Cisco 400-007 Dumps
Cisco 400-007 Practice Test 33
Question 320
In a separate customer architecture review, this issue arises: A multinational's SD-WAN application policy directs nearby SaaS traffic through a centralized data center. Service ownership is divided between cloud, network, and application teams. Which failure is the most direct risk of taking the tempting design shortcut?
Answer & Explanations
Correct answer: D
The offered consequence belongs to the alternative control path: Require stable confidence, blast-radius guardrails and reversible actions before automated optimization. The relevant failure for the current situation is: Cloud application experience degrades and hub demand grows despite local Internet capacity. The distinction follows from: Application-aware path selection can reduce detours, provided security controls stay equivalent on alternate egress.
The offered consequence belongs to the alternative control path: Measure the full user transaction across DNS, authentication, network and application stages. The relevant failure for the current situation is: Cloud application experience degrades and hub demand grows despite local Internet capacity. The distinction follows from: Application-aware path selection can reduce detours, provided security controls stay equivalent on alternate egress.
The offered consequence belongs to the alternative control path: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. The relevant failure for the current situation is: Cloud application experience degrades and hub demand grows despite local Internet capacity. The distinction follows from: Application-aware path selection can reduce detours, provided security controls stay equivalent on alternate egress.
Cloud application experience degrades and hub demand grows despite local Internet capacity. That is the risk in the reported situation—A multinational's SD-WAN application policy directs nearby SaaS traffic through a centralized data center. The corrective action is: Use policy-controlled local SaaS breakout with identity and security enforcement near the branch. Technical basis: Application-aware path selection can reduce detours, provided security controls stay equivalent on alternate egress.
Question 321
A network design team is assessing this customer situation: An enterprise iBGP full mesh grows beyond maintainable peer counts across six regional clusters. Audit evidence must be retained separately from the devices under change. Which technical rationale best explains the proposed design choice under these constraints?
Answer & Explanations
Correct answer: A
Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience. This explains the action: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. For the described facts—An enterprise iBGP full mesh grows beyond maintainable peer counts across six regional clusters—test the outcome through: A reflector outage preserves path propagation through the surviving design without unexpected route loss.
The alternative principle is: Network resource scarcity should preserve the most consequential workflows, not simply equal-share traffic. It instead explains this action: Translate business service tiers into differentiated routing, QoS and failover acceptance criteria. For the present requirement, the controlling mechanism is: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
The alternative principle is: IS-IS hierarchy can keep detailed local topology from burdening the backbone while preserving needed reachability. It instead explains this action: Use L1/L2 boundaries and leak only policy-approved interlevel routes. For the present requirement, the controlling mechanism is: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
The alternative principle is: Coexistence protects service continuity only when route ownership and address overlaps are resolved. It instead explains this action: Use a time-bounded dual-running migration with explicit route authority and per-site cutover controls. For the present requirement, the controlling mechanism is: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
Question 322
A network design team is assessing this customer situation: An enterprise iBGP full mesh grows beyond maintainable peer counts across six regional clusters. Audit evidence must be retained separately from the devices under change. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?
Answer & Explanations
Correct answer: B
The offered observation would test: Define regional route, policy and service boundaries from business geography and data constraints. It would not establish that the stated requirement has been met. The direct evidence needed here is: A reflector outage preserves path propagation through the surviving design without unexpected route loss.
Direct verification: A reflector outage preserves path propagation through the surviving design without unexpected route loss. This is the relevant evidence for the action: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. The reason is: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
The offered observation would test: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. It would not establish that the stated requirement has been met. The direct evidence needed here is: A reflector outage preserves path propagation through the surviving design without unexpected route loss.
The offered observation would test: Bound redistribution to explicit prefixes and tags, preventing reintroduction of learned routes. It would not establish that the stated requirement has been met. The direct evidence needed here is: A reflector outage preserves path propagation through the surviving design without unexpected route loss.
Question 323
A network design team is assessing this customer situation: An enterprise iBGP full mesh grows beyond maintainable peer counts across six regional clusters. Audit evidence must be retained separately from the devices under change. Which failure is the most direct risk of taking the tempting design shortcut?
Answer & Explanations
Correct answer: C
The offered consequence belongs to the alternative control path: Implement documented local preference and community policy at controlled BGP boundaries. The relevant failure for the current situation is: A single control-plane fault can suppress route visibility across unrelated regions. The distinction follows from: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
The offered consequence belongs to the alternative control path: Select a topology that provides loop-free alternates and verify fast reroute feasibility for critical destinations. The relevant failure for the current situation is: A single control-plane fault can suppress route visibility across unrelated regions. The distinction follows from: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
A single control-plane fault can suppress route visibility across unrelated regions. That is the risk in the reported situation—An enterprise iBGP full mesh grows beyond maintainable peer counts across six regional clusters. The corrective action is: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. Technical basis: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
The offered consequence belongs to the alternative control path: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. The relevant failure for the current situation is: A single control-plane fault can suppress route visibility across unrelated regions. The distinction follows from: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
Question 324
A network design team is assessing this customer situation: An enterprise iBGP full mesh grows beyond maintainable peer counts across six regional clusters. Audit evidence must be retained separately from the devices under change. Which prerequisite should the architect confirm before choosing and defending this design?
