HP HPE7-A01 Dumps
HP HPE7-A01 Practice Test 57
Question 560
At a city-government services campus, the support engineering team reports that two isolated VRFs need limited access to the same approved DNS service. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Implement a narrowly scoped supported route-leak and matching firewall policy. Its matching outcome check is to test allowed DNS queries and prohibited cross-tenant routes.
The selected action is Test allowed DNS queries and prohibited cross-tenant routes. Its matching outcome check is to test allowed DNS queries and prohibited cross-tenant routes.
Incorrect Answers
The proposed alternative—apply explicit outbound prefix-list or route-map policy on the BGP peer—does not address this requirement. Shared services require explicit reachability without dissolving VRF isolation.
The proposed alternative—compare interface costs and installed OSPF paths before changing metrics—does not address this requirement. Shared services require explicit reachability without dissolving VRF isolation.
The proposed alternative—simulate upstream outage and confirm default route withdrawal—does not address this requirement. Shared services require explicit reachability without dissolving VRF isolation.
Question 561
At a university residence hall, the technical team reports that the primary campus link fails silently and the routing protocol detects it too slowly. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Evaluate supported BFD session monitoring with compatible peer settings. BFD can shorten failure detection for supported routed neighbor relationships. Confirm the result using this test: Measure BFD state, route withdrawal and forwarding convergence.
Incorrect Answers
The proposed alternative—implement a narrowly scoped supported route-leak and matching firewall policy—does not address this requirement. BFD can shorten failure detection for supported routed neighbor relationships.
The proposed alternative—ensure the specified next hop resolves through an installed reachable route—does not address this requirement. BFD can shorten failure detection for supported routed neighbor relationships.
The proposed alternative—tie default-route origination to a valid upstream route or supported reachability condition—does not address this requirement. BFD can shorten failure detection for supported routed neighbor relationships.
Question 562
At a university residence hall, the technical team reports that the primary campus link fails silently and the routing protocol detects it too slowly. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to disable protocol hold timers entirely and assume it provides stable failover. BFD can shorten failure detection for supported routed neighbor relationships. The corrective choice is: Evaluate supported BFD session monitoring with compatible peer settings.
Incorrect Answers
The shortcut to expect an ordinary stub area to carry every AS-external LSA unchanged is not the error in this case. The actual risk comes from disable protocol hold timers entirely and assume it provides stable failover.
The shortcut to keep adding destination prefixes without restoring next-hop reachability is not the error in this case. The actual risk comes from disable protocol hold timers entirely and assume it provides stable failover.
The shortcut to summarize unrelated prefixes into a broad route that hides unallocated networks is not the error in this case. The actual risk comes from disable protocol hold timers entirely and assume it provides stable failover.
Question 563
At a university residence hall, the technical team reports that the primary campus link fails silently and the routing protocol detects it too slowly. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
BFD can shorten failure detection for supported routed neighbor relationships. This is the technical reason behind the proposed approach: “Evaluate supported BFD session monitoring with compatible peer settings”. The result should be checked by “Measure BFD state, route withdrawal and forwarding convergence”.
Incorrect Answers
The proposed alternative—summaries can limit the detail advertised beyond an area boundary—does not address this requirement. BFD can shorten failure detection for supported routed neighbor relationships.
The proposed alternative—bGP establishment requires compatible autonomous-system identities—does not address this requirement. BFD can shorten failure detection for supported routed neighbor relationships.
The proposed alternative—vRFs isolate route tables so overlapping addresses need not share reachability—does not address this requirement. BFD can shorten failure detection for supported routed neighbor relationships.
Question 564
At a university residence hall, the technical team reports that the primary campus link fails silently and the routing protocol detects it too slowly. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to measure BFD state, route withdrawal and forwarding convergence. It measures whether the stated requirement was met. BFD can shorten failure detection for supported routed neighbor relationships.
Incorrect Answers
The suggested check—withdraw the primary path and inspect installed next hop and traffic—does not test the required result. Instead, measure BFD state, route withdrawal and forwarding convergence.
The suggested check—compare VRF route tables and deny unintended cross-VRF traffic—does not test the required result. Instead, measure BFD state, route withdrawal and forwarding convergence.
The suggested check—capture relay transaction and verify correct gateway-address field—does not test the required result. Instead, measure BFD state, route withdrawal and forwarding convergence.
Question 565
At a university residence hall, the technical team reports that the primary campus link fails silently and the routing protocol detects it too slowly. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Evaluate supported BFD session monitoring with compatible peer settings. Its matching outcome check is to measure BFD state, route withdrawal and forwarding convergence.
The selected action is Measure BFD state, route withdrawal and forwarding convergence. Its matching outcome check is to measure BFD state, route withdrawal and forwarding convergence.
Incorrect Answers
The proposed alternative—use supported policy-based routing with ordered, narrowly matched traffic criteria—does not address this requirement. BFD can shorten failure detection for supported routed neighbor relationships.
The proposed alternative—capture Hellos and verify both peers become Full in the intended area—does not address this requirement. BFD can shorten failure detection for supported routed neighbor relationships.
The proposed alternative—review static route distance and monitored next-hop availability for the intended preference—does not address this requirement. BFD can shorten failure detection for supported routed neighbor relationships.
Question 566
At a regional retail distribution center, the infrastructure team reports that return packets arrive via a different gateway and stateful enforcement drops the session. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Trace both forwarding directions and align path symmetry or supported stateful design. Stateful policies may fail when reverse traffic bypasses the expected session context. Confirm the result using this test: Capture forward and reverse paths and validate full TCP handshake.
Incorrect Answers
The proposed alternative—use supported policy-based routing with ordered, narrowly matched traffic criteria—does not address the current failure. Instead, trace both forwarding directions and align path symmetry or supported stateful design.
The proposed alternative—review stub or NSSA policy and gateway design against required external routes—does not address the current failure. Instead, trace both forwarding directions and align path symmetry or supported stateful design.
The proposed alternative—apply explicit outbound prefix-list or route-map policy on the BGP peer—does not address the current failure. Instead, trace both forwarding directions and align path symmetry or supported stateful design.
Question 567
At a regional retail distribution center, the infrastructure team reports that return packets arrive via a different gateway and stateful enforcement drops the session. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to increase wireless association timeout without tracing the return path. The corrective choice is: Trace both forwarding directions and align path symmetry or supported stateful design.
Incorrect Answers
The shortcut to enable all connected redistribution and assume OSPF detects confidential VLANs is not the error in this case. The actual risk comes from increase wireless association timeout without tracing the return path.
The shortcut to configure unrelated BGP local preference as the solution for mismatched OSPF areas is not the error in this case. The actual risk comes from increase wireless association timeout without tracing the return path.
The shortcut to advertise every internal prefix and depend on the provider to reject it is not the error in this case. The actual risk comes from increase wireless association timeout without tracing the return path.
Question 568
At a regional retail distribution center, the infrastructure team reports that return packets arrive via a different gateway and stateful enforcement drops the session. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
Stateful policies may fail when reverse traffic bypasses the expected session context. This is the technical reason behind the proposed approach: “Trace both forwarding directions and align path symmetry or supported stateful design”. The result should be checked by “Capture forward and reverse paths and validate full TCP handshake”.
Incorrect Answers
The proposed alternative—oSPF neighbors must agree on their common area's identity and parameters—does not address the current failure. Instead, trace both forwarding directions and align path symmetry or supported stateful design.
The proposed alternative—iPv6 router advertisements communicate default-router information to hosts—does not address the current failure. Instead, trace both forwarding directions and align path symmetry or supported stateful design.
The proposed alternative—bFD can shorten failure detection for supported routed neighbor relationships—does not address the current failure. Instead, trace both forwarding directions and align path symmetry or supported stateful design.
Question 569
At a regional retail distribution center, the infrastructure team reports that return packets arrive via a different gateway and stateful enforcement drops the session. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to capture forward and reverse paths and validate full TCP handshake. It measures whether the stated requirement was met.
Incorrect Answers
The suggested check—inspect summary LSAs and reachability for intended and prohibited prefixes—does not test the required result. Instead, capture forward and reverse paths and validate full TCP handshake.
The suggested check—measure BFD state, route withdrawal and forwarding convergence—does not test the required result. Instead, capture forward and reverse paths and validate full TCP handshake.
The suggested check—inspect neighbor state and MTU after correcting the link configuration—does not test the required result. Instead, capture forward and reverse paths and validate full TCP handshake.
Question 570
At a regional retail distribution center, the infrastructure team reports that return packets arrive via a different gateway and stateful enforcement drops the session. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Trace both forwarding directions and align path symmetry or supported stateful design. Its matching outcome check is to capture forward and reverse paths and validate full TCP handshake.
The selected action is Capture forward and reverse paths and validate full TCP handshake. Its matching outcome check is to capture forward and reverse paths and validate full TCP handshake.
Incorrect Answers
The proposed alternative—validate local and remote AS numbers and neighbor transport settings—does not address the current failure. Instead, trace both forwarding directions and align path symmetry or supported stateful design.
The proposed alternative—compare OSPF interface MTU and database-description negotiation at both peers—does not address the current failure. Instead, trace both forwarding directions and align path symmetry or supported stateful design.
The proposed alternative—test allowed DNS queries and prohibited cross-tenant routes—does not address the current failure. Instead, trace both forwarding directions and align path symmetry or supported stateful design.
HPE Network Campus Access Professional (HPE7-A01) Practice Tests
- HP HPE7-A01 Practice Test 55 - 10 Questions (Last Reviewed 25-Sep-2026)
- HP HPE7-A01 Practice Test 56 - 10 Questions (Last Reviewed 24-Sep-2026)
- HP HPE7-A01 Practice Test 57 - 10 Questions (Last Reviewed 19-Nov-2026)
- HP HPE7-A01 Practice Test 58 - 10 Questions (Last Reviewed 18-Nov-2026)
- HP HPE7-A01 Practice Test 59 - 10 Questions (Last Reviewed 17-Nov-2026)