACP and forwarding

Explanation

Correct Answer

A:

The outcome check is to reproduce the event and inspect priority and active role history. It measures whether the stated requirement was met. Failover policy must reflect service health rather than incidental port changes.

Incorrect Answers

B:

The proposed alternative—check keepalive ping, VSX state and link-failure behavior—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

C:

The proposed alternative—inspect ISL state and VSX consistency diagnostics on both peers—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

D:

The proposed alternative—test a controlled peer failure and inspect LACP and forwarding—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

Question 170

At a city-government services campus, the support engineering team reports that a standby distribution switch unexpectedly takes over after a harmless link event. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Restore the dedicated VSX keepalive path and review its separation from the ISL
  2. Reproduce the event and inspect priority and active role history
  3. Inspect VSF link topology, member IDs and compatible software before recovery
  4. Test failure of one uplink while monitoring loop and forwarding state
  5. Compare tracked objects, priorities and preemption policy on the redundant pair

Explanation

Correct Answers

B:

The selected action is Reproduce the event and inspect priority and active role history.

E:

The selected action is Compare tracked objects, priorities and preemption policy on the redundant pair.

Incorrect Answers

A:

The proposed alternative—restore the dedicated VSX keepalive path and review its separation from the ISL—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

C:

The proposed alternative—inspect VSF link topology, member IDs and compatible software before recovery—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

D:

The proposed alternative—test failure of one uplink while monitoring loop and forwarding state—does not address this requirement. Failover policy must reflect service health rather than incidental port changes.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests