Cisco 400-007 Dumps
Cisco 400-007 Practice Test 38
Question 370
A network design team is assessing this customer situation: One campus core change currently requires a company-wide freeze because all sites share the same change domain. A fixed procurement ceiling rules out indefinite capacity overprovisioning. Which technical rationale best explains the proposed design choice under these constraints?
Answer & Explanations
Correct answer: B
The alternative principle is: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path. It instead explains this action: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. For the present requirement, the controlling mechanism is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
Modularity limits correlated operational impact without eliminating necessary inter-module connectivity. This explains the action: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. For the described facts—One campus core change currently requires a company-wide freeze because all sites share the same change domain—test the outcome through: A staged module maintenance test leaves unrelated applications within stated SLOs.
The alternative principle is: OSPF flooding domains and summary design affect CPU load, SPF frequency and fault propagation. It instead explains this action: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. For the present requirement, the controlling mechanism is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
The alternative principle is: Business expansion changes administrative domains, latency demands and allowed traffic paths. It instead explains this action: Define regional route, policy and service boundaries from business geography and data constraints. For the present requirement, the controlling mechanism is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
Question 371
A network design team is assessing this customer situation: One campus core change currently requires a company-wide freeze because all sites share the same change domain. A fixed procurement ceiling rules out indefinite capacity overprovisioning. Which failure is the most direct risk of taking the tempting design shortcut?
Answer & Explanations
Correct answer: C
The offered consequence belongs to the alternative control path: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. The relevant failure for the current situation is: One routine maintenance error can affect every campus building and critical service. The distinction follows from: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
The offered consequence belongs to the alternative control path: Design independently powered, physically separated paths with tested software and device fate boundaries. The relevant failure for the current situation is: One routine maintenance error can affect every campus building and critical service. The distinction follows from: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
One routine maintenance error can affect every campus building and critical service. That is the risk in the reported situation—One campus core change currently requires a company-wide freeze because all sites share the same change domain. The corrective action is: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. Technical basis: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
The offered consequence belongs to the alternative control path: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. The relevant failure for the current situation is: One routine maintenance error can affect every campus building and critical service. The distinction follows from: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
Question 372
A network design team is assessing this customer situation: One campus core change currently requires a company-wide freeze because all sites share the same change domain. A fixed procurement ceiling rules out indefinite capacity overprovisioning. Which prerequisite should the architect confirm before choosing and defending this design?
Answer & Explanations
Correct answer: D
The offered preparation belongs with the alternative action: Design independently powered, physically separated paths with tested software and device fate boundaries. Here the necessary starting condition is: Capture team ownership, outage windows, fault domains and cross-module service needs. It supports: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries.
The offered preparation belongs with the alternative action: Separate reusable intent modules from region variables and enforce code ownership and review contracts. Here the necessary starting condition is: Capture team ownership, outage windows, fault domains and cross-module service needs. It supports: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries.
The offered preparation belongs with the alternative action: Define regional route, policy and service boundaries from business geography and data constraints. Here the necessary starting condition is: Capture team ownership, outage windows, fault domains and cross-module service needs. It supports: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries.
The necessary starting condition is: Capture team ownership, outage windows, fault domains and cross-module service needs. This enables the action: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. Validate the result with: A staged module maintenance test leaves unrelated applications within stated SLOs.
Question 373
In a separate customer architecture review, this issue arises: A hospital group wants independent upgrades without risking life-critical networks. One site experiences high evening utilization, so average daytime counters may mislead. Which high-level network design choice most directly meets the stated technical and operational requirement?
Answer & Explanations
Correct answer: A
Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. The relevant technical reason is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity. Confirm through: A staged module maintenance test leaves unrelated applications within stated SLOs.
The alternative addresses: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Its principle is: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion. In this case the needed action is: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. Confirm by: A staged module maintenance test leaves unrelated applications within stated SLOs.
The alternative addresses a different technical concern: OSPF flooding domains and summary design affect CPU load, SPF frequency and fault propagation. The governing mechanism here is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity. Accordingly, use: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries.
Explicit go/no-go measurements allow reversible progress before hidden state diverges too far. That supports the alternative intervention: Define prechange snapshots, staged checkpoints and objective rollback triggers for each dependency. The present situation—A hospital group wants independent upgrades without risking life-critical networks—instead calls for: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. Technical basis: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
Question 374
In a separate customer architecture review, this issue arises: A hospital group wants independent upgrades without risking life-critical networks. One site experiences high evening utilization, so average daytime counters may mislead. Which technical rationale best explains the proposed design choice under these constraints?
Answer & Explanations
Correct answer: B
The alternative principle is: Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path. It instead explains this action: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. For the present requirement, the controlling mechanism is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity. The scenario is: A hospital group wants independent upgrades without risking life-critical networks.
Modularity limits correlated operational impact without eliminating necessary inter-module connectivity. This explains the action: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. For the described facts—A hospital group wants independent upgrades without risking life-critical networks—test the outcome through: A staged module maintenance test leaves unrelated applications within stated SLOs.
The alternative principle is: Smaller broadcast domains and loop controls constrain accidental Layer 2 topology changes. It instead explains this action: Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards. For the present requirement, the controlling mechanism is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
The alternative principle is: OSPF flooding domains and summary design affect CPU load, SPF frequency and fault propagation. It instead explains this action: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. For the present requirement, the controlling mechanism is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity. The scenario is: A hospital group wants independent upgrades without risking life-critical networks.
Question 375
In a separate customer architecture review, this issue arises: A hospital group wants independent upgrades without risking life-critical networks. One site experiences high evening utilization, so average daytime counters may mislead. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?
Answer & Explanations
Correct answer: C
The offered observation would test: Define prechange snapshots, staged checkpoints and objective rollback triggers for each dependency. It would not establish that the stated requirement has been met. The direct evidence needed here is: A staged module maintenance test leaves unrelated applications within stated SLOs.
The offered observation would test: Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards. It would not establish that the stated requirement has been met. The direct evidence needed here is: A staged module maintenance test leaves unrelated applications within stated SLOs.
Direct verification: A staged module maintenance test leaves unrelated applications within stated SLOs. This is the relevant evidence for the action: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. The reason is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity.
The offered observation would test: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. It would not establish that the stated requirement has been met. The direct evidence needed here is: A staged module maintenance test leaves unrelated applications within stated SLOs.
Question 376
In a separate customer architecture review, this issue arises: A hospital group wants independent upgrades without risking life-critical networks. One site experiences high evening utilization, so average daytime counters may mislead. Which prerequisite should the architect confirm before choosing and defending this design?
Answer & Explanations
Correct answer: D
The offered preparation belongs with the alternative action: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. Here the necessary starting condition is: Capture team ownership, outage windows, fault domains and cross-module service needs. It supports: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries.
The offered preparation belongs with the alternative action: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. Here the necessary starting condition is: Capture team ownership, outage windows, fault domains and cross-module service needs. It supports: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries.
The offered preparation belongs with the alternative action: Select a topology that provides loop-free alternates and verify fast reroute feasibility for critical destinations. Here the necessary starting condition is: Capture team ownership, outage windows, fault domains and cross-module service needs. It supports: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries.
The necessary starting condition is: Capture team ownership, outage windows, fault domains and cross-module service needs. This enables the action: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. Validate the result with: A staged module maintenance test leaves unrelated applications within stated SLOs. The scenario is: A hospital group wants independent upgrades without risking life-critical networks.
Question 377
A network design team is assessing this customer situation: Two redundant core chassis share the same power feed and software release fault exposure. An approved alternate path exists, but its cost and policy limits differ. Which high-level network design choice most directly meets the stated technical and operational requirement?
Answer & Explanations
Correct answer: A
Redundant device counts are insufficient when resources share correlated failure modes. For the documented situation—Two redundant core chassis share the same power feed and software release fault exposure—the targeted response is: Design independently powered, physically separated paths with tested software and device fate boundaries. Check: An intentional failure of one power or fabric domain preserves the defined critical flows.
The alternative addresses a different technical concern: Probabilistic prediction should not replace deterministic routing safety and change authorization. The governing mechanism here is: Redundant device counts are insufficient when resources share correlated failure modes. Accordingly, use: Design independently powered, physically separated paths with tested software and device fate boundaries.
OSPF flooding domains and summary design affect CPU load, SPF frequency and fault propagation. That supports the alternative intervention: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. The present situation—Two redundant core chassis share the same power feed and software release fault exposure—instead calls for: Design independently powered, physically separated paths with tested software and device fate boundaries. Technical basis: Redundant device counts are insufficient when resources share correlated failure modes.
The alternative addresses: Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards. Its principle is: Smaller broadcast domains and loop controls constrain accidental Layer 2 topology changes. In this case the needed action is: Design independently powered, physically separated paths with tested software and device fate boundaries. Confirm by: An intentional failure of one power or fabric domain preserves the defined critical flows.
Question 378
A network design team is assessing this customer situation: Two redundant core chassis share the same power feed and software release fault exposure. An approved alternate path exists, but its cost and policy limits differ. Which technical rationale best explains the proposed design choice under these constraints?
Answer & Explanations
Correct answer: B
The alternative principle is: OSPF flooding domains and summary design affect CPU load, SPF frequency and fault propagation. It instead explains this action: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. For the present requirement, the controlling mechanism is: Redundant device counts are insufficient when resources share correlated failure modes.
Redundant device counts are insufficient when resources share correlated failure modes. This explains the action: Design independently powered, physically separated paths with tested software and device fate boundaries. For the described facts—Two redundant core chassis share the same power feed and software release fault exposure—test the outcome through: An intentional failure of one power or fabric domain preserves the defined critical flows.
The alternative principle is: IS-IS hierarchy can keep detailed local topology from burdening the backbone while preserving needed reachability. It instead explains this action: Use L1/L2 boundaries and leak only policy-approved interlevel routes. For the present requirement, the controlling mechanism is: Redundant device counts are insufficient when resources share correlated failure modes.
The alternative principle is: Explicit go/no-go measurements allow reversible progress before hidden state diverges too far. It instead explains this action: Define prechange snapshots, staged checkpoints and objective rollback triggers for each dependency. For the present requirement, the controlling mechanism is: Redundant device counts are insufficient when resources share correlated failure modes.
Question 379
A network design team is assessing this customer situation: Two redundant core chassis share the same power feed and software release fault exposure. An approved alternate path exists, but its cost and policy limits differ. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?
Answer & Explanations
Correct answer: C
The offered observation would test: Implement documented local preference and community policy at controlled BGP boundaries. It would not establish that the stated requirement has been met. The direct evidence needed here is: An intentional failure of one power or fabric domain preserves the defined critical flows.
The offered observation would test: Translate business service tiers into differentiated routing, QoS and failover acceptance criteria. It would not establish that the stated requirement has been met. The direct evidence needed here is: An intentional failure of one power or fabric domain preserves the defined critical flows.
Direct verification: An intentional failure of one power or fabric domain preserves the defined critical flows. This is the relevant evidence for the action: Design independently powered, physically separated paths with tested software and device fate boundaries. The reason is: Redundant device counts are insufficient when resources share correlated failure modes.
The offered observation would test: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. It would not establish that the stated requirement has been met. The direct evidence needed here is: An intentional failure of one power or fabric domain preserves the defined critical flows.
Question 380
A network design team is assessing this customer situation: Two redundant core chassis share the same power feed and software release fault exposure. An approved alternate path exists, but its cost and policy limits differ. Which failure is the most direct risk of taking the tempting design shortcut?
Answer & Explanations
Correct answer: D
The offered consequence belongs to the alternative control path: Use L1/L2 boundaries and leak only policy-approved interlevel routes. The relevant failure for the current situation is: One common-mode event can remove both paths at once. The distinction follows from: Redundant device counts are insufficient when resources share correlated failure modes.
The offered consequence belongs to the alternative control path: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. The relevant failure for the current situation is: One common-mode event can remove both paths at once. The distinction follows from: Redundant device counts are insufficient when resources share correlated failure modes.
The offered consequence belongs to the alternative control path: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. The relevant failure for the current situation is: One common-mode event can remove both paths at once. The distinction follows from: Redundant device counts are insufficient when resources share correlated failure modes.
One common-mode event can remove both paths at once. That is the risk in the reported situation—Two redundant core chassis share the same power feed and software release fault exposure. The corrective action is: Design independently powered, physically separated paths with tested software and device fate boundaries. Technical basis: Redundant device counts are insufficient when resources share correlated failure modes.
Cisco Certified Design Expert (400-007) Practice Tests
- Cisco 400-007 Practice Test 36 - 10 Questions (Last Reviewed 14-Oct-2026)
- Cisco 400-007 Practice Test 37 - 10 Questions (Last Reviewed 13-Oct-2026)
- Cisco 400-007 Practice Test 38 - 10 Questions (Last Reviewed 12-Oct-2026)
- Cisco 400-007 Practice Test 39 - 10 Questions (Last Reviewed 11-Oct-2026)
- Cisco 400-007 Practice Test 40 - 10 Questions (Last Reviewed 10-Oct-2026)