Practice Exams:

Network Appliance NS0-165 Dumps

EXAM: NetApp Certified Data Administrator, ONTAP
Verified By Experts
Premium Bundle
$49.99

NS0-165 Premium ETE File


  • Premium File 60 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Network Appliance NS0-165 Practice Test 119

Question 1180

A storage operations lead considers: An administrator considers moving a reporting workload after charts reveal its volume consumes most of one controller's I/O budget. Which response and evidence should be linked?

  1. Action: Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. Validation: Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.
  2. Action: Inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. Validation: Temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
  3. Action: Compare node CPU, aggregate utilization, client network and workload latency over representative busy periods before buying controllers. Validation: Benchmark a busy application and record CPU saturation, network throughput and volume placement against candidate improvements.
  4. Action: Look for concentrated IOPS, aggregate saturation and QoS limiting before moving a busy FlexVol to another suitable location. Validation: Record volume-to-aggregate mapping and peak I/O statistics, then test a supported measured relocation for a noncritical dataset.

Explanation

Correct Answer

D:

The situation is that an administrator considers moving a reporting workload after charts reveal its volume consumes most of one controller's I/O budget. Look for concentrated IOPS, aggregate saturation and QoS limiting before moving a busy FlexVol to another suitable location. Validation: Record volume-to-aggregate mapping and peak I/O statistics, then test a supported measured relocation for a noncritical dataset. The action and test belong together because a cluster can have spare total capacity but poor service from an overloaded aggregate or workload placement pattern.

Incorrect Answers

A:

That action-and-evidence pair concerns “troubleshoot san or nas slowdowns using network evidence”, not this decision. The appropriate action is to look for concentrated IOPS, aggregate saturation and QoS limiting before moving a busy FlexVol to another suitable location. To confirm, record volume-to-aggregate mapping and peak I/O statistics, then test a supported measured relocation for a noncritical dataset.

B:

The proposed pair focuses on “diagnose throughput loss from qos and system resource constraints” instead. The appropriate action is to look for concentrated IOPS, aggregate saturation and QoS limiting before moving a busy FlexVol to another suitable location. To confirm, record volume-to-aggregate mapping and peak I/O statistics, then test a supported measured relocation for a noncritical dataset.

C:

“measure performance headroom and saturation before adding hardware” evaluates a different intervention. The appropriate action is to look for concentrated IOPS, aggregate saturation and QoS limiting before moving a busy FlexVol to another suitable location. To confirm, record volume-to-aggregate mapping and peak I/O statistics, then test a supported measured relocation for a noncritical dataset.

Question 1181

A virtualization datastore is slow only on one FC fabric and switch counters reveal CRC errors during the incident. Which action best addresses this requirement?

  1. Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media.
  2. Inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation.
  3. Look for concentrated IOPS, aggregate saturation and QoS limiting before moving a busy FlexVol to another suitable location.
  4. Configure supported ONTAP performance dashboards and threshold alerts for workload response, capacity and component headroom.

Explanation

Correct Answer

A:

Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response. To verify, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

Incorrect Answers

B:

“diagnose throughput loss from qos and system resource constraints” is related to another task, not the failure shown here. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

C:

This alternative focuses on “investigate hot volumes and uneven aggregate placement” instead of the required outcome. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

D:

That choice concerns “use active iq unified manager or ONTAP performance alerts for trends”, not the immediate requirement. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Question 1182

A NetApp storage engineer considers: A virtualization datastore is slow only on one FC fabric and switch counters reveal CRC errors during the incident. Which underlying principle applies?

  1. Application waiting can include CPU scheduling, file locks, network retransmits and storage operations, so one client timer does not pinpoint the disk layer.
  2. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.
  3. A cluster can have spare total capacity but poor service from an overloaded aggregate or workload placement pattern.
  4. A busy system can have high throughput with acceptable latency or low IOPS with long waits; one headline statistic does not explain service quality.

Explanation

Correct Answer

B:

Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response. This supports the decision to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media.

Incorrect Answers

A:

The principle behind “separate host application latency from storage processing latency” is not the one being tested. Here, network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

C:

“investigate hot volumes and uneven aggregate placement” explains a different mechanism. Here, network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

D:

That statement concerns “track iops throughput and latency together in ONTAP monitoring” rather than the cause in this case. Here, network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Question 1183

A virtualization datastore is slow only on one FC fabric and switch counters reveal CRC errors during the incident. What should the team examine before accepting the result?

  1. Temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
  2. Record test workload IOPS, MB/s, latency and response distribution at client and volume layers during a controlled benchmark.
  3. Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.
  4. Capture a representative slow request at client and ONTAP layers and correlate timestamps to identify the dominant wait component.

Explanation

Correct Answer

C:

Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction. It is the relevant test because network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Incorrect Answers

A:

“diagnose throughput loss from qos and system resource constraints” would verify a different part of the system. To check this result, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

B:

That test concerns “track iops throughput and latency together in ONTAP monitoring”, not the requested outcome. To check this result, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

D:

This evidence addresses “separate host application latency from storage processing latency” instead of confirming the repair. To check this result, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

Question 1184

A virtualization datastore is slow only on one FC fabric and switch counters reveal CRC errors during the incident. The proposed shortcut is: "Raise controller CPU and memory allocation because SAN hosts report path retries on a faulty switch uplink." Which failure is most likely?

  1. Capital expenditure may not improve service while the root cause remains on a switch or poorly tuned client.
  2. A real bottleneck in client locking or network transport persists while healthy hardware is unnecessarily changed.
  3. Risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened.
  4. The underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change.

Explanation

Correct Answer

D:

The underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change. The shortcut is unsafe because network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Incorrect Answers

A:

That consequence concerns “Capital expenditure may not improve service while the root cause remains on a switch or poorly…”, which is a different failure. Here, the underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change.

B:

“A real bottleneck in client locking or network transport persists while healthy hardware is unnecessarily changed” does not describe the result of this shortcut. Here, the underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change.

C:

The alternative risk relates to “Risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened”, not the stated mistake. Here, the underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change.

Question 1185

For this case—A virtualization datastore is slow only on one FC fabric and switch counters reveal CRC errors during the incident.—which implementation and acceptance check are correctly paired?

  1. Action: Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. Validation: Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.
  2. Action: Compare node CPU, aggregate utilization, client network and workload latency over representative busy periods before buying controllers. Validation: Benchmark a busy application and record CPU saturation, network throughput and volume placement against candidate improvements.
  3. Action: Compare client-side response timing with ONTAP volume latency, protocol operation types and network transit when isolating slow storage reports. Validation: Capture a representative slow request at client and ONTAP layers and correlate timestamps to identify the dominant wait component.
  4. Action: Inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation. Validation: Temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.

Explanation

Correct Answer

A:

Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. Validation: Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction. The action and test belong together because network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Incorrect Answers

B:

“measure performance headroom and saturation before adding hardware” evaluates a different intervention. The appropriate action is to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. To confirm, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

C:

The linked action and check for “separate host application latency from storage processing latency” would not resolve this case. The appropriate action is to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. To confirm, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

D:

That action-and-evidence pair concerns “diagnose throughput loss from qos and system resource constraints”, not this decision. The appropriate action is to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. To confirm, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

Question 1186

A Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. Which implementation or design choice most directly mitigates the stated issue?

  1. Select appropriate ONTAP quality-of-service controls to limit noisy neighbors or protect critical workloads, testing policy implications.
  2. Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media.
  3. Compare client-side response timing with ONTAP volume latency, protocol operation types and network transit when isolating slow storage reports.
  4. Inspect QoS policy statistics, CPU and storage saturation, concurrent workload mix and protocol service status before remediation.

Explanation

Correct Answer

B:

The situation is that a Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response. To verify, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

Incorrect Answers

A:

“apply supported ONTAP qos policies with workload-aware objectives” is related to another task, not the failure shown here. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

C:

That choice concerns “separate host application latency from storage processing latency”, not the immediate requirement. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

D:

The proposed action addresses “diagnose throughput loss from qos and system resource constraints” rather than the problem described. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Question 1187

A Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. Which technical explanation most directly supports the right approach?

  1. Adding nodes helps only when the actual bottleneck is in a resource that new capacity or relocation can relieve.
  2. A cluster can have spare total capacity but poor service from an overloaded aggregate or workload placement pattern.
  3. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.
  4. Monitoring historical trends and object-specific thresholds helps distinguish recurring congestion from isolated spikes.

Explanation

Correct Answer

C:

The situation is that a Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. Network congestion or path failover can create latency spikes independently of the aggregate's physical drive response. This supports the decision to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media.

Incorrect Answers

A:

“measure performance headroom and saturation before adding hardware” describes another technical distinction. Here, network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

B:

The situation is that a Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. “investigate hot volumes and uneven aggregate placement” explains a different mechanism. Here, network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

D:

The principle behind “use active iq unified manager or ONTAP performance alerts for trends” is not the one being tested. Here, network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Question 1188

For this situation—A Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected.—which check provides the strongest verification?

  1. Generate a safe synthetic workload spike and verify a correctly scoped event includes the affected volume and observed latency.
  2. Temporarily adjust a nonproduction QoS rule under change control and compare service throughput with measured resource counters.
  3. Capture a representative slow request at client and ONTAP layers and correlate timestamps to identify the dominant wait component.
  4. Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

Explanation

Correct Answer

D:

The situation is that a Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction. It is the relevant test because network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Incorrect Answers

A:

That test concerns “use active iq unified manager or ONTAP performance alerts for trends”, not the requested outcome. To check this result, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

B:

The proposed check is relevant to “diagnose throughput loss from qos and system resource constraints”, but not sufficient here. To check this result, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

C:

The situation is that a Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. This evidence addresses “separate host application latency from storage processing latency” instead of confirming the repair. To check this result, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

Question 1189

A Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. If the team does the following—"Raise controller CPU and memory allocation because SAN hosts report path retries on a faulty switch uplink."—what could go wrong?

  1. The underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change.
  2. The original volume keeps experiencing long latency and the added storage provides little relief.
  3. Business transactions may time out even though dashboard throughput looks impressive.
  4. Risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened.

Explanation

Correct Answer

A:

The situation is that a Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. The underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change. The shortcut is unsafe because network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Incorrect Answers

B:

The alternative risk relates to “The original volume keeps experiencing long latency and the added storage provides little relief”, not the stated mistake. Here, the underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change.

C:

“Business transactions may time out even though dashboard throughput looks impressive” can arise elsewhere, but it is not the most direct risk here. Here, the underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change.

D:

That consequence concerns “Risk rises without fixing the I/O cap and important production protection may be unnecessarily weakened”, which is a different failure. Here, the underlying transport errors remain and application I/O pauses continue despite an unrelated storage tuning change.

Question 1190

A Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. Which action and validation evidence belong together?

  1. Action: Look for concentrated IOPS, aggregate saturation and QoS limiting before moving a busy FlexVol to another suitable location. Validation: Record volume-to-aggregate mapping and peak I/O statistics, then test a supported measured relocation for a noncritical dataset.
  2. Action: Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. Validation: Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.
  3. Action: Configure supported ONTAP performance dashboards and threshold alerts for workload response, capacity and component headroom. Validation: Generate a safe synthetic workload spike and verify a correctly scoped event includes the affected volume and observed latency.
  4. Action: Compare client-side response timing with ONTAP volume latency, protocol operation types and network transit when isolating slow storage reports. Validation: Capture a representative slow request at client and ONTAP layers and correlate timestamps to identify the dominant wait component.

Explanation

Correct Answer

B:

The situation is that a Linux NFS client sees repeated retransmissions after a router change while other clients on a different path are unaffected. Correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. Validation: Run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction. The action and test belong together because network congestion or path failover can create latency spikes independently of the aggregate's physical drive response.

Incorrect Answers

A:

“investigate hot volumes and uneven aggregate placement” evaluates a different intervention. The appropriate action is to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. To confirm, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

C:

That action-and-evidence pair concerns “use active iq unified manager or ONTAP performance alerts for trends”, not this decision. The appropriate action is to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. To confirm, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

D:

The proposed pair focuses on “separate host application latency from storage processing latency” instead. The appropriate action is to correlate client retransmits, FC or Ethernet path errors and ONTAP data LIF counters before attributing slow I/O to storage media. To confirm, run a controlled read test while observing host path status and switch error counters, then verify recovery after a supported link correction.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests