Practice Exams:

Network Appliance NS0-165 Dumps

EXAM: NetApp Certified Data Administrator, ONTAP
Verified By Experts
Premium Bundle
$49.99

NS0-165 Premium ETE File


  • Premium File 60 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Network Appliance NS0-165 Practice Test 27

Question 260

An administrator creates a new department's SVM and checks that its NFS exports cannot expose another department's volumes. Which action and validation evidence belong together?

  1. Action: Delegate protocol and volume operations to an SVM administrator while protecting global cluster, node and security settings. Validation: Validate a tenant operator can create an approved volume but cannot modify another SVM's network or cluster-wide administrator identities.
  2. Action: Assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. Validation: Use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.
  3. Action: Plan SVM and cluster peering and appropriate protection configuration before setting up SVM disaster recovery or cross-cluster data services. Validation: Verify the approved peer identities and test an authorized non-sensitive SVM replication relationship with the expected network path.
  4. Action: Create separate storage virtual machines for approved protocol service, name-space and administrative isolation requirements. Validation: Verify volumes, LIFs, protocol services and scoped administration appear within the intended SVM while another tenant stays inaccessible.

Explanation

Correct Answer

D:

The situation is that an administrator creates a new department's SVM and checks that its NFS exports cannot expose another department's volumes. Create separate storage virtual machines for approved protocol service, name-space and administrative isolation requirements. Validation: Verify volumes, LIFs, protocol services and scoped administration appear within the intended SVM while another tenant stays inaccessible. The action and test belong together because an SVM groups client-serving protocols and logical interfaces without being a physical controller or independent HA pair.

Incorrect Answers

A:

That action-and-evidence pair concerns “separate svm administration from cluster-wide functions”, not this decision. The appropriate action is to create separate storage virtual machines for approved protocol service, name-space and administrative isolation requirements. To confirm, verify volumes, LIFs, protocol services and scoped administration appear within the intended SVM while another tenant stays inaccessible.

B:

The proposed pair focuses on “plan svm data lif placement and mobility around client requirements” instead. The appropriate action is to create separate storage virtual machines for approved protocol service, name-space and administrative isolation requirements. To confirm, verify volumes, LIFs, protocol services and scoped administration appear within the intended SVM while another tenant stays inaccessible.

C:

“use svm peering and replication with separate security approval” evaluates a different intervention. The appropriate action is to create separate storage virtual machines for approved protocol service, name-space and administrative isolation requirements. To confirm, verify volumes, LIFs, protocol services and scoped administration appear within the intended SVM while another tenant stays inaccessible.

Question 261

For this ONTAP storage administration case, A department can list its SVM volumes in System Manager but all SMB mounts fail from the intended application subnet. What is the most appropriate next decision?

  1. Assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance.
  2. Plan SVM and cluster peering and appropriate protection configuration before setting up SVM disaster recovery or cross-cluster data services.
  3. Create separate storage virtual machines for approved protocol service, name-space and administrative isolation requirements.
  4. Delegate protocol and volume operations to an SVM administrator while protecting global cluster, node and security settings.

Explanation

Correct Answer

A:

Assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy. To verify, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

Incorrect Answers

B:

“use svm peering and replication with separate security approval” is related to another task, not the failure shown here. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

C:

This alternative focuses on “use svms for storage service and administration boundaries” instead of the required outcome. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

D:

That choice concerns “separate svm administration from cluster-wide functions”, not the immediate requirement. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Question 262

A department can list its SVM volumes in System Manager but all SMB mounts fail from the intended application subnet. Why does the recommended approach address this particular concern?

  1. Logical isolation remains important when connecting two clusters; peering trust and replication policy are not automatically created by naming an SVM.
  2. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.
  3. An SVM groups client-serving protocols and logical interfaces without being a physical controller or independent HA pair.
  4. SVM-scoped operations do not imply permission to change shared hardware or all other SVM tenants.

Explanation

Correct Answer

B:

SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy. This supports the decision to assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance.

Incorrect Answers

A:

The principle behind “use svm peering and replication with separate security approval” is not the one being tested. Here, SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

C:

“use svms for storage service and administration boundaries” explains a different mechanism. Here, SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

D:

That statement concerns “separate svm administration from cluster-wide functions” rather than the cause in this case. Here, SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Question 263

A department can list its SVM volumes in System Manager but all SMB mounts fail from the intended application subnet. Which evidence best validates the proposed outcome?

  1. Verify volumes, LIFs, protocol services and scoped administration appear within the intended SVM while another tenant stays inaccessible.
  2. Verify the approved peer identities and test an authorized non-sensitive SVM replication relationship with the expected network path.
  3. Use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.
  4. Validate a tenant operator can create an approved volume but cannot modify another SVM's network or cluster-wide administrator identities.

Explanation

Correct Answer

C:

Use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover. It is the relevant test because SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Incorrect Answers

A:

“use svms for storage service and administration boundaries” would verify a different part of the system. To check this result, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

B:

That test concerns “use svm peering and replication with separate security approval”, not the requested outcome. To check this result, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

D:

This evidence addresses “separate svm administration from cluster-wide functions” instead of confirming the repair. To check this result, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

Question 264

Consider this situation: A department can list its SVM volumes in System Manager but all SMB mounts fail from the intended application subnet. A team member suggests: "Configure the new tenant's service only on a management LIF and promise that clients can mount data through it." What is the main risk?

  1. A narrowly scoped change request can expose shared storage administration and other customers' data.
  2. The supposed standby may lack current data, required protocol settings or authorized connectivity.
  3. Client access and operator permissions can cross logical tenant boundaries unexpectedly.
  4. The storage resources may be healthy but clients cannot reach the actual data service network.

Explanation

Correct Answer

D:

The storage resources may be healthy but clients cannot reach the actual data service network. The shortcut is unsafe because SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Incorrect Answers

A:

That consequence concerns “A narrowly scoped change request can expose shared storage administration and other customers' data”, which is a different failure. Here, the storage resources may be healthy but clients cannot reach the actual data service network.

B:

“The supposed standby may lack current data, required protocol settings or authorized connectivity” does not describe the result of this shortcut. Here, the storage resources may be healthy but clients cannot reach the actual data service network.

C:

The alternative risk relates to “Client access and operator permissions can cross logical tenant boundaries unexpectedly”, not the stated mistake. Here, the storage resources may be healthy but clients cannot reach the actual data service network.

Question 265

A storage operations lead considers: A department can list its SVM volumes in System Manager but all SMB mounts fail from the intended application subnet. Which response and evidence should be linked?

  1. Action: Assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. Validation: Use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.
  2. Action: Delegate protocol and volume operations to an SVM administrator while protecting global cluster, node and security settings. Validation: Validate a tenant operator can create an approved volume but cannot modify another SVM's network or cluster-wide administrator identities.
  3. Action: Set supported SVM DNS, NIS or LDAP and directory dependencies for NFS or SMB identity resolution and record the external service reachability. Validation: Test a synthetic user lookup and a harmless client access attempt while verifying SVM DNS servers and directory status.
  4. Action: Plan SVM and cluster peering and appropriate protection configuration before setting up SVM disaster recovery or cross-cluster data services. Validation: Verify the approved peer identities and test an authorized non-sensitive SVM replication relationship with the expected network path.

Explanation

Correct Answer

A:

Assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. Validation: Use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover. The action and test belong together because SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Incorrect Answers

B:

“separate svm administration from cluster-wide functions” evaluates a different intervention. The appropriate action is to assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. To confirm, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

C:

The linked action and check for “configure svm DNS and name service integration deliberately” would not resolve this case. The appropriate action is to assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. To confirm, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

D:

That action-and-evidence pair concerns “use svm peering and replication with separate security approval”, not this decision. The appropriate action is to assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. To confirm, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

Question 266

A storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. Which action best addresses this requirement?

  1. Plan SVM and cluster peering and appropriate protection configuration before setting up SVM disaster recovery or cross-cluster data services.
  2. Assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance.
  3. Set supported SVM DNS, NIS or LDAP and directory dependencies for NFS or SMB identity resolution and record the external service reachability.
  4. Create separate storage virtual machines for approved protocol service, name-space and administrative isolation requirements.

Explanation

Correct Answer

B:

The situation is that a storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. Assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy. To verify, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

Incorrect Answers

A:

The situation is that a storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. “use svm peering and replication with separate security approval” is related to another task, not the failure shown here. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

C:

That choice concerns “configure svm DNS and name service integration deliberately”, not the immediate requirement. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

D:

The proposed action addresses “use svms for storage service and administration boundaries” rather than the problem described. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Question 267

A NetApp storage engineer considers: A storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. Which underlying principle applies?

  1. A local HA pair does not by itself ensure a separate-site recoverable copy or acceptable geographic recovery targets.
  2. Name service failures can appear as storage authorization problems when client identities or directory service lookups do not resolve.
  3. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.
  4. Logical isolation remains important when connecting two clusters; peering trust and replication policy are not automatically created by naming an SVM.

Explanation

Correct Answer

C:

The situation is that a storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy. This supports the decision to assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance.

Incorrect Answers

A:

“understand local ha versus site-level disaster recovery” describes another technical distinction. Here, SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

B:

“configure svm DNS and name service integration deliberately” explains a different mechanism. Here, SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

D:

The situation is that a storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. The principle behind “use svm peering and replication with separate security approval” is not the one being tested. Here, SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Question 268

A storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. What should the team examine before accepting the result?

  1. Test a synthetic user lookup and a harmless client access attempt while verifying SVM DNS servers and directory status.
  2. Verify the approved peer identities and test an authorized non-sensitive SVM replication relationship with the expected network path.
  3. Validate a tenant operator can create an approved volume but cannot modify another SVM's network or cluster-wide administrator identities.
  4. Use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

Explanation

Correct Answer

D:

The situation is that a storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. Use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover. It is the relevant test because SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Incorrect Answers

A:

That test concerns “configure svm DNS and name service integration deliberately”, not the requested outcome. To check this result, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

B:

The proposed check is relevant to “use svm peering and replication with separate security approval”, but not sufficient here. To check this result, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

C:

The situation is that a storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. This evidence addresses “separate svm administration from cluster-wide functions” instead of confirming the repair. To check this result, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

Question 269

A storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. The proposed shortcut is: "Configure the new tenant's service only on a management LIF and promise that clients can mount data through it." Which failure is most likely?

  1. The storage resources may be healthy but clients cannot reach the actual data service network.
  2. A routine support action can modify unrelated tenants or erase the ability to attribute a risky change.
  3. Authentication and identity mapping can fail while volume health and physical capacity remain normal.
  4. A narrowly scoped change request can expose shared storage administration and other customers' data.

Explanation

Correct Answer

A:

The situation is that a storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. The storage resources may be healthy but clients cannot reach the actual data service network. The shortcut is unsafe because SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Incorrect Answers

B:

The alternative risk relates to “A routine support action can modify unrelated tenants or erase the ability to attribute a risky…”, not the stated mistake. Here, the storage resources may be healthy but clients cannot reach the actual data service network.

C:

“Authentication and identity mapping can fail while volume health and physical capacity remain normal” can arise elsewhere, but it is not the most direct risk here. Here, the storage resources may be healthy but clients cannot reach the actual data service network.

D:

The situation is that a storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. That consequence concerns “A narrowly scoped change request can expose shared storage administration and other customers' data”, which is a different failure. Here, the storage resources may be healthy but clients cannot reach the actual data service network.

Question 270

For this case—A storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses.—which implementation and acceptance check are correctly paired?

  1. Action: Set supported SVM DNS, NIS or LDAP and directory dependencies for NFS or SMB identity resolution and record the external service reachability. Validation: Test a synthetic user lookup and a harmless client access attempt while verifying SVM DNS servers and directory status.
  2. Action: Assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. Validation: Use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.
  3. Action: Create separate storage virtual machines for approved protocol service, name-space and administrative isolation requirements. Validation: Verify volumes, LIFs, protocol services and scoped administration appear within the intended SVM while another tenant stays inaccessible.
  4. Action: Plan SVM and cluster peering and appropriate protection configuration before setting up SVM disaster recovery or cross-cluster data services. Validation: Verify the approved peer identities and test an authorized non-sensitive SVM replication relationship with the expected network path.

Explanation

Correct Answer

B:

The situation is that a storage engineer plans NAS failover for a tenant and must choose reachable data ports rather than relying on cluster management addresses. Assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. Validation: Use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover. The action and test belong together because SVM namespace objects do not grant client connectivity when data LIFs use the wrong address, subnet or port policy.

Incorrect Answers

A:

“configure svm DNS and name service integration deliberately” evaluates a different intervention. The appropriate action is to assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. To confirm, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

C:

That action-and-evidence pair concerns “use svms for storage service and administration boundaries”, not this decision. The appropriate action is to assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. To confirm, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

D:

The proposed pair focuses on “use svm peering and replication with separate security approval” instead. The appropriate action is to assign appropriate NAS or SAN data LIFs to the correct SVM, ports and networking domains, following protocol-specific failover guidance. To confirm, use approved client tests to confirm the intended LIF address serves the correct protocol and remains reachable after a supported failover.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests