Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 25

Question 240

At a multi-floor office campus, the campus engineering team reports that an ARP-spoofing test redirects clients even though the switch has DHCP snooping records. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Submit a mismatched ARP mapping and inspect drop counters
  2. Apply BPDU protection to designated edge ports and recover only after the loop source is addressed
  3. Apply supported ARP inspection using valid bindings and trusted network ports
  4. Correlate CRC increments with optic diagnostics and corrected media
  5. Enable and verify IGMP snooping and an appropriate querier design for the VLAN

Explanation

Correct Answers

A:

The selected action is Submit a mismatched ARP mapping and inspect drop counters.

C:

The selected action is Apply supported ARP inspection using valid bindings and trusted network ports.

Incorrect Answers

B:

The proposed alternative—apply BPDU protection to designated edge ports and recover only after the loop source is addressed—does not address this requirement. ARP inspection can reject inconsistent IP-to-MAC claims on untrusted interfaces.

D:

The proposed alternative—correlate CRC increments with optic diagnostics and corrected media—does not address this requirement. ARP inspection can reject inconsistent IP-to-MAC claims on untrusted interfaces.

E:

The proposed alternative—enable and verify IGMP snooping and an appropriate querier design for the VLAN—does not address this requirement. ARP inspection can reject inconsistent IP-to-MAC claims on untrusted interfaces.

Question 241

At a logistics and warehousing campus, the access-network team reports that a miswired IoT switch sends excessive broadcast traffic that disrupts nearby user ports. Which configuration or operating decision most directly addresses the issue?

  1. Review RSTP topology roles and edge-port settings before adjusting timers
  2. Mark only authorized DHCP uplinks as trusted and enable DHCP snooping where supported
  3. Apply appropriately scoped storm-control limits and repair the physical loop
  4. Align the reviewed native VLAN design and tagging expectations at both peers

Explanation

Correct Answer

C:

Apply appropriately scoped storm-control limits and repair the physical loop. Storm control limits broadcast overload while the underlying fault is investigated. Confirm the result using this test: Inspect broadcast rates, discard counters and physical link topology.

Incorrect Answers

A:

The proposed alternative—review RSTP topology roles and edge-port settings before adjusting timers—does not address the current failure. Instead, apply appropriately scoped storm-control limits and repair the physical loop.

B:

The proposed alternative—mark only authorized DHCP uplinks as trusted and enable DHCP snooping where supported—does not address the current failure. Instead, apply appropriately scoped storm-control limits and repair the physical loop.

D:

The proposed alternative—align the reviewed native VLAN design and tagging expectations at both peers—does not address the current failure. Instead, apply appropriately scoped storm-control limits and repair the physical loop.

Question 242

At a logistics and warehousing campus, the access-network team reports that a miswired IoT switch sends excessive broadcast traffic that disrupts nearby user ports. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Configure one member as an unrelated standalone LAG and expect seamless failover
  2. Assume tagging all other VLANs also corrects the native VLAN mismatch
  3. Increase the root bridge priority to hide the unauthorized bridge
  4. Set a high multicast address limit without addressing the broadcast traffic

Explanation

Correct Answer

D:

The shortcut at issue is to set a high multicast address limit without addressing the broadcast traffic. The corrective choice is: Apply appropriately scoped storm-control limits and repair the physical loop.

Incorrect Answers

A:

The shortcut to configure one member as an unrelated standalone LAG and expect seamless failover is not the error in this case. The actual risk comes from set a high multicast address limit without addressing the broadcast traffic.

B:

The shortcut to assume tagging all other VLANs also corrects the native VLAN mismatch is not the error in this case. The actual risk comes from set a high multicast address limit without addressing the broadcast traffic.

C:

The shortcut to increase the root bridge priority to hide the unauthorized bridge is not the error in this case. The actual risk comes from set a high multicast address limit without addressing the broadcast traffic.

Question 243

At a logistics and warehousing campus, the access-network team reports that a miswired IoT switch sends excessive broadcast traffic that disrupts nearby user ports. Which technical reasoning most specifically justifies the recommended solution?

  1. Consistent multichassis aggregation requires both peers to participate correctly
  2. Snooping restricts multicast forwarding according to learned receiver memberships
  3. Storm control limits broadcast overload while the underlying fault is investigated
  4. Ordered ACL evaluation can cause a broad earlier match to bypass a later rule

Explanation

Correct Answer

C:

Storm control limits broadcast overload while the underlying fault is investigated. This is the technical reason behind the proposed approach: “Apply appropriately scoped storm-control limits and repair the physical loop”. The result should be checked by “Inspect broadcast rates, discard counters and physical link topology”.

Incorrect Answers

A:

The proposed alternative—consistent multichassis aggregation requires both peers to participate correctly—does not address the current failure. Instead, apply appropriately scoped storm-control limits and repair the physical loop.

B:

The proposed alternative—snooping restricts multicast forwarding according to learned receiver memberships—does not address the current failure. Instead, apply appropriately scoped storm-control limits and repair the physical loop.

D:

The proposed alternative—ordered ACL evaluation can cause a broad earlier match to bypass a later rule—does not address the current failure. Instead, apply appropriately scoped storm-control limits and repair the physical loop.

Question 244

At a logistics and warehousing campus, the access-network team reports that a miswired IoT switch sends excessive broadcast traffic that disrupts nearby user ports. Which test would most directly show that the requested outcome was achieved?

  1. Inspect MAC move logs and port topology before and after correction
  2. Test permitted and blocked traffic while inspecting rule hit counts
  3. Submit a mismatched ARP mapping and inspect drop counters
  4. Inspect broadcast rates, discard counters and physical link topology

Explanation

Correct Answer

D:

The outcome check is to inspect broadcast rates, discard counters and physical link topology. It measures whether the stated requirement was met.

Incorrect Answers

A:

The suggested check—inspect MAC move logs and port topology before and after correction—does not test the required result. Instead, inspect broadcast rates, discard counters and physical link topology.

B:

The suggested check—test permitted and blocked traffic while inspecting rule hit counts—does not test the required result. Instead, inspect broadcast rates, discard counters and physical link topology.

C:

The suggested check—submit a mismatched ARP mapping and inspect drop counters—does not test the required result. Instead, inspect broadcast rates, discard counters and physical link topology.

Question 245

At a logistics and warehousing campus, the access-network team reports that a miswired IoT switch sends excessive broadcast traffic that disrupts nearby user ports. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Configure the correct DHCP relay destination on the VLAN gateway interface
  2. Apply appropriately scoped storm-control limits and repair the physical loop
  3. Correlate CRC increments with optic diagnostics and corrected media
  4. Inspect broadcast rates, discard counters and physical link topology
  5. Trace the physical loop or unauthorized bridge and review learned MAC movements

Explanation

Correct Answers

B:

The selected action is Apply appropriately scoped storm-control limits and repair the physical loop. Its matching outcome check is to inspect broadcast rates, discard counters and physical link topology.

D:

The selected action is Inspect broadcast rates, discard counters and physical link topology. Its matching outcome check is to inspect broadcast rates, discard counters and physical link topology.

Incorrect Answers

A:

The proposed alternative—configure the correct DHCP relay destination on the VLAN gateway interface—does not address the current failure. Instead, apply appropriately scoped storm-control limits and repair the physical loop.

C:

The proposed alternative—correlate CRC increments with optic diagnostics and corrected media—does not address the current failure. Instead, apply appropriately scoped storm-control limits and repair the physical loop.

E:

The proposed alternative—trace the physical loop or unauthorized bridge and review learned MAC movements—does not address the current failure. Instead, apply appropriately scoped storm-control limits and repair the physical loop.

Question 246

At a municipal public library system, the operations team reports that the same endpoint MAC alternates between two access ports and connectivity is unstable. Which configuration or operating decision most directly addresses the issue?

  1. Permit the required VLAN on both ends of the tagged uplink without exposing unrelated VLANs
  2. Configure the correct DHCP relay destination on the VLAN gateway interface
  3. Apply IPv6 router-advertisement guard on untrusted access ports where supported
  4. Trace the physical loop or unauthorized bridge and review learned MAC movements

Explanation

Correct Answer

D:

Trace the physical loop or unauthorized bridge and review learned MAC movements. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate. Confirm the result using this test: Inspect MAC move logs and port topology before and after correction.

Incorrect Answers

A:

The proposed alternative—permit the required VLAN on both ends of the tagged uplink without exposing unrelated VLANs—does not address this requirement. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

B:

The proposed alternative—configure the correct DHCP relay destination on the VLAN gateway interface—does not address this requirement. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

C:

The proposed alternative—apply IPv6 router-advertisement guard on untrusted access ports where supported—does not address this requirement. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

Question 247

At a municipal public library system, the operations team reports that the same endpoint MAC alternates between two access ports and connectivity is unstable. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Set a high multicast address limit without addressing the broadcast traffic
  2. Increase the MAC aging time and assume the underlying loop disappears
  3. Enable only IPv4 DHCP snooping and assume it blocks IPv6 router advertisements
  4. Force a static aggregate on one end while keeping LACP active on the other

Explanation

Correct Answer

B:

The shortcut at issue is to increase the MAC aging time and assume the underlying loop disappears. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate. The corrective choice is: Trace the physical loop or unauthorized bridge and review learned MAC movements.

Incorrect Answers

A:

The shortcut to set a high multicast address limit without addressing the broadcast traffic is not the error in this case. The actual risk comes from increase the MAC aging time and assume the underlying loop disappears.

C:

The shortcut to enable only IPv4 DHCP snooping and assume it blocks IPv6 router advertisements is not the error in this case. The actual risk comes from increase the MAC aging time and assume the underlying loop disappears.

D:

The shortcut to force a static aggregate on one end while keeping LACP active on the other is not the error in this case. The actual risk comes from increase the MAC aging time and assume the underlying loop disappears.

Question 248

At a municipal public library system, the operations team reports that the same endpoint MAC alternates between two access ports and connectivity is unstable. Which technical reasoning most specifically justifies the recommended solution?

  1. LACP members must agree on the aggregate and compatible link parameters
  2. Rapid spanning-tree roles and correct link types allow controlled convergence
  3. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate
  4. Aggregation alone does not merge device management or create one stack identity

Explanation

Correct Answer

C:

Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate. This is the technical reason behind the proposed approach: “Trace the physical loop or unauthorized bridge and review learned MAC movements”. The result should be checked by “Inspect MAC move logs and port topology before and after correction”.

Incorrect Answers

A:

The proposed alternative—lACP members must agree on the aggregate and compatible link parameters—does not address this requirement. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

B:

The proposed alternative—rapid spanning-tree roles and correct link types allow controlled convergence—does not address this requirement. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

D:

The proposed alternative—aggregation alone does not merge device management or create one stack identity—does not address this requirement. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

Question 249

At a municipal public library system, the operations team reports that the same endpoint MAC alternates between two access ports and connectivity is unstable. Which test would most directly show that the requested outcome was achieved?

  1. Inspect LLDP-MED advertisement and phone VLAN assignment
  2. Inspect stack member state and independent management identities
  3. Submit a mismatched ARP mapping and inspect drop counters
  4. Inspect MAC move logs and port topology before and after correction

Explanation

Correct Answer

D:

The outcome check is to inspect MAC move logs and port topology before and after correction. It measures whether the stated requirement was met. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

Incorrect Answers

A:

The suggested check—inspect LLDP-MED advertisement and phone VLAN assignment—does not test the required result. Instead, inspect MAC move logs and port topology before and after correction.

B:

The suggested check—inspect stack member state and independent management identities—does not test the required result. Instead, inspect MAC move logs and port topology before and after correction.

C:

The suggested check—submit a mismatched ARP mapping and inspect drop counters—does not test the required result. Instead, inspect MAC move logs and port topology before and after correction.

Question 250

At a municipal public library system, the operations team reports that the same endpoint MAC alternates between two access ports and connectivity is unstable. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Configure a bounded mirror source and monitor destination for the affected interface
  2. Inspect MAC move logs and port topology before and after correction
  3. Test guest-to-guest denial while retaining approved gateway access
  4. Trace the physical loop or unauthorized bridge and review learned MAC movements
  5. Apply supported ARP inspection using valid bindings and trusted network ports

Explanation

Correct Answers

B:

The selected action is Inspect MAC move logs and port topology before and after correction. Its matching outcome check is to inspect MAC move logs and port topology before and after correction.

D:

The selected action is Trace the physical loop or unauthorized bridge and review learned MAC movements. Its matching outcome check is to inspect MAC move logs and port topology before and after correction.

Incorrect Answers

A:

The proposed alternative—configure a bounded mirror source and monitor destination for the affected interface—does not address this requirement. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

C:

The proposed alternative—test guest-to-guest denial while retaining approved gateway access—does not address this requirement. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

E:

The proposed alternative—apply supported ARP inspection using valid bindings and trusted network ports—does not address this requirement. Rapid MAC movement can signal a loop or multi-path attachment without a valid aggregate.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests