HP HPE7-A01 Dumps
HP HPE7-A01 Practice Test 43
Question 420
At a multi-floor office campus, the campus engineering team reports that a thick concrete wall causes a persistent dead zone despite nearby access points. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Reposition or add AP coverage based on measured attenuation and cell overlap.
The selected action is Survey signal and SNR on both sides of the wall.
Incorrect Answers
The proposed alternative—measure broadcast airtime and verify required service discovery—does not address this requirement. Building materials alter RF paths and cannot be corrected by SSID naming.
The proposed alternative—confirm 6 GHz radio capability and security requirements before migrating those clients—does not address this requirement. Building materials alter RF paths and cannot be corrected by SSID naming.
The proposed alternative—assess wireless mesh backhaul health and hop count separately from client access—does not address this requirement. Building materials alter RF paths and cannot be corrected by SSID naming.
Question 421
At a logistics and warehousing campus, the access-network team reports that dual-band devices stay on a congested 2.4 GHz radio despite usable 5 GHz coverage. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Tune supported band steering and client capability policies without blocking legacy devices. Band steering should favor capable clients while preserving compatibility. Confirm the result using this test: Compare association band, join success and throughput by client class.
Incorrect Answers
The proposed alternative—select supported bridged or tunneled user traffic placement aligned with policy—does not address this requirement. