HP HPE7-A01 Dumps
HP HPE7-A01 Practice Test 51
Question 500
At an international convention venue, the wireless support team reports that a new routed VLAN is accidentally leaked into an external OSPF domain. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Check external LSAs and confirm restricted subnets are absent. Its matching outcome check is to check external LSAs and confirm restricted subnets are absent.
The selected action is Constrain redistribution using approved prefixes and route-policy matching. Its matching outcome check is to check external LSAs and confirm restricted subnets are absent.
Incorrect Answers
The proposed alternative—align area IDs and compatible interface settings on the intended link—does not address the current failure. Instead, constrain redistribution using approved prefixes and route-policy matching.
The proposed alternative—review stub or NSSA policy and gateway design against required external routes—does not address the current failure. Instead, constrain redistribution using approved prefixes and route-policy matching.
The proposed alternative—inject an oversized lab announcement and inspect rejection and alarms—does not address the current failure. Instead, constrain redistribution using approved prefixes and route-policy matching.
Question 501
At an airport administration network, the wireless engineering team reports that an access area expects a full external routing database despite its stub configuration. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Review stub or NSSA policy and gateway design against required external routes. Area type determines which external LSAs and default routes can be present. Confirm the result using this test: Inspect area parameters and advertised default or external routes.
Incorrect Answers
The proposed alternative—apply explicit outbound prefix-list or route-map policy on the BGP peer—does not address this requirement. Area type determines which external LSAs and default routes can be present.
The proposed alternative—check routing protocol multipath eligibility and supported ECMP settings—does not address this requirement. Area type determines which external LSAs and default routes can be present.
The proposed alternative—implement a narrowly scoped supported route-leak and matching firewall policy—does not address this requirement. Area type determines which external LSAs and default routes can be present.
Question 502
At an airport administration network, the wireless engineering team reports that an access area expects a full external routing database despite its stub configuration. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to expect an ordinary stub area to carry every AS-external LSA unchanged. Area type determines which external LSAs and default routes can be present. The corrective choice is: Review stub or NSSA policy and gateway design against required external routes.
Incorrect Answers
The shortcut to summarize unrelated prefixes into a broad route that hides unallocated networks is not the error in this case. The actual risk comes from expect an ordinary stub area to carry every AS-external LSA unchanged.
The shortcut to enable every peer route and assume firewall ACLs prevent routing-table growth is not the error in this case. The actual risk comes from expect an ordinary stub area to carry every AS-external LSA unchanged.
The shortcut to assume two working physical links automatically become equal-cost routes is not the error in this case. The actual risk comes from expect an ordinary stub area to carry every AS-external LSA unchanged.
Question 503
At an airport administration network, the wireless engineering team reports that an access area expects a full external routing database despite its stub configuration. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
Area type determines which external LSAs and default routes can be present. This is the technical reason behind the proposed approach: “Review stub or NSSA policy and gateway design against required external routes”. The result should be checked by “Inspect area parameters and advertised default or external routes”.
Incorrect Answers
The proposed alternative—summaries can limit the detail advertised beyond an area boundary—does not address this requirement. Area type determines which external LSAs and default routes can be present.
The proposed alternative—an MTU discrepancy can prevent normal database synchronization—does not address this requirement. Area type determines which external LSAs and default routes can be present.
The proposed alternative—static preference must reflect usable paths rather than only configured route presence—does not address this requirement. Area type determines which external LSAs and default routes can be present.
Question 504
At an airport administration network, the wireless engineering team reports that an access area expects a full external routing database despite its stub configuration. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to inspect area parameters and advertised default or external routes. It measures whether the stated requirement was met. Area type determines which external LSAs and default routes can be present.
Incorrect Answers
The suggested check—inspect BGP notification reasons and negotiated AS values—does not test the required result. Instead, inspect area parameters and advertised default or external routes.
The suggested check—inspect neighbor state and MTU after correcting the link configuration—does not test the required result. Instead, inspect area parameters and advertised default or external routes.
The suggested check—verify best path and failover after a controlled cost change—does not test the required result. Instead, inspect area parameters and advertised default or external routes.
Question 505
At an airport administration network, the wireless engineering team reports that an access area expects a full external routing database despite its stub configuration. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Inspect area parameters and advertised default or external routes. Its matching outcome check is to inspect area parameters and advertised default or external routes.
The selected action is Review stub or NSSA policy and gateway design against required external routes. Its matching outcome check is to inspect area parameters and advertised default or external routes.
Incorrect Answers
The proposed alternative—compare interface costs and installed OSPF paths before changing metrics—does not address this requirement. Area type determines which external LSAs and default routes can be present.
The proposed alternative—check external LSAs and confirm restricted subnets are absent—does not address this requirement. Area type determines which external LSAs and default routes can be present.
The proposed alternative—apply the intended local-preference policy to the appropriate learned path—does not address this requirement. Area type determines which external LSAs and default routes can be present.
Question 506
At a public utility operations center, the network engineering team reports that a new routed interconnect has IP reachability but the BGP session does not establish. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Validate local and remote AS numbers and neighbor transport settings. BGP establishment requires compatible autonomous-system identities. Confirm the result using this test: Inspect BGP notification reasons and negotiated AS values.
Incorrect Answers
The proposed alternative—ensure the specified next hop resolves through an installed reachable route—does not address the current failure. Instead, validate local and remote AS numbers and neighbor transport settings.
The proposed alternative—evaluate an appropriate area-border summary design for contiguous approved prefixes—does not address the current failure. Instead, validate local and remote AS numbers and neighbor transport settings.
The proposed alternative—align the supported authentication method, keys and relevant lifetimes securely—does not address the current failure. Instead, validate local and remote AS numbers and neighbor transport settings.
Question 507
At a public utility operations center, the network engineering team reports that a new routed interconnect has IP reachability but the BGP session does not establish. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to adjust the WLAN channel plan to repair a BGP AS mismatch. The corrective choice is: Validate local and remote AS numbers and neighbor transport settings.
Incorrect Answers
The shortcut to disable protocol hold timers entirely and assume it provides stable failover is not the error in this case. The actual risk comes from adjust the WLAN channel plan to repair a BGP AS mismatch.
The shortcut to assume IPv4 DHCP option 3 configures the IPv6 default gateway is not the error in this case. The actual risk comes from adjust the WLAN channel plan to repair a BGP AS mismatch.
The shortcut to disable routing authentication permanently because one neighbor failed is not the error in this case. The actual risk comes from adjust the WLAN channel plan to repair a BGP AS mismatch.
Question 508
At a public utility operations center, the network engineering team reports that a new routed interconnect has IP reachability but the BGP session does not establish. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
BGP establishment requires compatible autonomous-system identities. This is the technical reason behind the proposed approach: “Validate local and remote AS numbers and neighbor transport settings”. The result should be checked by “Inspect BGP notification reasons and negotiated AS values”.
Incorrect Answers
The proposed alternative—bFD can shorten failure detection for supported routed neighbor relationships—does not address the current failure. Instead, validate local and remote AS numbers and neighbor transport settings.
The proposed alternative—filtering route advertisements reduces unintended reachability and exposure—does not address the current failure. Instead, validate local and remote AS numbers and neighbor transport settings.
The proposed alternative—oSPF neighbors must agree on their common area's identity and parameters—does not address the current failure. Instead, validate local and remote AS numbers and neighbor transport settings.
Question 509
At a public utility operations center, the network engineering team reports that a new routed interconnect has IP reachability but the BGP session does not establish. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to inspect BGP notification reasons and negotiated AS values. It measures whether the stated requirement was met.
Incorrect Answers
The suggested check—check IPv6 neighbor state and learned IPv6 routes—does not test the required result. Instead, inspect BGP notification reasons and negotiated AS values.
The suggested check—inspect advertised routes and confirm the prohibited prefix is absent—does not test the required result. Instead, inspect BGP notification reasons and negotiated AS values.
The suggested check—inspect neighbor state and MTU after correcting the link configuration—does not test the required result. Instead, inspect BGP notification reasons and negotiated AS values.
Question 510
At a public utility operations center, the network engineering team reports that a new routed interconnect has IP reachability but the BGP session does not establish. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Validate local and remote AS numbers and neighbor transport settings. Its matching outcome check is to inspect BGP notification reasons and negotiated AS values.
The selected action is Inspect BGP notification reasons and negotiated AS values. Its matching outcome check is to inspect BGP notification reasons and negotiated AS values.
Incorrect Answers
The proposed alternative—trace both forwarding directions and align path symmetry or supported stateful design—does not address the current failure. Instead, validate local and remote AS numbers and neighbor transport settings.
The proposed alternative—verify best path and failover after a controlled cost change—does not address the current failure. Instead, validate local and remote AS numbers and neighbor transport settings.
The proposed alternative—compare OSPF interface MTU and database-description negotiation at both peers—does not address the current failure. Instead, validate local and remote AS numbers and neighbor transport settings.
HPE Network Campus Access Professional (HPE7-A01) Practice Tests
- HP HPE7-A01 Practice Test 49 - 10 Questions (Last Reviewed 01-Oct-2026)
- HP HPE7-A01 Practice Test 50 - 10 Questions (Last Reviewed 30-Sep-2026)
- HP HPE7-A01 Practice Test 51 - 10 Questions (Last Reviewed 29-Sep-2026)
- HP HPE7-A01 Practice Test 52 - 10 Questions (Last Reviewed 28-Sep-2026)
- HP HPE7-A01 Practice Test 53 - 10 Questions (Last Reviewed 27-Sep-2026)