Practice Exams:

Cisco 400-007 Dumps

EXAM: Cisco Certified Design Expert
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

400-007 Premium Bundle


  • Premium File 349 Questions & Answers
  • Study Guide 934 Pages

Cisco 400-007 Practice Test 34

Question 330

A network design team is assessing this customer situation: Two cloud egress peers receive identical destinations but regulated traffic must prefer a private path. Out-of-hours operations staff cannot perform manual changes at every remote site. Which technical rationale best explains the proposed design choice under these constraints?

  1. IS-IS hierarchy can keep detailed local topology from burdening the backbone while preserving needed reachability
  2. BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent
  3. Business expansion changes administrative domains, latency demands and allowed traffic paths
  4. Smaller broadcast domains and loop controls constrain accidental Layer 2 topology changes

Answer & Explanations

Correct answer: B

A.

The alternative principle is: IS-IS hierarchy can keep detailed local topology from burdening the backbone while preserving needed reachability. It instead explains this action: Use L1/L2 boundaries and leak only policy-approved interlevel routes. For the present requirement, the controlling mechanism is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

B.

BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent. This explains the action: Implement documented local preference and community policy at controlled BGP boundaries. For the described facts—Two cloud egress peers receive identical destinations but regulated traffic must prefer a private path—test the outcome through: Route tests show each classified prefix chooses the intended next hop before and after peer failure.

C.

The alternative principle is: Business expansion changes administrative domains, latency demands and allowed traffic paths. It instead explains this action: Define regional route, policy and service boundaries from business geography and data constraints. For the present requirement, the controlling mechanism is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

D.

The alternative principle is: Smaller broadcast domains and loop controls constrain accidental Layer 2 topology changes. It instead explains this action: Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards. For the present requirement, the controlling mechanism is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

Question 331

A network design team is assessing this customer situation: Two cloud egress peers receive identical destinations but regulated traffic must prefer a private path. Out-of-hours operations staff cannot perform manual changes at every remote site. Which failure is the most direct risk of taking the tempting design shortcut?

  1. Sensitive traffic can violate contractual or regulatory boundaries during recovery
  2. A single control-plane fault can suppress route visibility across unrelated regions
  3. Traffic may exit through an unapproved path despite apparently healthy route adjacencies
  4. Packets can follow an apparently valid summary into a failed network segment

Answer & Explanations

Correct answer: C

A.

The offered consequence belongs to the alternative control path: Translate data classification and service ownership into explicit path and segmentation policy. The relevant failure for the current situation is: Traffic may exit through an unapproved path despite apparently healthy route adjacencies. The distinction follows from: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

B.

The offered consequence belongs to the alternative control path: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. The relevant failure for the current situation is: Traffic may exit through an unapproved path despite apparently healthy route adjacencies. The distinction follows from: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

C.

Traffic may exit through an unapproved path despite apparently healthy route adjacencies. That is the risk in the reported situation—Two cloud egress peers receive identical destinations but regulated traffic must prefer a private path. The corrective action is: Implement documented local preference and community policy at controlled BGP boundaries. Technical basis: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

D.

The offered consequence belongs to the alternative control path: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. The relevant failure for the current situation is: Traffic may exit through an unapproved path despite apparently healthy route adjacencies. The distinction follows from: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

Question 332

A network design team is assessing this customer situation: Two cloud egress peers receive identical destinations but regulated traffic must prefer a private path. Out-of-hours operations staff cannot perform manual changes at every remote site. Which prerequisite should the architect confirm before choosing and defending this design?

  1. Inventory LSA count, ABR redundancy, summarization assumptions and failure-path needs
  2. Catalog prefix ownership, redistribution points, tags and route preference rules
  3. Gather planned site count, data movement restrictions, service dependencies and carrier availability
  4. Define traffic classes, upstream policy, local preference scope and failover requirements

Answer & Explanations

Correct answer: D

A.

The offered preparation belongs with the alternative action: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. Here the necessary starting condition is: Define traffic classes, upstream policy, local preference scope and failover requirements. It supports: Implement documented local preference and community policy at controlled BGP boundaries.

B.

The offered preparation belongs with the alternative action: Bound redistribution to explicit prefixes and tags, preventing reintroduction of learned routes. Here the necessary starting condition is: Define traffic classes, upstream policy, local preference scope and failover requirements. It supports: Implement documented local preference and community policy at controlled BGP boundaries.

C.

The offered preparation belongs with the alternative action: Define regional route, policy and service boundaries from business geography and data constraints. Here the necessary starting condition is: Define traffic classes, upstream policy, local preference scope and failover requirements. It supports: Implement documented local preference and community policy at controlled BGP boundaries.

D.

The necessary starting condition is: Define traffic classes, upstream policy, local preference scope and failover requirements. This enables the action: Implement documented local preference and community policy at controlled BGP boundaries. Validate the result with: Route tests show each classified prefix chooses the intended next hop before and after peer failure.

Question 333

In a separate customer architecture review, this issue arises: A multinational uses several upstreams and requires explicit outbound traffic preference per region. The network is in an incremental migration with old and new paths both active. Which high-level network design choice most directly meets the stated technical and operational requirement?

  1. Implement documented local preference and community policy at controlled BGP boundaries
  2. Create area boundaries and resilient ABRs that localize topology changes without isolating reachability
  3. Translate business service tiers into differentiated routing, QoS and failover acceptance criteria
  4. Translate data classification and service ownership into explicit path and segmentation policy

Answer & Explanations

Correct answer: A

A.

BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent. For the documented situation—A multinational uses several upstreams and requires explicit outbound traffic preference per region—the targeted response is: Implement documented local preference and community policy at controlled BGP boundaries. Check: Route tests show each classified prefix chooses the intended next hop before and after peer failure.

B.

OSPF flooding domains and summary design affect CPU load, SPF frequency and fault propagation. That supports the alternative intervention: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. The present situation—A multinational uses several upstreams and requires explicit outbound traffic preference per region—instead calls for: Implement documented local preference and community policy at controlled BGP boundaries. Technical basis: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

C.

The alternative addresses: Translate business service tiers into differentiated routing, QoS and failover acceptance criteria. Its principle is: Network resource scarcity should preserve the most consequential workflows, not simply equal-share traffic. In this case the needed action is: Implement documented local preference and community policy at controlled BGP boundaries. Confirm by: Route tests show each classified prefix chooses the intended next hop before and after peer failure.

D.

The alternative addresses a different technical concern: Reachability should reflect differentiated business constraints, not a single cheapest route for all traffic. The governing mechanism here is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent. Accordingly, use: Implement documented local preference and community policy at controlled BGP boundaries.

Question 334

In a separate customer architecture review, this issue arises: A multinational uses several upstreams and requires explicit outbound traffic preference per region. The network is in an incremental migration with old and new paths both active. Which technical rationale best explains the proposed design choice under these constraints?

  1. Network resource scarcity should preserve the most consequential workflows, not simply equal-share traffic
  2. BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent
  3. Route tags and constrained policy prevent loops when the same prefix traverses multiple protocol domains
  4. Smaller broadcast domains and loop controls constrain accidental Layer 2 topology changes

Answer & Explanations

Correct answer: B

A.

The alternative principle is: Network resource scarcity should preserve the most consequential workflows, not simply equal-share traffic. It instead explains this action: Translate business service tiers into differentiated routing, QoS and failover acceptance criteria. For the present requirement, the controlling mechanism is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

B.

BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent. This explains the action: Implement documented local preference and community policy at controlled BGP boundaries. For the described facts—A multinational uses several upstreams and requires explicit outbound traffic preference per region—test the outcome through: Route tests show each classified prefix chooses the intended next hop before and after peer failure.

C.

The alternative principle is: Route tags and constrained policy prevent loops when the same prefix traverses multiple protocol domains. It instead explains this action: Bound redistribution to explicit prefixes and tags, preventing reintroduction of learned routes. For the present requirement, the controlling mechanism is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

D.

The alternative principle is: Smaller broadcast domains and loop controls constrain accidental Layer 2 topology changes. It instead explains this action: Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards. For the present requirement, the controlling mechanism is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent. The scenario is: A multinational uses several upstreams and requires explicit outbound traffic preference per region.

Question 335

In a separate customer architecture review, this issue arises: A multinational uses several upstreams and requires explicit outbound traffic preference per region. The network is in an incremental migration with old and new paths both active. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?

  1. A branch link-flap test limits LSA churn to its intended domain while regional routes remain valid
  2. A new-region pilot meets localization rules and critical app latency without changing existing-region contracts
  3. Route tests show each classified prefix chooses the intended next hop before and after peer failure
  4. A lab-induced access loop is contained to its edge segment while routed services remain reachable

Answer & Explanations

Correct answer: C

A.

The offered observation would test: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. It would not establish that the stated requirement has been met. The direct evidence needed here is: Route tests show each classified prefix chooses the intended next hop before and after peer failure.

B.

The offered observation would test: Define regional route, policy and service boundaries from business geography and data constraints. It would not establish that the stated requirement has been met. The direct evidence needed here is: Route tests show each classified prefix chooses the intended next hop before and after peer failure.

C.

Direct verification: Route tests show each classified prefix chooses the intended next hop before and after peer failure. This is the relevant evidence for the action: Implement documented local preference and community policy at controlled BGP boundaries. The reason is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.

D.

The offered observation would test: Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards. It would not establish that the stated requirement has been met. The direct evidence needed here is: Route tests show each classified prefix chooses the intended next hop before and after peer failure.

Question 336

In a separate customer architecture review, this issue arises: A multinational uses several upstreams and requires explicit outbound traffic preference per region. The network is in an incremental migration with old and new paths both active. Which prerequisite should the architect confirm before choosing and defending this design?

  1. Assess L1/L2 connectivity, leaking policy, default routing behavior and dual-stack support
  2. Map site ownership, aggregate reachability, return paths and route-withdrawal behavior
  3. Gather planned site count, data movement restrictions, service dependencies and carrier availability
  4. Define traffic classes, upstream policy, local preference scope and failover requirements

Answer & Explanations

Correct answer: D

A.

The offered preparation belongs with the alternative action: Use L1/L2 boundaries and leak only policy-approved interlevel routes. Here the necessary starting condition is: Define traffic classes, upstream policy, local preference scope and failover requirements. It supports: Implement documented local preference and community policy at controlled BGP boundaries.

B.

The offered preparation belongs with the alternative action: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. Here the necessary starting condition is: Define traffic classes, upstream policy, local preference scope and failover requirements. It supports: Implement documented local preference and community policy at controlled BGP boundaries.

C.

The offered preparation belongs with the alternative action: Define regional route, policy and service boundaries from business geography and data constraints. Here the necessary starting condition is: Define traffic classes, upstream policy, local preference scope and failover requirements. It supports: Implement documented local preference and community policy at controlled BGP boundaries. The scenario is: A multinational uses several upstreams and requires explicit outbound traffic preference per region.

D.

The necessary starting condition is: Define traffic classes, upstream policy, local preference scope and failover requirements. This enables the action: Implement documented local preference and community policy at controlled BGP boundaries. Validate the result with: Route tests show each classified prefix chooses the intended next hop before and after peer failure. The scenario is: A multinational uses several upstreams and requires explicit outbound traffic preference per region.

Question 337

A network design team is assessing this customer situation: A campus backbone advertises thousands of component routes and faces scalability limits. The customer requires clear acceptance tests before a new contract is signed. Which high-level network design choice most directly meets the stated technical and operational requirement?

  1. Summarize at stable boundaries while retaining explicitly required more-specific exceptions
  2. Use L1/L2 boundaries and leak only policy-approved interlevel routes
  3. Partition modules by failure, ownership and change cadence with carefully designed routed boundaries
  4. Translate data classification and service ownership into explicit path and segmentation policy

Answer & Explanations

Correct answer: A

A.

Summarize at stable boundaries while retaining explicitly required more-specific exceptions. The relevant technical reason is: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path. Confirm through: A simulated component failure uses the required exception route and prevents forwarding into a summary black hole.

B.

The alternative addresses: Use L1/L2 boundaries and leak only policy-approved interlevel routes. Its principle is: IS-IS hierarchy can keep detailed local topology from burdening the backbone while preserving needed reachability. In this case the needed action is: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. Confirm by: A simulated component failure uses the required exception route and prevents forwarding into a summary black hole.

C.

The alternative addresses a different technical concern: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity. The governing mechanism here is: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path. Accordingly, use: Summarize at stable boundaries while retaining explicitly required more-specific exceptions.

D.

Reachability should reflect differentiated business constraints, not a single cheapest route for all traffic. That supports the alternative intervention: Translate data classification and service ownership into explicit path and segmentation policy. The present situation—A campus backbone advertises thousands of component routes and faces scalability limits—instead calls for: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. Technical basis: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path.

Question 338

A network design team is assessing this customer situation: A campus backbone advertises thousands of component routes and faces scalability limits. The customer requires clear acceptance tests before a new contract is signed. Which technical rationale best explains the proposed design choice under these constraints?

  1. Modularity limits correlated operational impact without eliminating necessary inter-module connectivity
  2. Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path
  3. Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience
  4. Route tags and constrained policy prevent loops when the same prefix traverses multiple protocol domains

Answer & Explanations

Correct answer: B

A.

The alternative principle is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity. It instead explains this action: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. For the present requirement, the controlling mechanism is: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path.

B.

Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path. This explains the action: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. For the described facts—A campus backbone advertises thousands of component routes and faces scalability limits—test the outcome through: A simulated component failure uses the required exception route and prevents forwarding into a summary black hole.

C.

The alternative principle is: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience. It instead explains this action: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. For the present requirement, the controlling mechanism is: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path.

D.

The alternative principle is: Route tags and constrained policy prevent loops when the same prefix traverses multiple protocol domains. It instead explains this action: Bound redistribution to explicit prefixes and tags, preventing reintroduction of learned routes. For the present requirement, the controlling mechanism is: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path.

Question 339

A network design team is assessing this customer situation: A campus backbone advertises thousands of component routes and faces scalability limits. The customer requires clear acceptance tests before a new contract is signed. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?

  1. Route tests show each classified prefix chooses the intended next hop before and after peer failure
  2. A lab-induced access loop is contained to its edge segment while routed services remain reachable
  3. A simulated component failure uses the required exception route and prevents forwarding into a summary black hole
  4. A simulated access churn changes local LSPs without exhausting backbone routing state

Answer & Explanations

Correct answer: C

A.

The offered observation would test: Implement documented local preference and community policy at controlled BGP boundaries. It would not establish that the stated requirement has been met. The direct evidence needed here is: A simulated component failure uses the required exception route and prevents forwarding into a summary black hole.

B.

The offered observation would test: Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards. It would not establish that the stated requirement has been met. The direct evidence needed here is: A simulated component failure uses the required exception route and prevents forwarding into a summary black hole.

C.

Direct verification: A simulated component failure uses the required exception route and prevents forwarding into a summary black hole. This is the relevant evidence for the action: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. The reason is: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path.

D.

The offered observation would test: Use L1/L2 boundaries and leak only policy-approved interlevel routes. It would not establish that the stated requirement has been met. The direct evidence needed here is: A simulated component failure uses the required exception route and prevents forwarding into a summary black hole.

Question 340

A network design team is assessing this customer situation: A campus backbone advertises thousands of component routes and faces scalability limits. The customer requires clear acceptance tests before a new contract is signed. Which failure is the most direct risk of taking the tempting design shortcut?

  1. Compliance and latency failures emerge as the business footprint grows
  2. Frequent access events can trigger unnecessary network-wide SPF recalculations
  3. A single control-plane fault can suppress route visibility across unrelated regions
  4. Packets can follow an apparently valid summary into a failed network segment

Answer & Explanations

Correct answer: D

A.

The offered consequence belongs to the alternative control path: Define regional route, policy and service boundaries from business geography and data constraints. The relevant failure for the current situation is: Packets can follow an apparently valid summary into a failed network segment. The distinction follows from: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path.

B.

The offered consequence belongs to the alternative control path: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. The relevant failure for the current situation is: Packets can follow an apparently valid summary into a failed network segment. The distinction follows from: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path.

C.

The offered consequence belongs to the alternative control path: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. The relevant failure for the current situation is: Packets can follow an apparently valid summary into a failed network segment. The distinction follows from: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path.

D.

Packets can follow an apparently valid summary into a failed network segment. That is the risk in the reported situation—A campus backbone advertises thousands of component routes and faces scalability limits. The corrective action is: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. Technical basis: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path.

Cisco Certified Design Expert (400-007) Practice Tests