Practice Exams:

Fortinet FCP_FGT_AD-7.6 Dumps

EXAM: FCP - FortiGate 7.6 Administrator
Verified By Experts
Premium Bundle
$49.99

FCP_FGT_AD-7.6 Premium ETE File


  • Premium File 128 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Fortinet FCP_FGT_AD-7.6 Practice Test 52

Question 510

A public safety communications team is ranking two circuits for interactive dispatch radio gateways. Which combined implementation and verification plan most reliably resolves this specific FortiOS 7.6 issue?

  1. For the public safety communications team deployment: Implement: Define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone. Verify: Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.
  2. For the public safety communications team deployment: Implement: Define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone. Verify: Inject controlled jitter or loss on one WAN and verify the member's SLA violation and a new session's steering decision.
  3. For the public safety communications team deployment: Implement: Configure SD-WAN performance SLA probes that use relevant reachable targets over the intended member paths. Verify: Degrade one test link and confirm SLA status, measured loss or latency, and selected member changes in diagnostics.
  4. For the public safety communications team deployment: Implement: Define specific SD-WAN service rules for critical applications ahead of less-specific catchall steering rules. Verify: Inject controlled jitter or loss on one WAN and verify the member's SLA violation and a new session's steering decision.

Answer & Explanations

Correct answer: B

A.

This action and check address the alternate operation “For the public safety communications team deployment: Implement: Define performance SLA thresholds appropriate to the critical application's sensitivity rather…” instead of the stated acceptance requirement. The matching action is to define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone. Its confirming test is to inject controlled jitter or loss on one WAN and verify the member's SLA violation and a new session's steering decision.

B.

The situation is that a public safety communications team is ranking two circuits for interactive dispatch radio gateways. Implement: Define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone. Verify: Inject controlled jitter or loss on one WAN and verify the member's SLA violation and a new session's steering decision. This pairing is justified because a fast link can still violate real-time application needs through jitter or loss; SD-WAN can use measured SLA quality to select a better eligible member.

C.

The situation is that a public safety communications team is ranking two circuits for interactive dispatch radio gateways. This action and check address the distinct objective “Measure SD-WAN member health with appropriate probes” instead of the stated acceptance requirement. The matching action is to define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone. Its confirming test is to inject controlled jitter or loss on one WAN and verify the member's SLA violation and a new session's steering decision.

D.

This action and check address the alternate operation “For the public safety communications team deployment: Implement: Define specific SD-WAN service rules for critical applications ahead of less-specific…” instead of the stated acceptance requirement. The matching action is to define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone. Its confirming test is to inject controlled jitter or loss on one WAN and verify the member's SLA violation and a new session's steering decision.

Question 511

A food distributor added a backup ISP to SD-WAN but office clients still cannot fail over to it. Which FortiOS 7.6 administrative change best meets this requirement without weakening unrelated controls?

  1. For the food distributor deployment: Define specific SD-WAN service rules for critical applications ahead of less-specific catchall steering rules.
  2. For the food distributor deployment: Configure SD-WAN performance SLA probes that use relevant reachable targets over the intended member paths.
  3. For the food distributor deployment: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces.
  4. For the food distributor deployment: Define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone.

Answer & Explanations

Correct answer: C

A.

This option addresses the distinct objective “Order SD-WAN service rules to meet application intent”, not the immediate requirement. SD-WAN service rule evaluation and member selection depend on configured matching criteria and strategy; broad early rules can shadow specific application steering. For the stated case, an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

B.

This option addresses the distinct objective “Measure SD-WAN member health with appropriate probes”, not the immediate requirement. Performance SLA checks supply latency, jitter, loss and reachability data used by qualifying SD-WAN decisions; irrelevant probe destinations can misrepresent application path health. For the stated case, an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

C.

Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. This resolves the issue because an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass. To verify, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

D.

This option addresses the distinct objective “Use latency, jitter and loss thresholds for application steering”, not the immediate requirement. A fast link can still violate real-time application needs through jitter or loss; SD-WAN can use measured SLA quality to select a better eligible member. For the stated case, an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

Question 512

A food distributor added a backup ISP to SD-WAN but office clients still cannot fail over to it. The engineer proposes this change: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces Which explanation most accurately establishes why that change meets the operational requirement?

  1. For the food distributor deployment: Performance SLA checks supply latency, jitter, loss and reachability data used by qualifying SD-WAN decisions; irrelevant probe destinations can misrepresent application path health.
  2. For the food distributor deployment: A fast link can still violate real-time application needs through jitter or loss; SD-WAN can use measured SLA quality to select a better eligible member.
  3. For the food distributor deployment: SD-WAN service rule evaluation and member selection depend on configured matching criteria and strategy; broad early rules can shadow specific application steering.
  4. For the food distributor deployment: An SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

Answer & Explanations

Correct answer: D

A.

That statement explains the distinct objective “Measure SD-WAN member health with appropriate probes” rather than the cause in this case. The deciding mechanism here is that an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

B.

That statement explains the distinct objective “Use latency, jitter and loss thresholds for application steering” rather than the cause in this case. The deciding mechanism here is that an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

C.

That statement explains the distinct objective “Order SD-WAN service rules to meet application intent” rather than the cause in this case. The deciding mechanism here is that an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

D.

An SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass. It supports this action: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. To confirm, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

Question 513

A food distributor added a backup ISP to SD-WAN but office clients still cannot fail over to it. After implementing this change—Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces—which test best establishes that the intended outcome is actually working?

  1. For the food distributor deployment: Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.
  2. For the food distributor deployment: Degrade one test link and confirm SLA status, measured loss or latency, and selected member changes in diagnostics.
  3. For the food distributor deployment: Inject controlled jitter or loss on one WAN and verify the member's SLA violation and a new session's steering decision.
  4. For the food distributor deployment: Generate critical and general test flows, then inspect matching SD-WAN service IDs and chosen members under each path's measured health.

Answer & Explanations

Correct answer: A

A.

Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet. This is the relevant test because an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

B.

This check would help evaluate the distinct objective “Measure SD-WAN member health with appropriate probes”, but not the required result. For this case, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

C.

This check would help evaluate the distinct objective “Use latency, jitter and loss thresholds for application steering”, but not the required result. For this case, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

D.

This check would help evaluate the distinct objective “Order SD-WAN service rules to meet application intent”, but not the required result. For this case, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

Question 514

A food distributor added a backup ISP to SD-WAN but office clients still cannot fail over to it. Which proposed shortcut would most directly cause correct link health with sessions denied or misrouted by stale interface policy, and therefore must be avoided for this requirement?

  1. For the food distributor deployment: Mark a WAN healthy based only on physical link-up while its end-to-end path drops application packets.
  2. For the food distributor deployment: Add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface.
  3. For the food distributor deployment: Choose an ISP solely by advertised bandwidth while ignoring packet loss for interactive traffic.
  4. For the food distributor deployment: Place a catchall service rule before a critical-application rule and assume the later rule wins.

Answer & Explanations

Correct answer: B

A.

That shortcut would relate to the distinct objective “Measure SD-WAN member health with appropriate probes”, rather than the specific configuration or use described. The unsafe step in this case is to add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface.

B.

Add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface. The proposed shortcut bypasses the needed control: An SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass. The appropriate response is to check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces.

C.

That shortcut would relate to the distinct objective “Use latency, jitter and loss thresholds for application steering”, rather than the specific configuration or use described. The unsafe step in this case is to add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface.

D.

That shortcut would relate to the distinct objective “Order SD-WAN service rules to meet application intent”, rather than the specific configuration or use described. The unsafe step in this case is to add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface.

Question 515

A food distributor added a backup ISP to SD-WAN but office clients still cannot fail over to it. Which combined implementation and verification plan most reliably resolves this specific FortiOS 7.6 issue?

  1. For the food distributor deployment: Implement: Configure SD-WAN performance SLA probes that use relevant reachable targets over the intended member paths. Verify: Degrade one test link and confirm SLA status, measured loss or latency, and selected member changes in diagnostics.
  2. For the food distributor deployment: Implement: Define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone. Verify: Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.
  3. For the food distributor deployment: Implement: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Verify: Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.
  4. For the food distributor deployment: Implement: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Verify: Generate critical and general test flows, then inspect matching SD-WAN service IDs and chosen members under each path's measured health.

Answer & Explanations

Correct answer: C

A.

This action and check address the distinct objective “Measure SD-WAN member health with appropriate probes” instead of the stated acceptance requirement. The matching action is to check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Its confirming test is to inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

B.

This action and check address the alternate operation “For the food distributor deployment: Implement: Define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying…” instead of the stated acceptance requirement. The matching action is to check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Its confirming test is to inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

C.

Implement: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Verify: Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet. This pairing is justified because an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

D.

This action and check address the alternate operation “For the food distributor deployment: Implement: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit…” instead of the stated acceptance requirement. The matching action is to check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Its confirming test is to inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

Question 516

A small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. Which FortiOS 7.6 administrative change best meets this requirement without weakening unrelated controls?

  1. For the small bank deployment: Define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone.
  2. For the small bank deployment: Define specific SD-WAN service rules for critical applications ahead of less-specific catchall steering rules.
  3. For the small bank deployment: Configure SD-WAN performance SLA probes that use relevant reachable targets over the intended member paths.
  4. For the small bank deployment: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces.

Answer & Explanations

Correct answer: D

A.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. This option addresses the distinct objective “Use latency, jitter and loss thresholds for application steering”, not the immediate requirement. A fast link can still violate real-time application needs through jitter or loss; SD-WAN can use measured SLA quality to select a better eligible member. For the stated case, an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

B.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. This option addresses the distinct objective “Order SD-WAN service rules to meet application intent”, not the immediate requirement. SD-WAN service rule evaluation and member selection depend on configured matching criteria and strategy; broad early rules can shadow specific application steering. For the stated case, an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

C.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. This option addresses the distinct objective “Measure SD-WAN member health with appropriate probes”, not the immediate requirement. Performance SLA checks supply latency, jitter, loss and reachability data used by qualifying SD-WAN decisions; irrelevant probe destinations can misrepresent application path health. For the stated case, an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

D.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. This resolves the issue because an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass. To verify, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

Question 517

A small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. The engineer proposes this change: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces Which explanation most accurately establishes why that change meets the operational requirement?

  1. For the small bank deployment: An SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.
  2. For the small bank deployment: A fast link can still violate real-time application needs through jitter or loss; SD-WAN can use measured SLA quality to select a better eligible member.
  3. For the small bank deployment: SD-WAN service rule evaluation and member selection depend on configured matching criteria and strategy; broad early rules can shadow specific application steering.
  4. For the small bank deployment: Performance SLA checks supply latency, jitter, loss and reachability data used by qualifying SD-WAN decisions; irrelevant probe destinations can misrepresent application path health.

Answer & Explanations

Correct answer: A

A.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. An SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass. It supports this action: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. To confirm, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

B.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. That statement explains the distinct objective “Use latency, jitter and loss thresholds for application steering” rather than the cause in this case. The deciding mechanism here is that an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

C.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. That statement explains the distinct objective “Order SD-WAN service rules to meet application intent” rather than the cause in this case. The deciding mechanism here is that an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

D.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. That statement explains the distinct objective “Measure SD-WAN member health with appropriate probes” rather than the cause in this case. The deciding mechanism here is that an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

Question 518

A small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. After implementing this change—Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces—which test best establishes that the intended outcome is actually working?

  1. For the small bank deployment: Inject controlled jitter or loss on one WAN and verify the member's SLA violation and a new session's steering decision.
  2. For the small bank deployment: Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.
  3. For the small bank deployment: Generate critical and general test flows, then inspect matching SD-WAN service IDs and chosen members under each path's measured health.
  4. For the small bank deployment: Degrade one test link and confirm SLA status, measured loss or latency, and selected member changes in diagnostics.

Answer & Explanations

Correct answer: B

A.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. This check would help evaluate the distinct objective “Use latency, jitter and loss thresholds for application steering”, but not the required result. For this case, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

B.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet. This is the relevant test because an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

C.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. This check would help evaluate the distinct objective “Order SD-WAN service rules to meet application intent”, but not the required result. For this case, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

D.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. This check would help evaluate the distinct objective “Measure SD-WAN member health with appropriate probes”, but not the required result. For this case, inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

Question 519

A small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. Which proposed shortcut would most directly cause correct link health with sessions denied or misrouted by stale interface policy, and therefore must be avoided for this requirement?

  1. For the small bank deployment: Choose an ISP solely by advertised bandwidth while ignoring packet loss for interactive traffic.
  2. For the small bank deployment: Place a catchall service rule before a critical-application rule and assume the later rule wins.
  3. For the small bank deployment: Add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface.
  4. For the small bank deployment: Mark a WAN healthy based only on physical link-up while its end-to-end path drops application packets.

Answer & Explanations

Correct answer: C

A.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. That shortcut would relate to the distinct objective “Use latency, jitter and loss thresholds for application steering”, rather than the specific configuration or use described. The unsafe step in this case is to add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface.

B.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. That shortcut would relate to the distinct objective “Order SD-WAN service rules to meet application intent”, rather than the specific configuration or use described. The unsafe step in this case is to add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface.

C.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. Add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface. The proposed shortcut bypasses the needed control: An SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass. The appropriate response is to check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces.

D.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. That shortcut would relate to the distinct objective “Measure SD-WAN member health with appropriate probes”, rather than the specific configuration or use described. The unsafe step in this case is to add a link as an SD-WAN member but leave the traffic policy pointed only at an unrelated legacy WAN interface.

Question 520

A small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. Which combined implementation and verification plan most reliably resolves this specific FortiOS 7.6 issue?

  1. For the small bank deployment: Implement: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Verify: Generate critical and general test flows, then inspect matching SD-WAN service IDs and chosen members under each path's measured health.
  2. For the small bank deployment: Implement: Configure SD-WAN performance SLA probes that use relevant reachable targets over the intended member paths. Verify: Degrade one test link and confirm SLA status, measured loss or latency, and selected member changes in diagnostics.
  3. For the small bank deployment: Implement: Define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying on throughput alone. Verify: Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.
  4. For the small bank deployment: Implement: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Verify: Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

Answer & Explanations

Correct answer: D

A.

This action and check address the alternate operation “For the small bank deployment: Implement: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit…” instead of the stated acceptance requirement. The matching action is to check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Its confirming test is to inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

B.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. This action and check address the distinct objective “Measure SD-WAN member health with appropriate probes” instead of the stated acceptance requirement. The matching action is to check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Its confirming test is to inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

C.

This action and check address the alternate operation “For the small bank deployment: Implement: Define performance SLA thresholds appropriate to the critical application's sensitivity rather than relying…” instead of the stated acceptance requirement. The matching action is to check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Its confirming test is to inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet.

D.

The situation is that a small bank moved two physical WAN links into one SD-WAN zone and must update policies before removing old route settings. Implement: Check SD-WAN zone membership, routing toward the zone and firewall policies that permit traffic across the selected interfaces. Verify: Inspect the selected SD-WAN member and route, then verify the matching permit policy and a successful return packet. This pairing is justified because an SD-WAN member decision does not bypass the firewall policy engine; routes and policies must reference the intended zone or interfaces for the flow to pass.

FCP - FortiGate 7.6 Administrator (FCP_FGT_AD-7.6) Practice Tests