Answer & Explanations
Correct answer: D
The offered preparation belongs with the alternative action: Define regional route, policy and service boundaries from business geography and data constraints. Here the necessary starting condition is: Evaluate BGP path selection, cluster identifiers, route-policy parity and reflector CPU limits. It supports: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains.
The offered preparation belongs with the alternative action: Implement documented local preference and community policy at controlled BGP boundaries. Here the necessary starting condition is: Evaluate BGP path selection, cluster identifiers, route-policy parity and reflector CPU limits. It supports: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains.
The offered preparation belongs with the alternative action: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Here the necessary starting condition is: Evaluate BGP path selection, cluster identifiers, route-policy parity and reflector CPU limits. It supports: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains.
The necessary starting condition is: Evaluate BGP path selection, cluster identifiers, route-policy parity and reflector CPU limits. This enables the action: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. Validate the result with: A reflector outage preserves path propagation through the surviving design without unexpected route loss.
Question 325
In a separate customer architecture review, this issue arises: A carrier uses one route reflector for every region and fears a global control-plane failure. Capacity forecasts include a planned period of rapid site expansion. Which high-level network design choice most directly meets the stated technical and operational requirement?
Answer & Explanations
Correct answer: A
Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience. For the documented situation—A carrier uses one route reflector for every region and fears a global control-plane failure—the targeted response is: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. Check: A reflector outage preserves path propagation through the surviving design without unexpected route loss.
The alternative addresses: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Its principle is: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion. In this case the needed action is: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. Confirm by: A reflector outage preserves path propagation through the surviving design without unexpected route loss.
The alternative addresses a different technical concern: Business expansion changes administrative domains, latency demands and allowed traffic paths. The governing mechanism here is: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience. Accordingly, use: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains.
Fast local repair requires a valid alternate next hop; timer tuning cannot create nonexistent physical diversity. That supports the alternative intervention: Select a topology that provides loop-free alternates and verify fast reroute feasibility for critical destinations. The present situation—A carrier uses one route reflector for every region and fears a global control-plane failure—instead calls for: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. Technical basis: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
Question 326
In a separate customer architecture review, this issue arises: A carrier uses one route reflector for every region and fears a global control-plane failure. Capacity forecasts include a planned period of rapid site expansion. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?
Answer & Explanations
Correct answer: B
The offered observation would test: Use a time-bounded dual-running migration with explicit route authority and per-site cutover controls. It would not establish that the stated requirement has been met. The direct evidence needed here is: A reflector outage preserves path propagation through the surviving design without unexpected route loss.
Direct verification: A reflector outage preserves path propagation through the surviving design without unexpected route loss. This is the relevant evidence for the action: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. The reason is: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience. The scenario is: A carrier uses one route reflector for every region and fears a global control-plane failure.
The offered observation would test: Select a topology that provides loop-free alternates and verify fast reroute feasibility for critical destinations. It would not establish that the stated requirement has been met. The direct evidence needed here is: A reflector outage preserves path propagation through the surviving design without unexpected route loss.
The offered observation would test: Bound redistribution to explicit prefixes and tags, preventing reintroduction of learned routes. It would not establish that the stated requirement has been met. The direct evidence needed here is: A reflector outage preserves path propagation through the surviving design without unexpected route loss. The scenario is: A carrier uses one route reflector for every region and fears a global control-plane failure.
Question 327
In a separate customer architecture review, this issue arises: A carrier uses one route reflector for every region and fears a global control-plane failure. Capacity forecasts include a planned period of rapid site expansion. Which failure is the most direct risk of taking the tempting design shortcut?
Answer & Explanations
Correct answer: C
The offered consequence belongs to the alternative control path: Use L1/L2 boundaries and leak only policy-approved interlevel routes. The relevant failure for the current situation is: A single control-plane fault can suppress route visibility across unrelated regions. The distinction follows from: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
The offered consequence belongs to the alternative control path: Select a topology that provides loop-free alternates and verify fast reroute feasibility for critical destinations. The relevant failure for the current situation is: A single control-plane fault can suppress route visibility across unrelated regions. The distinction follows from: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience. The scenario is: A carrier uses one route reflector for every region and fears a global control-plane failure.
