Network Appliance NS0-165 Dumps
Network Appliance NS0-165 Practice Test 120
Question 1190
A Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. Which action and validation evidence belong together?
Explanation
Correct Answer
The situation is that a Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. Validation: Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction. The action and test belong together because network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.
Incorrect Answers
“investigate hot volumes and uneven aggregate placement” evaluates a different intervention. The appropriate action is to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. To confirm, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.
That action-and-evidence pair concerns “use active iq unified manager or ONTAP performance alerts for trends”, not this decision. The appropriate action is to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. To confirm, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.
The proposed pair focuses on “separate host application latency from storage processing latency” instead. The appropriate action is to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. To confirm, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.
Question 1191
During an enterprise ONTAP operations review, A backup workload receives unexpectedly low IOPS because a legacy maximum-QoS policy remains attached to its volume. What is the most appropriate next decision?
Explanation
Correct Answer
Inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability. To verify, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
Incorrect Answers
This alternative focuses on “track iops throughput and latency together in ONTAP monitoring” instead of the required outcome. A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
That choice concerns “troubleshoot san or nas slowdowns using network evidence”, not the immediate requirement. A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
“separate host application latency from storage processing latency” is related to another task, not the failure shown here. A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Question 1192
A backup workload receives unexpectedly low IOPS because a legacy maximum-QoS policy remains attached to its volume. Why does the recommended approach address this particular concern?
Explanation
Correct Answer
A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability. This supports the decision to inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation.
Incorrect Answers
“investigate hot volumes and uneven aggregate placement” explains a different mechanism. Here, a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
That statement concerns “separate host application latency from storage processing latency” rather than the cause in this case. Here, a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
The principle behind “apply supported ONTAP qos policies with workload-aware objectives” is not the one being tested. Here, a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Question 1193
A backup workload receives unexpectedly low IOPS because a legacy maximum-QoS policy remains attached to its volume. Which evidence best validates the proposed outcome?
Explanation
Correct Answer
Temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters. It is the relevant test because a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Incorrect Answers
This evidence addresses “measure performance headroom and saturation before adding hardware” instead of confirming the repair. To check this result, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
“troubleshoot san or nas slowdowns using network evidence” would verify a different part of the system. To check this result, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
That test concerns “separate host application latency from storage processing latency”, not the requested outcome. To check this result, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
Question 1194
Consider this situation: A backup workload receives unexpectedly low IOPS because a legacy maximum-QoS policy remains attached to its volume. A team member suggests: "Disable every security and data-protection function when a client benchmark is slow without inspecting its active QoS limit." What is the main risk?
Explanation
Correct Answer
Risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened. The shortcut is unsafe because a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Incorrect Answers
The alternative risk relates to “Critical application throughput may collapse because the policy itself throttles legitimate demand”, not the stated mistake. Here, risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened.
That consequence concerns “The original volume keeps experiencing long latency and the added storage provides little relief”, which is a different failure. Here, risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened.
“Capital expenditure may not improve service while the root cause remains on a switch or poorly…” does not describe the result of this shortcut. Here, risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened.
Question 1195
A storage operations lead considers: A backup workload receives unexpectedly low IOPS because a legacy maximum-QoS policy remains attached to its volume. Which response and evidence should be linked?
Explanation
Correct Answer
Inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. Validation: Temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters. The action and test belong together because a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Incorrect Answers
The linked action and check for “troubleshoot san or nas slowdowns using network evidence” would not resolve this case. The appropriate action is to inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. To confirm, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
That action-and-evidence pair concerns “separate host application latency from storage processing latency”, not this decision. The appropriate action is to inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. To confirm, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
“track iops throughput and latency together in ONTAP monitoring” evaluates a different intervention. The appropriate action is to inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. To confirm, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
Question 1196
An administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. Which action best addresses this requirement?
Explanation
Correct Answer
The situation is that an administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. Inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability. To verify, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
Incorrect Answers
That choice concerns “use active iq unified manager or ONTAP performance alerts for trends”, not the immediate requirement. A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
The proposed action addresses “investigate hot volumes and uneven aggregate placement” rather than the problem described. A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
The situation is that an administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. “separate host application latency from storage processing latency” is related to another task, not the failure shown here. A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Question 1197
A NetApp storage engineer considers: An administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. Which underlying principle applies?
Explanation
Correct Answer
The situation is that an administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. A low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability. This supports the decision to inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation.
Incorrect Answers
The principle behind “troubleshoot san or nas slowdowns using network evidence” is not the one being tested. Here, a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
“separate host application latency from storage processing latency” describes another technical distinction. Here, a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
“use active iq unified manager or ONTAP performance alerts for trends” explains a different mechanism. Here, a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Question 1198
An administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. What should the team examine before accepting the result?
Explanation
Correct Answer
The situation is that an administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. Temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters. It is the relevant test because a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Incorrect Answers
This evidence addresses “use active iq unified manager or ONTAP performance alerts for trends” instead of confirming the repair. To check this result, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
The situation is that an administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. That test concerns “separate host application latency from storage processing latency”, not the requested outcome. To check this result, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
The proposed check is relevant to “investigate hot volumes and uneven aggregate placement”, but not sufficient here. To check this result, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
Question 1199
An administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. The proposed shortcut is: "Disable every security and data-protection function when a client benchmark is slow without inspecting its active QoS limit." Which failure is most likely?
Explanation
Correct Answer
The situation is that an administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. Risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened. The shortcut is unsafe because a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Incorrect Answers
“The original volume keeps experiencing long latency and the added storage provides little relief” can arise elsewhere, but it is not the most direct risk here. Here, risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened.
That consequence concerns “Capital expenditure may not improve service while the root cause remains on a switch or poorly…”, which is a different failure. Here, risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened.
The alternative risk relates to “The underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change”, not the stated mistake. Here, risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened.
Question 1200
For this case—An administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade.—which implementation and acceptance check are correctly paired?
Explanation
Correct Answer
The situation is that an administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. Inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. Validation: Temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters. The action and test belong together because a low user throughput can result from intentionally applied I/O limits or bottlenecks outside the volume's raw media capability.
Incorrect Answers
That action-and-evidence pair concerns “troubleshoot san or nas slowdowns using network evidence”, not this decision. The appropriate action is to inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. To confirm, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
The proposed pair focuses on “apply supported ONTAP qos policies with workload-aware objectives” instead. The appropriate action is to inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. To confirm, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
The situation is that an administrator must distinguish SSD capacity limits from a policy-enforced ceiling after an ONTAP upgrade. “track iops throughput and latency together in ONTAP monitoring” evaluates a different intervention. The appropriate action is to inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. To confirm, temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests
- Network Appliance NS0-165 Practice Test 118 - 10 Questions (Last Reviewed 15-Nov-2026)
- Network Appliance NS0-165 Practice Test 119 - 10 Questions (Last Reviewed 14-Nov-2026)
- Network Appliance NS0-165 Practice Test 120 - 10 Questions (Last Reviewed 13-Nov-2026)