Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 55

Question 540

At a large school district, the IT team reports that a new routed client subnet cannot reach a centralized DHCP server through broadcasts. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Capture relay transaction and verify correct gateway-address field
  2. Apply explicit outbound prefix-list or route-map policy on the BGP peer
  3. Implement a narrowly scoped supported route-leak and matching firewall policy
  4. Configure the supported helper or relay on the client VLAN gateway
  5. Check IPv6 neighbor state and learned IPv6 routes

Explanation

Correct Answers

A:

The selected action is Capture relay transaction and verify correct gateway-address field. Its matching outcome check is to capture relay transaction and verify correct gateway-address field.

D:

The selected action is Configure the supported helper or relay on the client VLAN gateway. Its matching outcome check is to capture relay transaction and verify correct gateway-address field.

Incorrect Answers

B:

The proposed alternative—apply explicit outbound prefix-list or route-map policy on the BGP peer—does not address the current failure. Instead, configure the supported helper or relay on the client VLAN gateway.

C:

The proposed alternative—implement a narrowly scoped supported route-leak and matching firewall policy—does not address the current failure. Instead, configure the supported helper or relay on the client VLAN gateway.

E:

The proposed alternative—check IPv6 neighbor state and learned IPv6 routes—does not address the current failure. Instead, configure the supported helper or relay on the client VLAN gateway.

Question 541

At a regional hospital network, the network team reports that IPv6-only clients see no default gateway despite receiving IPv6 addresses. Which configuration or operating decision most directly addresses the issue?

  1. Configure the supported helper or relay on the client VLAN gateway
  2. Apply reviewed inbound filtering and maximum-prefix policy for that peer
  3. Verify router advertisement settings and permitted prefixes on the VLAN
  4. Align area IDs and compatible interface settings on the intended link

Explanation

Correct Answer

C:

Verify router advertisement settings and permitted prefixes on the VLAN. IPv6 router advertisements communicate default-router information to hosts. Confirm the result using this test: Inspect IPv6 RA contents and host default routes.

Incorrect Answers

A:

The proposed alternative—configure the supported helper or relay on the client VLAN gateway—does not address the current failure. Instead, verify router advertisement settings and permitted prefixes on the VLAN.

B:

The proposed alternative—apply reviewed inbound filtering and maximum-prefix policy for that peer—does not address the current failure. Instead, verify router advertisement settings and permitted prefixes on the VLAN.

D:

The proposed alternative—align area IDs and compatible interface settings on the intended link—does not address the current failure. Instead, verify router advertisement settings and permitted prefixes on the VLAN.

Question 542

At a regional hospital network, the network team reports that IPv6-only clients see no default gateway despite receiving IPv6 addresses. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume the numerically lowest distance detects physical upstream internet failure
  2. Enable every peer route and assume firewall ACLs prevent routing-table growth
  3. Increase static route priority and expect the OSPF database exchange to finish
  4. Assume IPv4 DHCP option 3 configures the IPv6 default gateway

Explanation

Correct Answer

D:

The shortcut at issue is to assume IPv4 DHCP option 3 configures the IPv6 default gateway. The corrective choice is: Verify router advertisement settings and permitted prefixes on the VLAN.

Incorrect Answers

A:

The shortcut to assume the numerically lowest distance detects physical upstream internet failure is not the error in this case. The actual risk comes from assuming IPv4 DHCP option 3 configures the IPv6 default gateway.

B:

The shortcut to enable every peer route and assume firewall ACLs prevent routing-table growth is not the error in this case. The actual risk comes from assuming IPv4 DHCP option 3 configures the IPv6 default gateway.

C:

The shortcut to increase static route priority and expect the OSPF database exchange to finish is not the error in this case. The actual risk comes from assuming IPv4 DHCP option 3 configures the IPv6 default gateway.

Question 543

At a regional hospital network, the network team reports that IPv6-only clients see no default gateway despite receiving IPv6 addresses. Which technical reasoning most specifically justifies the recommended solution?

  1. VRFs isolate route tables so overlapping addresses need not share reachability
  2. An MTU discrepancy can prevent normal database synchronization
  3. IPv6 router advertisements communicate default-router information to hosts
  4. Routing neighbors reject mismatched authentication rather than forming unsafe sessions

Explanation

Correct Answer

C:

IPv6 router advertisements communicate default-router information to hosts. This is the technical reason behind the proposed approach: “Verify router advertisement settings and permitted prefixes on the VLAN”. The result should be checked by “Inspect IPv6 RA contents and host default routes”.

Incorrect Answers

A:

The proposed alternative—vRFs isolate route tables so overlapping addresses need not share reachability—does not address the current failure. Instead, verify router advertisement settings and permitted prefixes on the VLAN.

B:

The proposed alternative—an MTU discrepancy can prevent normal database synchronization—does not address the current failure. Instead, verify router advertisement settings and permitted prefixes on the VLAN.

D:

The proposed alternative—routing neighbors reject mismatched authentication rather than forming unsafe sessions—does not address the current failure. Instead, verify router advertisement settings and permitted prefixes on the VLAN.

Question 544

At a regional hospital network, the network team reports that IPv6-only clients see no default gateway despite receiving IPv6 addresses. Which test would most directly show that the requested outcome was achieved?

  1. Verify best path and failover after a controlled cost change
  2. Compare VRF route tables and deny unintended cross-VRF traffic
  3. Inspect IPv6 RA contents and host default routes
  4. Trace a matched and unmatched flow and compare selected path

Explanation

Correct Answer

C:

The outcome check is to inspect IPv6 RA contents and host default routes. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—verify best path and failover after a controlled cost change—does not test the required result. Instead, inspect IPv6 RA contents and host default routes.

B:

The suggested check—compare VRF route tables and deny unintended cross-VRF traffic—does not test the required result. Instead, inspect IPv6 RA contents and host default routes.

D:

The suggested check—trace a matched and unmatched flow and compare selected path—does not test the required result. Instead, inspect IPv6 RA contents and host default routes.

Question 545

At a regional hospital network, the network team reports that IPv6-only clients see no default gateway despite receiving IPv6 addresses. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Verify router advertisement settings and permitted prefixes on the VLAN
  2. Inspect IPv6 RA contents and host default routes
  3. Use supported policy-based routing with ordered, narrowly matched traffic criteria
  4. Inspect area parameters and advertised default or external routes
  5. Implement a narrowly scoped supported route-leak and matching firewall policy

Explanation

Correct Answers

A:

The selected action is Verify router advertisement settings and permitted prefixes on the VLAN. Its matching outcome check is to inspect IPv6 RA contents and host default routes.

B:

The selected action is Inspect IPv6 RA contents and host default routes. Its matching outcome check is to inspect IPv6 RA contents and host default routes.

Incorrect Answers

C:

The proposed alternative—use supported policy-based routing with ordered, narrowly matched traffic criteria—does not address the current failure. Instead, verify router advertisement settings and permitted prefixes on the VLAN.

D:

The proposed alternative—inspect area parameters and advertised default or external routes—does not address the current failure. Instead, verify router advertisement settings and permitted prefixes on the VLAN.

E:

The proposed alternative—implement a narrowly scoped supported route-leak and matching firewall policy—does not address the current failure. Instead, verify router advertisement settings and permitted prefixes on the VLAN.

Question 546

At an industrial manufacturing site, the network engineering team reports that IPv6 routing adjacencies are absent even though the OSPFv2 IPv4 process is healthy. Which configuration or operating decision most directly addresses the issue?

  1. Check routing protocol multipath eligibility and supported ECMP settings
  2. Configure and validate the appropriate OSPFv3 instance, interfaces and area settings
  3. Apply reviewed inbound filtering and maximum-prefix policy for that peer
  4. Compare OSPF interface MTU and database-description negotiation at both peers

Explanation

Correct Answer

B:

Configure and validate the appropriate OSPFv3 instance, interfaces and area settings. IPv4 and IPv6 routing processes have separate protocol configuration paths. Confirm the result using this test: Check IPv6 neighbor state and learned IPv6 routes.

Incorrect Answers

A:

The proposed alternative—check routing protocol multipath eligibility and supported ECMP settings—does not address the current failure. Instead, configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

C:

The proposed alternative—apply reviewed inbound filtering and maximum-prefix policy for that peer—does not address the current failure. Instead, configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

D:

The proposed alternative—compare OSPF interface MTU and database-description negotiation at both peers—does not address the current failure. Instead, configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

Question 547

At an industrial manufacturing site, the network engineering team reports that IPv6 routing adjacencies are absent even though the OSPFv2 IPv4 process is healthy. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume OSPFv2 automatically exchanges IPv6 prefixes with no OSPFv3 setup
  2. Use only inbound AS-path prepending and promise it sets local outbound priority
  3. Enable every peer route and assume firewall ACLs prevent routing-table growth
  4. Enable all connected redistribution and assume OSPF detects confidential VLANs

Explanation

Correct Answer

A:

The shortcut at issue is to assume OSPFv2 automatically exchanges IPv6 prefixes with no OSPFv3 setup. The corrective choice is: Configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

Incorrect Answers

B:

The shortcut to use only inbound AS-path prepending and promise it sets local outbound priority is not the error in this case. The actual risk comes from assuming OSPFv2 automatically exchanges IPv6 prefixes with no OSPFv3 setup.

C:

The shortcut to enable every peer route and assume firewall ACLs prevent routing-table growth is not the error in this case. The actual risk comes from assuming OSPFv2 automatically exchanges IPv6 prefixes with no OSPFv3 setup.

D:

The shortcut to enable all connected redistribution and assume OSPF detects confidential VLANs is not the error in this case. The actual risk comes from assuming OSPFv2 automatically exchanges IPv6 prefixes with no OSPFv3 setup.

Question 548

At an industrial manufacturing site, the network engineering team reports that IPv6 routing adjacencies are absent even though the OSPFv2 IPv4 process is healthy. Which technical reasoning most specifically justifies the recommended solution?

  1. IPv4 and IPv6 routing processes have separate protocol configuration paths
  2. VRFs isolate route tables so overlapping addresses need not share reachability
  3. Local preference influences outbound best-path selection inside the AS
  4. Area type determines which external LSAs and default routes can be present

Explanation

Correct Answer

A:

IPv4 and IPv6 routing processes have separate protocol configuration paths. This is the technical reason behind the proposed approach: “Configure and validate the appropriate OSPFv3 instance, interfaces and area settings”. The result should be checked by “Check IPv6 neighbor state and learned IPv6 routes”.

Incorrect Answers

B:

The proposed alternative—vRFs isolate route tables so overlapping addresses need not share reachability—does not address the current failure. Instead, configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

C:

The proposed alternative—local preference influences outbound best-path selection inside the AS—does not address the current failure. Instead, configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

D:

The proposed alternative—area type determines which external LSAs and default routes can be present—does not address the current failure. Instead, configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

Question 549

At an industrial manufacturing site, the network engineering team reports that IPv6 routing adjacencies are absent even though the OSPFv2 IPv4 process is healthy. Which test would most directly show that the requested outcome was achieved?

  1. Verify best path and failover after a controlled cost change
  2. Inspect area parameters and advertised default or external routes
  3. Inspect authentication logs and a successful neighbor exchange
  4. Check IPv6 neighbor state and learned IPv6 routes

Explanation

Correct Answer

D:

The outcome check is to check IPv6 neighbor state and learned IPv6 routes. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—verify best path and failover after a controlled cost change—does not test the required result. Instead, check IPv6 neighbor state and learned IPv6 routes.

B:

The suggested check—inspect area parameters and advertised default or external routes—does not test the required result. Instead, check IPv6 neighbor state and learned IPv6 routes.

C:

The suggested check—inspect authentication logs and a successful neighbor exchange—does not test the required result. Instead, check IPv6 neighbor state and learned IPv6 routes.

Question 550

At an industrial manufacturing site, the network engineering team reports that IPv6 routing adjacencies are absent even though the OSPFv2 IPv4 process is healthy. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Check IPv6 neighbor state and learned IPv6 routes
  2. Trace a matched and unmatched flow and compare selected path
  3. Configure and validate the appropriate OSPFv3 instance, interfaces and area settings
  4. Evaluate an appropriate area-border summary design for contiguous approved prefixes
  5. Align the supported authentication method, keys and relevant lifetimes securely

Explanation

Correct Answers

A:

The selected action is Check IPv6 neighbor state and learned IPv6 routes. Its matching outcome check is to check IPv6 neighbor state and learned IPv6 routes.

C:

The selected action is Configure and validate the appropriate OSPFv3 instance, interfaces and area settings. Its matching outcome check is to check IPv6 neighbor state and learned IPv6 routes.

Incorrect Answers

B:

The proposed alternative—trace a matched and unmatched flow and compare selected path—does not address the current failure. Instead, configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

D:

The proposed alternative—evaluate an appropriate area-border summary design for contiguous approved prefixes—does not address the current failure. Instead, configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

E:

The proposed alternative—align the supported authentication method, keys and relevant lifetimes securely—does not address the current failure. Instead, configure and validate the appropriate OSPFv3 instance, interfaces and area settings.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests