Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 34

Question 330

At a public utility operations center, the network engineering team reports that 80 MHz wireless channels show high contention across a dense classroom building. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Evaluate narrower channels against actual client density and throughput needs
  2. Evaluate supported fast transition security with handset compatibility testing
  3. Select supported bridged or tunneled user traffic placement aligned with policy
  4. Check approved display discovery and denied unrelated services
  5. Compare aggregate cell throughput and co-channel utilization

Explanation

Correct Answers

A:

The selected action is Evaluate narrower channels against actual client density and throughput needs. Its matching outcome check is to compare aggregate cell throughput and co-channel utilization.

E:

The selected action is Compare aggregate cell throughput and co-channel utilization. Its matching outcome check is to compare aggregate cell throughput and co-channel utilization.

Incorrect Answers

B:

The proposed alternative—evaluate supported fast transition security with handset compatibility testing—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

C:

The proposed alternative—select supported bridged or tunneled user traffic placement aligned with policy—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

D:

The proposed alternative—check approved display discovery and denied unrelated services—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

Question 331

At a large hotel conference complex, the network operations team reports that wireless clients can hear a distant AP but cannot send reliable uplink frames back. Which configuration or operating decision most directly addresses the issue?

  1. Balance AP transmit power against client capabilities and the target cell size
  2. Evaluate narrower channels against actual client density and throughput needs
  3. Measure signal-to-noise ratio and channel utilization rather than RSSI alone
  4. Review radio coverage and supported client steering or minimum RSSI settings

Explanation

Correct Answer

A:

Balance AP transmit power against client capabilities and the target cell size. An overly powerful AP creates asymmetric downlink/uplink reachability. Confirm the result using this test: Compare client uplink retries and roaming at coverage boundaries.

Incorrect Answers

B:

The proposed alternative—evaluate narrower channels against actual client density and throughput needs—does not address the current failure. Instead, balance AP transmit power against client capabilities and the target cell size.

C:

The proposed alternative—measure signal-to-noise ratio and channel utilization rather than RSSI alone—does not address the current failure. Instead, balance AP transmit power against client capabilities and the target cell size.

D:

The proposed alternative—review radio coverage and supported client steering or minimum RSSI settings—does not address the current failure. Instead, balance AP transmit power against client capabilities and the target cell size.

Question 332

At a large hotel conference complex, the network operations team reports that wireless clients can hear a distant AP but cannot send reliable uplink frames back. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Interpret a transition recommendation as a guaranteed forced handoff
  2. Increase client retry limits and assume station load will balance automatically
  3. Raise AP power to maximum and assume the client radio gains equal power
  4. Raise 5 GHz EIRP to convert a 2.4 GHz-only radio into a dual-band device

Explanation

Correct Answer

C:

The shortcut at issue is to raise AP power to maximum and assume the client radio gains equal power. The corrective choice is: Balance AP transmit power against client capabilities and the target cell size.

Incorrect Answers

A:

The shortcut to interpret a transition recommendation as a guaranteed forced handoff is not the error in this case. The actual risk comes from raise AP power to maximum and assume the client radio gains equal power.

B:

The shortcut to increase client retry limits and assume station load will balance automatically is not the error in this case. The actual risk comes from raise AP power to maximum and assume the client radio gains equal power.

D:

The shortcut to raise 5 GHz EIRP to convert a 2.4 GHz-only radio into a dual-band device is not the error in this case. The actual risk comes from raise AP power to maximum and assume the client radio gains equal power.

Question 333

At a large hotel conference complex, the network operations team reports that wireless clients can hear a distant AP but cannot send reliable uplink frames back. Which technical reasoning most specifically justifies the recommended solution?

  1. An overly powerful AP creates asymmetric downlink/uplink reachability
  2. Some AP functions depend on the power actually available at the uplink
  3. A client cannot attach to a radio band its hardware does not support
  4. Discovery visibility and actual traffic authorization are separate controls

Explanation

Correct Answer

A:

An overly powerful AP creates asymmetric downlink/uplink reachability. This is the technical reason behind the proposed approach: “Balance AP transmit power against client capabilities and the target cell size”. The result should be checked by “Compare client uplink retries and roaming at coverage boundaries”.

Incorrect Answers

B:

The proposed alternative—some AP functions depend on the power actually available at the uplink—does not address the current failure. Instead, balance AP transmit power against client capabilities and the target cell size.

C:

The proposed alternative—a client cannot attach to a radio band its hardware does not support—does not address the current failure. Instead, balance AP transmit power against client capabilities and the target cell size.

D:

The proposed alternative—discovery visibility and actual traffic authorization are separate controls—does not address the current failure. Instead, balance AP transmit power against client capabilities and the target cell size.

Question 334

At a large hotel conference complex, the network operations team reports that wireless clients can hear a distant AP but cannot send reliable uplink frames back. Which test would most directly show that the requested outcome was achieved?

  1. Inspect AP restricted-power warnings and negotiated PoE class
  2. Verify resulting role, VLAN and allowed resources for both identities
  3. Measure channel overlap, retries and noise floor
  4. Compare client uplink retries and roaming at coverage boundaries

Explanation

Correct Answer

D:

The outcome check is to compare client uplink retries and roaming at coverage boundaries. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—inspect AP restricted-power warnings and negotiated PoE class—does not test the required result. Instead, compare client uplink retries and roaming at coverage boundaries.

B:

The suggested check—verify resulting role, VLAN and allowed resources for both identities—does not test the required result. Instead, compare client uplink retries and roaming at coverage boundaries.

C:

The suggested check—measure channel overlap, retries and noise floor—does not test the required result. Instead, compare client uplink retries and roaming at coverage boundaries.

Question 335

At a large hotel conference complex, the network operations team reports that wireless clients can hear a distant AP but cannot send reliable uplink frames back. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Reposition or add AP coverage based on measured attenuation and cell overlap
  2. Compare client uplink retries and roaming at coverage boundaries
  3. Balance AP transmit power against client capabilities and the target cell size
  4. Capture candidate reports and roam timing on a supported client
  5. Use RADIUS-returned roles or VLAN assignment with reviewed policy mapping

Explanation

Correct Answers

B:

The selected action is Compare client uplink retries and roaming at coverage boundaries. Its matching outcome check is to compare client uplink retries and roaming at coverage boundaries.

C:

The selected action is Balance AP transmit power against client capabilities and the target cell size. Its matching outcome check is to compare client uplink retries and roaming at coverage boundaries.

Incorrect Answers

A:

The proposed alternative—reposition or add AP coverage based on measured attenuation and cell overlap—does not address the current failure. Instead, balance AP transmit power against client capabilities and the target cell size.

D:

The proposed alternative—capture candidate reports and roam timing on a supported client—does not address the current failure. Instead, balance AP transmit power against client capabilities and the target cell size.

E:

The proposed alternative—use RADIUS-returned roles or VLAN assignment with reviewed policy mapping—does not address the current failure. Instead, balance AP transmit power against client capabilities and the target cell size.

Question 336

At a research laboratory building, the network operations team reports that mobile tablets hold a distant AP long after moving into a neighboring room. Which configuration or operating decision most directly addresses the issue?

  1. Confirm 6 GHz radio capability and security requirements before migrating those clients
  2. Provide a carefully planned compatible 2.4 GHz service with the required security
  3. Review client roaming behavior and radio design rather than force uncontrolled disconnects
  4. Balance AP transmit power against client capabilities and the target cell size

Explanation

Correct Answer

C:

Review client roaming behavior and radio design rather than force uncontrolled disconnects. Roaming decisions are influenced by client behavior and available alternatives. Confirm the result using this test: Measure RSSI, retries and roaming timeline across a walking path.

Incorrect Answers

A:

The proposed alternative—confirm 6 GHz radio capability and security requirements before migrating those clients—does not address the current failure. Instead, review client roaming behavior and radio design rather than force uncontrolled disconnects.

B:

The proposed alternative—provide a carefully planned compatible 2.4 GHz service with the required security—does not address the current failure. Instead, review client roaming behavior and radio design rather than force uncontrolled disconnects.

D:

The proposed alternative—balance AP transmit power against client capabilities and the target cell size—does not address the current failure. Instead, review client roaming behavior and radio design rather than force uncontrolled disconnects.

Question 337

At a research laboratory building, the network operations team reports that mobile tablets hold a distant AP long after moving into a neighboring room. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Set adjacent APs to overlapping wide channels to maximize coverage
  2. Raise 5 GHz EIRP to convert a 2.4 GHz-only radio into a dual-band device
  3. Disable all guest isolation controls because the portal page is unreachable
  4. Disable all nearby APs so the tablet must remain on one distant radio

Explanation

Correct Answer

D:

The shortcut at issue is to disable all nearby APs so the tablet must remain on one distant radio. The corrective choice is: Review client roaming behavior and radio design rather than force uncontrolled disconnects.

Incorrect Answers

A:

The shortcut to set adjacent APs to overlapping wide channels to maximize coverage is not the error in this case. The actual risk comes from disable all nearby APs so the tablet must remain on one distant radio.

B:

The shortcut to raise 5 GHz EIRP to convert a 2.4 GHz-only radio into a dual-band device is not the error in this case. The actual risk comes from disable all nearby APs so the tablet must remain on one distant radio.

C:

The shortcut to disable all guest isolation controls because the portal page is unreachable is not the error in this case. The actual risk comes from disable all nearby APs so the tablet must remain on one distant radio.

Question 338

At a research laboratory building, the network operations team reports that mobile tablets hold a distant AP long after moving into a neighboring room. Which technical reasoning most specifically justifies the recommended solution?

  1. Guest portal flow depends on both initial network access and successful redirection
  2. Narrower channels can increase channel reuse and reduce competing AP overlap
  3. Roaming decisions are influenced by client behavior and available alternatives
  4. Neighbor information can reduce blind scans for compatible clients

Explanation

Correct Answer

C:

Roaming decisions are influenced by client behavior and available alternatives. This is the technical reason behind the proposed approach: “Review client roaming behavior and radio design rather than force uncontrolled disconnects”. The result should be checked by “Measure RSSI, retries and roaming timeline across a walking path”.

Incorrect Answers

A:

The proposed alternative—guest portal flow depends on both initial network access and successful redirection—does not address the current failure. Instead, review client roaming behavior and radio design rather than force uncontrolled disconnects.

B:

The proposed alternative—narrower channels can increase channel reuse and reduce competing AP overlap—does not address the current failure. Instead, review client roaming behavior and radio design rather than force uncontrolled disconnects.

D:

The proposed alternative—neighbor information can reduce blind scans for compatible clients—does not address the current failure. Instead, review client roaming behavior and radio design rather than force uncontrolled disconnects.

Question 339

At a research laboratory building, the network operations team reports that mobile tablets hold a distant AP long after moving into a neighboring room. Which test would most directly show that the requested outcome was achieved?

  1. Compare SNR, retries and throughput during the busy period
  2. Compare aggregate cell throughput and co-channel utilization
  3. Measure RSSI, retries and roaming timeline across a walking path
  4. Check approved display discovery and denied unrelated services

Explanation

Correct Answer

C:

The outcome check is to measure RSSI, retries and roaming timeline across a walking path. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—compare SNR, retries and throughput during the busy period—does not test the required result. Instead, measure RSSI, retries and roaming timeline across a walking path.

B:

The suggested check—compare aggregate cell throughput and co-channel utilization—does not test the required result. Instead, measure RSSI, retries and roaming timeline across a walking path.

D:

The suggested check—check approved display discovery and denied unrelated services—does not test the required result. Instead, measure RSSI, retries and roaming timeline across a walking path.

Question 340

At a research laboratory building, the network operations team reports that mobile tablets hold a distant AP long after moving into a neighboring room. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Survey signal and SNR on both sides of the wall
  2. Review client roaming behavior and radio design rather than force uncontrolled disconnects
  3. Configure scoped mDNS/AirGroup discovery policy and matching access permissions
  4. Measure RSSI, retries and roaming timeline across a walking path
  5. Select supported bridged or tunneled user traffic placement aligned with policy

Explanation

Correct Answers

B:

The selected action is Review client roaming behavior and radio design rather than force uncontrolled disconnects. Its matching outcome check is to measure RSSI, retries and roaming timeline across a walking path.

D:

The selected action is Measure RSSI, retries and roaming timeline across a walking path. Its matching outcome check is to measure RSSI, retries and roaming timeline across a walking path.

Incorrect Answers

A:

The proposed alternative—survey signal and SNR on both sides of the wall—does not address the current failure. Instead, review client roaming behavior and radio design rather than force uncontrolled disconnects.

C:

The proposed alternative—configure scoped mDNS/AirGroup discovery policy and matching access permissions—does not address the current failure. Instead, review client roaming behavior and radio design rather than force uncontrolled disconnects.

E:

The proposed alternative—select supported bridged or tunneled user traffic placement aligned with policy—does not address the current failure. Instead, review client roaming behavior and radio design rather than force uncontrolled disconnects.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests