Practice Exams:

Fortinet FCP_FGT_AD-7.6 Dumps

EXAM: FCP - FortiGate 7.6 Administrator
Verified By Experts
Premium Bundle
$49.99

FCP_FGT_AD-7.6 Premium ETE File


  • Premium File 128 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Fortinet FCP_FGT_AD-7.6 Practice Test 54

Question 530

A robotics plant enabled a stronger IKE suite on one end but forgot to update its remote branch firewall. Which combined implementation and verification plan most reliably resolves this specific FortiOS 7.6 issue?

  1. For the robotics plant deployment: Implement: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Verify: Inspect both peers' IKE negotiation logs and confirm a stable phase-one SA after matching supported parameters.
  2. For the robotics plant deployment: Implement: Compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules. Verify: Inspect both peers' IKE negotiation logs and confirm a stable phase-one SA after matching supported parameters.
  3. For the robotics plant deployment: Implement: Compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules. Verify: Verify tunnel interface and route status, send a packet to the remote protected prefix and check matching policy and tunnel byte counters.
  4. For the robotics plant deployment: Implement: Check UDP 500/4500 path and supported NAT traversal settings when an IPsec peer sits behind address translation. Verify: Trace the peer handshake and UDP port negotiation on both sides of the NAT device, then confirm encrypted byte counters advance.

Answer & Explanations

Correct answer: B

A.

This action and check address the alternate operation “For the robotics plant deployment: Implement: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site…” instead of the stated acceptance requirement. The matching action is to compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules. Its confirming test is to inspect both peers' IKE negotiation logs and confirm a stable phase-one SA after matching supported parameters.

B.

The situation is that a robotics plant enabled a stronger IKE suite on one end but forgot to update its remote branch firewall. Implement: Compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules. Verify: Inspect both peers' IKE negotiation logs and confirm a stable phase-one SA after matching supported parameters. This pairing is justified because the IKE phase-one negotiation requires compatible cryptographic and identity settings; a mismatch prevents establishing the security association.

C.

This action and check address the alternate operation “For the robotics plant deployment: Implement: Compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints…” instead of the stated acceptance requirement. The matching action is to compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules. Its confirming test is to inspect both peers' IKE negotiation logs and confirm a stable phase-one SA after matching supported parameters.

D.

The situation is that a robotics plant enabled a stronger IKE suite on one end but forgot to update its remote branch firewall. This action and check address the distinct objective “Account for NAT traversal of IKE and IPsec” instead of the stated acceptance requirement. The matching action is to compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules. Its confirming test is to inspect both peers' IKE negotiation logs and confirm a stable phase-one SA after matching supported parameters.

Question 531

A hospital headquarters VPN shows an IKE connection but an added imaging subnet cannot communicate with a remote clinic. Which FortiOS 7.6 administrative change best meets this requirement without weakening unrelated controls?

  1. For the hospital headquarters VPN shows an IKE connection but an deployment: Compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules.
  2. For the hospital headquarters VPN shows an IKE connection but an deployment: Configure an interface-based IPsec tunnel with a route and bidirectional firewall policy matching the intended protected networks.
  3. For the hospital headquarters VPN shows an IKE connection but an deployment: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes.
  4. For the hospital headquarters VPN shows an IKE connection but an deployment: Check UDP 500/4500 path and supported NAT traversal settings when an IPsec peer sits behind address translation.

Answer & Explanations

Correct answer: C

A.

This option addresses the distinct objective “Repair mismatched IKE phase-one proposals”, not the immediate requirement. The IKE phase-one negotiation requires compatible cryptographic and identity settings; a mismatch prevents establishing the security association. For the stated case, even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

B.

This option addresses the distinct objective “Add route and policy for an interface-based IPsec tunnel”, not the immediate requirement. An established IPsec tunnel alone does not tell FortiOS to forward selected traffic through it or permit that traffic through security policy. For the stated case, even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

C.

Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. This resolves the issue because even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs. To verify, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

D.

This option addresses the distinct objective “Account for NAT traversal of IKE and IPsec”, not the immediate requirement. NAT traversal encapsulates ESP in UDP 4500 where negotiated and needed; an intermediary that drops required IKE or UDP-encapsulated traffic can break tunnel establishment or data. For the stated case, even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

Question 532

A hospital headquarters VPN shows an IKE connection but an added imaging subnet cannot communicate with a remote clinic. The engineer proposes this change: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes Which explanation most accurately establishes why that change meets the operational requirement?

  1. For the hospital headquarters VPN shows an IKE connection but an deployment: An established IPsec tunnel alone does not tell FortiOS to forward selected traffic through it or permit that traffic through security policy.
  2. For the hospital headquarters VPN shows an IKE connection but an deployment: NAT traversal encapsulates ESP in UDP 4500 where negotiated and needed; an intermediary that drops required IKE or UDP-encapsulated traffic can break tunnel establishment or data.
  3. For the hospital headquarters VPN shows an IKE connection but an deployment: The IKE phase-one negotiation requires compatible cryptographic and identity settings; a mismatch prevents establishing the security association.
  4. For the hospital headquarters VPN shows an IKE connection but an deployment: Even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

Answer & Explanations

Correct answer: D

A.

That statement explains the distinct objective “Add route and policy for an interface-based IPsec tunnel” rather than the cause in this case. The deciding mechanism here is that even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

B.

That statement explains the distinct objective “Account for NAT traversal of IKE and IPsec” rather than the cause in this case. The deciding mechanism here is that even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

C.

That statement explains the distinct objective “Repair mismatched IKE phase-one proposals” rather than the cause in this case. The deciding mechanism here is that even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

D.

Even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs. It supports this action: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. To confirm, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

Question 533

A hospital headquarters VPN shows an IKE connection but an added imaging subnet cannot communicate with a remote clinic. After implementing this change—Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes—which test best establishes that the intended outcome is actually working?

  1. For the hospital headquarters VPN shows an IKE connection but an deployment: Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.
  2. For the hospital headquarters VPN shows an IKE connection but an deployment: Verify tunnel interface and route status, send a packet to the remote protected prefix and check matching policy and tunnel byte counters.
  3. For the hospital headquarters VPN shows an IKE connection but an deployment: Trace the peer handshake and UDP port negotiation on both sides of the NAT device, then confirm encrypted byte counters advance.
  4. For the hospital headquarters VPN shows an IKE connection but an deployment: Inspect both peers' IKE negotiation logs and confirm a stable phase-one SA after matching supported parameters.

Answer & Explanations

Correct answer: A

A.

Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets. This is the relevant test because even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

B.

This check would help evaluate the distinct objective “Add route and policy for an interface-based IPsec tunnel”, but not the required result. For this case, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

C.

This check would help evaluate the distinct objective “Account for NAT traversal of IKE and IPsec”, but not the required result. For this case, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

D.

This check would help evaluate the distinct objective “Repair mismatched IKE phase-one proposals”, but not the required result. For this case, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

Question 534

A hospital headquarters VPN shows an IKE connection but an added imaging subnet cannot communicate with a remote clinic. Which proposed shortcut would most directly cause application traffic failing because the required protected selector has no working child SA, and therefore must be avoided for this requirement?

  1. For the hospital headquarters VPN shows an IKE connection but an deployment: Assume successful IKE negotiation automatically installs every missing route and allow policy.
  2. For the hospital headquarters VPN shows an IKE connection but an deployment: Treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA.
  3. For the hospital headquarters VPN shows an IKE connection but an deployment: Permit only unencapsulated ESP through an upstream NAT while blocking required UDP negotiation.
  4. For the hospital headquarters VPN shows an IKE connection but an deployment: Widen all application firewall policies when IKE peers disagree about encryption proposals.

Answer & Explanations

Correct answer: B

A.

That shortcut would relate to the distinct objective “Add route and policy for an interface-based IPsec tunnel”, rather than the specific configuration or use described. The unsafe step in this case is to treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA.

B.

Treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA. The proposed shortcut bypasses the needed control: Even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs. The appropriate response is to align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes.

C.

That shortcut would relate to the distinct objective “Account for NAT traversal of IKE and IPsec”, rather than the specific configuration or use described. The unsafe step in this case is to treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA.

D.

That shortcut would relate to the distinct objective “Repair mismatched IKE phase-one proposals”, rather than the specific configuration or use described. The unsafe step in this case is to treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA.

Question 535

A hospital headquarters VPN shows an IKE connection but an added imaging subnet cannot communicate with a remote clinic. Which combined implementation and verification plan most reliably resolves this specific FortiOS 7.6 issue?

  1. For the hospital headquarters VPN shows an IKE connection but an deployment: Implement: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Verify: Verify tunnel interface and route status, send a packet to the remote protected prefix and check matching policy and tunnel byte counters.
  2. For the hospital headquarters VPN shows an IKE connection but an deployment: Implement: Check UDP 500/4500 path and supported NAT traversal settings when an IPsec peer sits behind address translation. Verify: Trace the peer handshake and UDP port negotiation on both sides of the NAT device, then confirm encrypted byte counters advance.
  3. For the hospital headquarters VPN shows an IKE connection but an deployment: Implement: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Verify: Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.
  4. For the hospital headquarters VPN shows an IKE connection but an deployment: Implement: Compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules. Verify: Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

Answer & Explanations

Correct answer: C

A.

This action and check address the alternate operation “For the hospital headquarters VPN shows an IKE connection but an deployment: Implement: Align both peers' protected traffic selectors…” instead of the stated acceptance requirement. The matching action is to align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Its confirming test is to inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

B.

This action and check address the distinct objective “Account for NAT traversal of IKE and IPsec” instead of the stated acceptance requirement. The matching action is to align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Its confirming test is to inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

C.

Implement: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Verify: Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets. This pairing is justified because even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

D.

This action and check address the alternate operation “For the hospital headquarters VPN shows an IKE connection but an deployment: Implement: Compare IKE version, authentication method, proposals…” instead of the stated acceptance requirement. The matching action is to align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Its confirming test is to inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

Question 536

A manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. Which FortiOS 7.6 administrative change best meets this requirement without weakening unrelated controls?

  1. For the manufacturer added deployment: Check UDP 500/4500 path and supported NAT traversal settings when an IPsec peer sits behind address translation.
  2. For the manufacturer added deployment: Compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules.
  3. For the manufacturer added deployment: Configure an interface-based IPsec tunnel with a route and bidirectional firewall policy matching the intended protected networks.
  4. For the manufacturer added deployment: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes.

Answer & Explanations

Correct answer: D

A.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. This option addresses the distinct objective “Account for NAT traversal of IKE and IPsec”, not the immediate requirement. NAT traversal encapsulates ESP in UDP 4500 where negotiated and needed; an intermediary that drops required IKE or UDP-encapsulated traffic can break tunnel establishment or data. For the stated case, even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

B.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. This option addresses the distinct objective “Repair mismatched IKE phase-one proposals”, not the immediate requirement. The IKE phase-one negotiation requires compatible cryptographic and identity settings; a mismatch prevents establishing the security association. For the stated case, even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

C.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. This option addresses the distinct objective “Add route and policy for an interface-based IPsec tunnel”, not the immediate requirement. An established IPsec tunnel alone does not tell FortiOS to forward selected traffic through it or permit that traffic through security policy. For the stated case, even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

D.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. This resolves the issue because even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs. To verify, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

Question 537

A manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. The engineer proposes this change: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes Which explanation most accurately establishes why that change meets the operational requirement?

  1. For the manufacturer added deployment: Even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.
  2. For the manufacturer added deployment: NAT traversal encapsulates ESP in UDP 4500 where negotiated and needed; an intermediary that drops required IKE or UDP-encapsulated traffic can break tunnel establishment or data.
  3. For the manufacturer added deployment: The IKE phase-one negotiation requires compatible cryptographic and identity settings; a mismatch prevents establishing the security association.
  4. For the manufacturer added deployment: An established IPsec tunnel alone does not tell FortiOS to forward selected traffic through it or permit that traffic through security policy.

Answer & Explanations

Correct answer: A

A.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. Even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs. It supports this action: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. To confirm, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

B.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. That statement explains the distinct objective “Account for NAT traversal of IKE and IPsec” rather than the cause in this case. The deciding mechanism here is that even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

C.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. That statement explains the distinct objective “Repair mismatched IKE phase-one proposals” rather than the cause in this case. The deciding mechanism here is that even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

D.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. That statement explains the distinct objective “Add route and policy for an interface-based IPsec tunnel” rather than the cause in this case. The deciding mechanism here is that even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

Question 538

A manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. After implementing this change—Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes—which test best establishes that the intended outcome is actually working?

  1. For the manufacturer added deployment: Trace the peer handshake and UDP port negotiation on both sides of the NAT device, then confirm encrypted byte counters advance.
  2. For the manufacturer added deployment: Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.
  3. For the manufacturer added deployment: Inspect both peers' IKE negotiation logs and confirm a stable phase-one SA after matching supported parameters.
  4. For the manufacturer added deployment: Verify tunnel interface and route status, send a packet to the remote protected prefix and check matching policy and tunnel byte counters.

Answer & Explanations

Correct answer: B

A.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. This check would help evaluate the distinct objective “Account for NAT traversal of IKE and IPsec”, but not the required result. For this case, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

B.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets. This is the relevant test because even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

C.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. This check would help evaluate the distinct objective “Repair mismatched IKE phase-one proposals”, but not the required result. For this case, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

D.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. This check would help evaluate the distinct objective “Add route and policy for an interface-based IPsec tunnel”, but not the required result. For this case, inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

Question 539

A manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. Which proposed shortcut would most directly cause application traffic failing because the required protected selector has no working child SA, and therefore must be avoided for this requirement?

  1. For the manufacturer added deployment: Permit only unencapsulated ESP through an upstream NAT while blocking required UDP negotiation.
  2. For the manufacturer added deployment: Widen all application firewall policies when IKE peers disagree about encryption proposals.
  3. For the manufacturer added deployment: Treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA.
  4. For the manufacturer added deployment: Assume successful IKE negotiation automatically installs every missing route and allow policy.

Answer & Explanations

Correct answer: C

A.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. That shortcut would relate to the distinct objective “Account for NAT traversal of IKE and IPsec”, rather than the specific configuration or use described. The unsafe step in this case is to treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA.

B.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. That shortcut would relate to the distinct objective “Repair mismatched IKE phase-one proposals”, rather than the specific configuration or use described. The unsafe step in this case is to treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA.

C.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. Treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA. The proposed shortcut bypasses the needed control: Even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs. The appropriate response is to align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes.

D.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. That shortcut would relate to the distinct objective “Add route and policy for an interface-based IPsec tunnel”, rather than the specific configuration or use described. The unsafe step in this case is to treat a green phase-one status icon as proof that every protected subnet has an established phase-two SA.

Question 540

A manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. Which combined implementation and verification plan most reliably resolves this specific FortiOS 7.6 issue?

  1. For the manufacturer added deployment: Implement: Compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints before changing unrelated firewall rules. Verify: Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.
  2. For the manufacturer added deployment: Implement: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Verify: Verify tunnel interface and route status, send a packet to the remote protected prefix and check matching policy and tunnel byte counters.
  3. For the manufacturer added deployment: Implement: Check UDP 500/4500 path and supported NAT traversal settings when an IPsec peer sits behind address translation. Verify: Trace the peer handshake and UDP port negotiation on both sides of the NAT device, then confirm encrypted byte counters advance.
  4. For the manufacturer added deployment: Implement: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Verify: Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

Answer & Explanations

Correct answer: D

A.

This action and check address the alternate operation “For the manufacturer added deployment: Implement: Compare IKE version, authentication method, proposals and peer addresses at both IPsec endpoints…” instead of the stated acceptance requirement. The matching action is to align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Its confirming test is to inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

B.

This action and check address the alternate operation “For the manufacturer added deployment: Implement: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site…” instead of the stated acceptance requirement. The matching action is to align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Its confirming test is to inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

C.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. This action and check address the distinct objective “Account for NAT traversal of IKE and IPsec” instead of the stated acceptance requirement. The matching action is to align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Its confirming test is to inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets.

D.

The situation is that a manufacturer added an extra production VLAN to one peer's IPsec settings but phase two fails for that VLAN. Implement: Align both peers' protected traffic selectors and phase-two proposals for the intended site-to-site prefixes. Verify: Inspect phase-two negotiations, child SA selectors and byte counters while sending a controlled packet between the protected subnets. This pairing is justified because even with successful IKE phase one, incompatible phase-two selectors or transform proposals can prevent establishing usable IPsec child SAs.

FCP - FortiGate 7.6 Administrator (FCP_FGT_AD-7.6) Practice Tests