A single control-plane fault can suppress route visibility across unrelated regions. That is the risk in the reported situation—A carrier uses one route reflector for every region and fears a global control-plane failure. The corrective action is: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. Technical basis: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
The offered consequence belongs to the alternative control path: Use a time-bounded dual-running migration with explicit route authority and per-site cutover controls. The relevant failure for the current situation is: A single control-plane fault can suppress route visibility across unrelated regions. The distinction follows from: Route reflection reduces full-mesh sessions but reflector redundancy and policy controls determine convergence resilience.
Question 328
In a separate customer architecture review, this issue arises: A carrier uses one route reflector for every region and fears a global control-plane failure. Capacity forecasts include a planned period of rapid site expansion. Which prerequisite should the architect confirm before choosing and defending this design?
Answer & Explanations
Correct answer: D
The offered preparation belongs with the alternative action: Select a topology that provides loop-free alternates and verify fast reroute feasibility for critical destinations. Here the necessary starting condition is: Evaluate BGP path selection, cluster identifiers, route-policy parity and reflector CPU limits. It supports: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains.
The offered preparation belongs with the alternative action: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. Here the necessary starting condition is: Evaluate BGP path selection, cluster identifiers, route-policy parity and reflector CPU limits. It supports: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains.
The offered preparation belongs with the alternative action: Bound redistribution to explicit prefixes and tags, preventing reintroduction of learned routes. Here the necessary starting condition is: Evaluate BGP path selection, cluster identifiers, route-policy parity and reflector CPU limits. It supports: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains.
The necessary starting condition is: Evaluate BGP path selection, cluster identifiers, route-policy parity and reflector CPU limits. This enables the action: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. Validate the result with: A reflector outage preserves path propagation through the surviving design without unexpected route loss. The scenario is: A carrier uses one route reflector for every region and fears a global control-plane failure.
Question 329
A network design team is assessing this customer situation: Two cloud egress peers receive identical destinations but regulated traffic must prefer a private path. Out-of-hours operations staff cannot perform manual changes at every remote site. Which high-level network design choice most directly meets the stated technical and operational requirement?
Answer & Explanations
Correct answer: A
Implement documented local preference and community policy at controlled BGP boundaries. The relevant technical reason is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent. Confirm through: Route tests show each classified prefix chooses the intended next hop before and after peer failure.
The alternative addresses a different technical concern: Business expansion changes administrative domains, latency demands and allowed traffic paths. The governing mechanism here is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent. Accordingly, use: Implement documented local preference and community policy at controlled BGP boundaries.
IS-IS hierarchy can keep detailed local topology from burdening the backbone while preserving needed reachability. That supports the alternative intervention: Use L1/L2 boundaries and leak only policy-approved interlevel routes. The present situation—Two cloud egress peers receive identical destinations but regulated traffic must prefer a private path—instead calls for: Implement documented local preference and community policy at controlled BGP boundaries. Technical basis: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.
The alternative addresses: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. Its principle is: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path. In this case the needed action is: Implement documented local preference and community policy at controlled BGP boundaries. Confirm by: Route tests show each classified prefix chooses the intended next hop before and after peer failure.
Question 330
A network design team is assessing this customer situation: Two cloud egress peers receive identical destinations but regulated traffic must prefer a private path. Out-of-hours operations staff cannot perform manual changes at every remote site. Which technical rationale best explains the proposed design choice under these constraints?
Answer & Explanations
Correct answer: B
The alternative principle is: IS-IS hierarchy can keep detailed local topology from burdening the backbone while preserving needed reachability. It instead explains this action: Use L1/L2 boundaries and leak only policy-approved interlevel routes. For the present requirement, the controlling mechanism is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.
BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent. This explains the action: Implement documented local preference and community policy at controlled BGP boundaries. For the described facts—Two cloud egress peers receive identical destinations but regulated traffic must prefer a private path—test the outcome through: Route tests show each classified prefix chooses the intended next hop before and after peer failure.
The alternative principle is: Business expansion changes administrative domains, latency demands and allowed traffic paths. It instead explains this action: Define regional route, policy and service boundaries from business geography and data constraints. For the present requirement, the controlling mechanism is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.
The alternative principle is: Smaller broadcast domains and loop controls constrain accidental Layer 2 topology changes. It instead explains this action: Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards. For the present requirement, the controlling mechanism is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent.
Cisco Certified Design Expert (400-007) Practice Tests
- Cisco 400-007 Practice Test 31 - 10 Questions (Last Reviewed 19-Oct-2026)
- Cisco 400-007 Practice Test 32 - 10 Questions (Last Reviewed 18-Oct-2026)
- Cisco 400-007 Practice Test 33 - 10 Questions (Last Reviewed 17-Oct-2026)
- Cisco 400-007 Practice Test 34 - 10 Questions (Last Reviewed 16-Oct-2026)
- Cisco 400-007 Practice Test 35 - 10 Questions (Last Reviewed 15-Oct-2026)