HP HPE7-A01 Dumps
HP HPE7-A01 Practice Test 75
Question 740
At an international convention venue, the wireless support team reports that security teams need to inspect the ingress frames of a suspected misconfigured wired endpoint. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Confirm captured source MAC, VLAN tag and protocol fields. Its matching outcome check is to confirm captured source MAC, VLAN tag and protocol fields.
The selected action is Configure scoped switch port mirroring to an authorized packet analyzer. Its matching outcome check is to confirm captured source MAC, VLAN tag and protocol fields.
Incorrect Answers
The proposed alternative—reconcile unique device IDs and the API total across all pages—does not address this requirement. SPAN captures traffic from the correct observation point without changing forwarding.
The proposed alternative—correlate shared root-cause events while retaining independently meaningful symptoms—does not address this requirement. SPAN captures traffic from the correct observation point without changing forwarding.
For the paired action and proof, the proposed alternative—review association, roaming, RADIUS and DHCP events for that client timeline—does not address this requirement. SPAN captures traffic from the correct observation point without changing forwarding
Question 741
At an airport administration network, the wireless engineering team reports that access switches show intermittent degraded performance but no current alarms. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Trend CRC, discards, speed and link transitions for the affected ports. Longitudinal counters reveal intermittent physical or congestion faults. Confirm the result using this test: Compare timestamped counter changes with user reports.
Incorrect Answers
The proposed alternative—configure scoped switch port mirroring to an authorized packet analyzer—does not address the current failure. Instead, trend CRC, discards, speed and link transitions for the affected ports.
The proposed alternative—establish repeatable client, channel and upstream latency baselines across representative periods—does not address the current failure. Instead, trend CRC, discards, speed and link transitions for the affected ports.
The proposed alternative—place a supported UXI sensor near the affected user path and run representative tests—does not address the current failure. Instead, trend CRC, discards, speed and link transitions for the affected ports.
Question 742
At an airport administration network, the wireless engineering team reports that access switches show intermittent degraded performance but no current alarms. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to clear all interface counters repeatedly without preserving baseline evidence. The corrective choice is: Trend CRC, discards, speed and link transitions for the affected ports.
Incorrect Answers
The shortcut to assume the first successful HTTP response contains every campus device is not the error in this case. The actual risk comes from clear all interface counters repeatedly without preserving baseline evidence.
The shortcut to delete all downstream alerts without verifying their common cause is not the error in this case. The actual risk comes from clear all interface counters repeatedly without preserving baseline evidence.
The shortcut to mirror an unrelated uplink and claim it represents the endpoint's packets is not the error in this case. The actual risk comes from clear all interface counters repeatedly without preserving baseline evidence.
Question 743
At an airport administration network, the wireless engineering team reports that access switches show intermittent degraded performance but no current alarms. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
Longitudinal counters reveal intermittent physical or congestion faults. This is the technical reason behind the proposed approach: “Trend CRC, discards, speed and link transitions for the affected ports”. The result should be checked by “Compare timestamped counter changes with user reports”.
Incorrect Answers
The proposed alternative—client-centric event correlation is more diagnostic than global AP uptime—does not address the current failure. Instead, trend CRC, discards, speed and link transitions for the affected ports.
The proposed alternative—event correlation can reduce alert fatigue without hiding root-cause evidence—does not address the current failure. Instead, trend CRC, discards, speed and link transitions for the affected ports.
The proposed alternative—a baseline diff identifies precise unauthorized or unplanned modifications—does not address the current failure. Instead, trend CRC, discards, speed and link transitions for the affected ports.
Question 744
At an airport administration network, the wireless engineering team reports that access switches show intermittent degraded performance but no current alarms. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to compare timestamped counter changes with user reports. It measures whether the stated requirement was met.
Incorrect Answers
The suggested check—recompute configuration differences and link them to signed change records—does not test the required result. Instead, compare timestamped counter changes with user reports.
The suggested check—compare server offsets and event timestamps from both buildings—does not test the required result. Instead, compare timestamped counter changes with user reports.
The suggested check—reproduce a bounded link flap and review captured counters and timestamps—does not test the required result. Instead, compare timestamped counter changes with user reports.
Question 745
At an airport administration network, the wireless engineering team reports that access switches show intermittent degraded performance but no current alarms. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Compare timestamped counter changes with user reports. Its matching outcome check is to compare timestamped counter changes with user reports.
The selected action is Trend CRC, discards, speed and link transitions for the affected ports. Its matching outcome check is to compare timestamped counter changes with user reports.
Incorrect Answers
The proposed alternative—induce an approved production alert and verify correct routing to staff—does not address the current failure. Instead, trend CRC, discards, speed and link transitions for the affected ports.
For the paired action and proof, the proposed alternative—establish repeatable client, channel and upstream latency baselines across representative periods—does not address the current failure. Instead, trend CRC, discards, speed and link transitions for the affected ports
The proposed alternative—synchronize network clocks with approved NTP sources and validate timezone display—does not address the current failure. Instead, trend CRC, discards, speed and link transitions for the affected ports.
Question 746
At a public utility operations center, the network engineering team reports that the operations dashboard sends repeated alerts for lab devices but misses production AP outages. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Review site groups, alert rules and device membership in the central platform. Monitoring scope must match critical devices and service priorities. Confirm the result using this test: Induce an approved production alert and verify correct routing to staff.
Incorrect Answers
The proposed alternative—trend CRC, discards, speed and link transitions for the affected ports—does not address this requirement. Monitoring scope must match critical devices and service priorities.
The proposed alternative—deploy an approved NAE monitoring rule to capture the affected counters and event context—does not address this requirement. Monitoring scope must match critical devices and service priorities.
The proposed alternative—correlate shared root-cause events while retaining independently meaningful symptoms—does not address this requirement. Monitoring scope must match critical devices and service priorities.
Question 747
At a public utility operations center, the network engineering team reports that the operations dashboard sends repeated alerts for lab devices but misses production AP outages. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to suppress all access-point alerts to reduce notification volume. Monitoring scope must match critical devices and service priorities. The corrective choice is: Review site groups, alert rules and device membership in the central platform.
Incorrect Answers
The shortcut to delete all downstream alerts without verifying their common cause is not the error in this case. The actual risk comes from suppress all access-point alerts to reduce notification volume.
The shortcut to change only an incident-ticket timestamp and treat network clocks as corrected is not the error in this case. The actual risk comes from suppress all access-point alerts to reduce notification volume.
The shortcut to assume the first successful HTTP response contains every campus device is not the error in this case. The actual risk comes from suppress all access-point alerts to reduce notification volume.
Question 748
At a public utility operations center, the network engineering team reports that the operations dashboard sends repeated alerts for lab devices but misses production AP outages. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
Monitoring scope must match critical devices and service priorities. This is the technical reason behind the proposed approach: “Review site groups, alert rules and device membership in the central platform”. The result should be checked by “Induce an approved production alert and verify correct routing to staff”.
Incorrect Answers
The proposed alternative—sPAN captures traffic from the correct observation point without changing forwarding—does not address this requirement. Monitoring scope must match critical devices and service priorities.
The proposed alternative—client-centric event correlation is more diagnostic than global AP uptime—does not address this requirement. Monitoring scope must match critical devices and service priorities.
The proposed alternative—consistent time is necessary for reliable cross-device event correlation—does not address this requirement. Monitoring scope must match critical devices and service priorities.
Question 749
At a public utility operations center, the network engineering team reports that the operations dashboard sends repeated alerts for lab devices but misses production AP outages. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to induce an approved production alert and verify correct routing to staff. It measures whether the stated requirement was met. Monitoring scope must match critical devices and service priorities.
Incorrect Answers
The proposed alternative—reconstruct one client's authentication and roam chronology—does not address this requirement. Monitoring scope must match critical devices and service priorities.
The proposed alternative—compare sensor DNS, authentication and application result history—does not address this requirement. Monitoring scope must match critical devices and service priorities.
The proposed alternative—recompute configuration differences and link them to signed change records—does not address this requirement. Monitoring scope must match critical devices and service priorities.
Question 750
At a public utility operations center, the network engineering team reports that the operations dashboard sends repeated alerts for lab devices but misses production AP outages. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Induce an approved production alert and verify correct routing to staff.
The selected action is Review site groups, alert rules and device membership in the central platform.
Incorrect Answers
The proposed alternative—compare throughput, utilization and latency at similar load levels—does not address this requirement. Monitoring scope must match critical devices and service priorities.
The proposed alternative—compare versioned configuration snapshots with a recorded change ID—does not address this requirement. Monitoring scope must match critical devices and service priorities.
For the paired action and proof, the proposed alternative—deploy an approved NAE monitoring rule to capture the affected counters and event context—does not address this requirement. Monitoring scope must match critical devices and service priorities
HPE Network Campus Access Professional (HPE7-A01) Practice Tests
- HP HPE7-A01 Practice Test 73 - 10 Questions (Last Reviewed 03-Nov-2026)
- HP HPE7-A01 Practice Test 74 - 10 Questions (Last Reviewed 02-Nov-2026)
- HP HPE7-A01 Practice Test 75 - 10 Questions (Last Reviewed 01-Nov-2026)
- HP HPE7-A01 Practice Test 76 - 10 Questions (Last Reviewed 31-Oct-2026)
- HP HPE7-A01 Practice Test 77 - 10 Questions (Last Reviewed 30-Oct-2026)