Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 33

Question 320

At an international convention venue, the wireless support team reports that many nearby APs use the same 5 GHz channel and airtime collapses at high load. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Use supported BSS transition management while respecting client choice
  2. Record per-channel utilization and client retries after tuning
  3. Compare SNR, retries and throughput during the busy period
  4. Redistribute channels based on a site survey and realistic reuse plan
  5. Assess wireless mesh backhaul health and hop count separately from client access

Explanation

Correct Answers

B:

The selected action is Record per-channel utilization and client retries after tuning.

D:

The selected action is Redistribute channels based on a site survey and realistic reuse plan.

Incorrect Answers

A:

The proposed alternative—use supported BSS transition management while respecting client choice—does not address the current failure. Instead, redistribute channels based on a site survey and realistic reuse plan.

C:

The proposed alternative—compare SNR, retries and throughput during the busy period—does not address the current failure. Instead, redistribute channels based on a site survey and realistic reuse plan.

E:

The proposed alternative—assess wireless mesh backhaul health and hop count separately from client access—does not address the current failure. Instead, redistribute channels based on a site survey and realistic reuse plan.

Question 321

At an airport administration network, the wireless engineering team reports that neighboring WLAN APs operate on overlapping channel plans with high retransmission. Which configuration or operating decision most directly addresses the issue?

  1. Confirm 6 GHz radio capability and security requirements before migrating those clients
  2. Configure scoped mDNS/AirGroup discovery policy and matching access permissions
  3. Validate predictive RF design through an active post-installation site survey
  4. Select appropriately non-overlapping channels and verify regulatory constraints

Explanation

Correct Answer

D:

Select appropriately non-overlapping channels and verify regulatory constraints. Adjacent-channel energy can interfere without participating in the same contention domain. Confirm the result using this test: Measure channel overlap, retries and noise floor.

Incorrect Answers

A:

The proposed alternative—confirm 6 GHz radio capability and security requirements before migrating those clients—does not address this requirement. Adjacent-channel energy can interfere without participating in the same contention domain.

B:

The proposed alternative—configure scoped mDNS/AirGroup discovery policy and matching access permissions—does not address this requirement. Adjacent-channel energy can interfere without participating in the same contention domain.

C:

The proposed alternative—validate predictive RF design through an active post-installation site survey—does not address this requirement. Adjacent-channel energy can interfere without participating in the same contention domain.

Question 322

At an airport administration network, the wireless engineering team reports that neighboring WLAN APs operate on overlapping channel plans with high retransmission. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Disable 2.4 GHz globally before checking whether all devices support 5 GHz
  2. Allow every mDNS announcement across the campus to simplify discovery
  3. Treat strong RSSI as proof that interference cannot affect frames
  4. Set adjacent APs to overlapping wide channels to maximize coverage

Explanation

Correct Answer

D:

The shortcut at issue is to set adjacent APs to overlapping wide channels to maximize coverage. Adjacent-channel energy can interfere without participating in the same contention domain. The corrective choice is: Select appropriately non-overlapping channels and verify regulatory constraints.

Incorrect Answers

A:

The shortcut to disable 2.4 GHz globally before checking whether all devices support 5 GHz is not the error in this case. The actual risk comes from set adjacent APs to overlapping wide channels to maximize coverage.

B:

The shortcut to allow every mDNS announcement across the campus to simplify discovery is not the error in this case. The actual risk comes from set adjacent APs to overlapping wide channels to maximize coverage.

C:

The shortcut to treat strong RSSI as proof that interference cannot affect frames is not the error in this case. The actual risk comes from set adjacent APs to overlapping wide channels to maximize coverage.

Question 323

At an airport administration network, the wireless engineering team reports that neighboring WLAN APs operate on overlapping channel plans with high retransmission. Which technical reasoning most specifically justifies the recommended solution?

  1. Band steering should favor capable clients while preserving compatibility
  2. Adjacent-channel energy can interfere without participating in the same contention domain
  3. 802.11v provides transition advice rather than absolute control over every station
  4. Narrower channels can increase channel reuse and reduce competing AP overlap

Explanation

Correct Answer

B:

Adjacent-channel energy can interfere without participating in the same contention domain. This is the technical reason behind the proposed approach: “Select appropriately non-overlapping channels and verify regulatory constraints”. The result should be checked by “Measure channel overlap, retries and noise floor”.

Incorrect Answers

A:

The proposed alternative—band steering should favor capable clients while preserving compatibility—does not address this requirement. Adjacent-channel energy can interfere without participating in the same contention domain.

C:

The proposed alternative—802.11v provides transition advice rather than absolute control over every station—does not address this requirement. Adjacent-channel energy can interfere without participating in the same contention domain.

D:

The proposed alternative—narrower channels can increase channel reuse and reduce competing AP overlap—does not address this requirement. Adjacent-channel energy can interfere without participating in the same contention domain.

Question 324

At an airport administration network, the wireless engineering team reports that neighboring WLAN APs operate on overlapping channel plans with high retransmission. Which test would most directly show that the requested outcome was achieved?

  1. Compare client uplink retries and roaming at coverage boundaries
  2. Measure channel overlap, retries and noise floor
  3. Review BSS transition requests and resulting client associations
  4. Compare collision/retry indicators and concurrent client performance

Explanation

Correct Answer

B:

The outcome check is to measure channel overlap, retries and noise floor. It measures whether the stated requirement was met. Adjacent-channel energy can interfere without participating in the same contention domain.

Incorrect Answers

A:

The suggested check—compare client uplink retries and roaming at coverage boundaries—does not test the required result. Instead, measure channel overlap, retries and noise floor.

C:

The suggested check—review BSS transition requests and resulting client associations—does not test the required result. Instead, measure channel overlap, retries and noise floor.

D:

The suggested check—compare collision/retry indicators and concurrent client performance—does not test the required result. Instead, measure channel overlap, retries and noise floor.

Question 325

At an airport administration network, the wireless engineering team reports that neighboring WLAN APs operate on overlapping channel plans with high retransmission. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Balance AP transmit power against client capabilities and the target cell size
  2. Measure beacon airtime and client service after consolidation
  3. Measure channel overlap, retries and noise floor
  4. Select appropriately non-overlapping channels and verify regulatory constraints
  5. Align antenna pattern, gain and mounting with the coverage objective

Explanation

Correct Answers

C:

The selected action is Measure channel overlap, retries and noise floor. Its matching outcome check is to measure channel overlap, retries and noise floor.

D:

The selected action is Select appropriately non-overlapping channels and verify regulatory constraints. Its matching outcome check is to measure channel overlap, retries and noise floor.

Incorrect Answers

A:

The proposed alternative—balance AP transmit power against client capabilities and the target cell size—does not address this requirement. Adjacent-channel energy can interfere without participating in the same contention domain.

B:

The proposed alternative—measure beacon airtime and client service after consolidation—does not address this requirement. Adjacent-channel energy can interfere without participating in the same contention domain.

E:

The proposed alternative—align antenna pattern, gain and mounting with the coverage objective—does not address this requirement. Adjacent-channel energy can interfere without participating in the same contention domain.

Question 326

At a public utility operations center, the network engineering team reports that 80 MHz wireless channels show high contention across a dense classroom building. Which configuration or operating decision most directly addresses the issue?

  1. Measure signal-to-noise ratio and channel utilization rather than RSSI alone
  2. Redistribute channels based on a site survey and realistic reuse plan
  3. Validate RADIUS reachability and configured failover behavior before altering the passphrase
  4. Evaluate narrower channels against actual client density and throughput needs

Explanation

Correct Answer

D:

Evaluate narrower channels against actual client density and throughput needs. Narrower channels can increase channel reuse and reduce competing AP overlap. Confirm the result using this test: Compare aggregate cell throughput and co-channel utilization.

Incorrect Answers

A:

The proposed alternative—measure signal-to-noise ratio and channel utilization rather than RSSI alone—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

B:

The proposed alternative—redistribute channels based on a site survey and realistic reuse plan—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

C:

The proposed alternative—validate RADIUS reachability and configured failover behavior before altering the passphrase—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

Question 327

At a public utility operations center, the network engineering team reports that 80 MHz wireless channels show high contention across a dense classroom building. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Replace the client SSID name and assume backhaul capacity increases
  2. Rotate the shared WPA2-PSK to fix an 802.1X server timeout
  3. Set adjacent APs to overlapping wide channels to maximize coverage
  4. Choose maximum width for every AP regardless of neighboring channel availability

Explanation

Correct Answer

D:

The shortcut at issue is to choose maximum width for every AP regardless of neighboring channel availability. Narrower channels can increase channel reuse and reduce competing AP overlap. The corrective choice is: Evaluate narrower channels against actual client density and throughput needs.

Incorrect Answers

A:

The shortcut to replace the client SSID name and assume backhaul capacity increases is not the error in this case. The actual risk comes from choose maximum width for every AP regardless of neighboring channel availability.

B:

The shortcut to rotate the shared WPA2-PSK to fix an 802.1X server timeout is not the error in this case. The actual risk comes from choose maximum width for every AP regardless of neighboring channel availability.

C:

The shortcut to set adjacent APs to overlapping wide channels to maximize coverage is not the error in this case. The actual risk comes from choose maximum width for every AP regardless of neighboring channel availability.

Question 328

At a public utility operations center, the network engineering team reports that 80 MHz wireless channels show high contention across a dense classroom building. Which technical reasoning most specifically justifies the recommended solution?

  1. Narrower channels can increase channel reuse and reduce competing AP overlap
  2. Adjacent-channel energy can interfere without participating in the same contention domain
  3. Mutual certificate-based authentication requires valid, trusted certificate identities
  4. Roaming decisions are influenced by client behavior and available alternatives

Explanation

Correct Answer

A:

Narrower channels can increase channel reuse and reduce competing AP overlap. This is the technical reason behind the proposed approach: “Evaluate narrower channels against actual client density and throughput needs”. The result should be checked by “Compare aggregate cell throughput and co-channel utilization”.

Incorrect Answers

B:

The proposed alternative—adjacent-channel energy can interfere without participating in the same contention domain—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

C:

The proposed alternative—mutual certificate-based authentication requires valid, trusted certificate identities—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

D:

The proposed alternative—roaming decisions are influenced by client behavior and available alternatives—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

Question 329

At a public utility operations center, the network engineering team reports that 80 MHz wireless channels show high contention across a dense classroom building. Which test would most directly show that the requested outcome was achieved?

  1. Compare aggregate cell throughput and co-channel utilization
  2. Validate site-survey coverage across target aisles and sidelobes
  3. Measure RSSI, retries and roaming timeline across a walking path
  4. Time authentication exchanges and voice continuity across roam events

Explanation

Correct Answer

A:

The outcome check is to compare aggregate cell throughput and co-channel utilization. It measures whether the stated requirement was met. Narrower channels can increase channel reuse and reduce competing AP overlap.

Incorrect Answers

B:

The suggested check—validate site-survey coverage across target aisles and sidelobes—does not test the required result. Instead, compare aggregate cell throughput and co-channel utilization.

C:

The suggested check—measure RSSI, retries and roaming timeline across a walking path—does not test the required result. Instead, compare aggregate cell throughput and co-channel utilization.

D:

The suggested check—time authentication exchanges and voice continuity across roam events—does not test the required result. Instead, compare aggregate cell throughput and co-channel utilization.

Question 330

At a public utility operations center, the network engineering team reports that 80 MHz wireless channels show high contention across a dense classroom building. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Evaluate narrower channels against actual client density and throughput needs
  2. Evaluate supported fast transition security with handset compatibility testing
  3. Select supported bridged or tunneled user traffic placement aligned with policy
  4. Check approved display discovery and denied unrelated services
  5. Compare aggregate cell throughput and co-channel utilization

Explanation

Correct Answers

A:

The selected action is Evaluate narrower channels against actual client density and throughput needs. Its matching outcome check is to compare aggregate cell throughput and co-channel utilization.

E:

The selected action is Compare aggregate cell throughput and co-channel utilization. Its matching outcome check is to compare aggregate cell throughput and co-channel utilization.

Incorrect Answers

B:

The proposed alternative—evaluate supported fast transition security with handset compatibility testing—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

C:

The proposed alternative—select supported bridged or tunneled user traffic placement aligned with policy—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

D:

The proposed alternative—check approved display discovery and denied unrelated services—does not address this requirement. Narrower channels can increase channel reuse and reduce competing AP overlap.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests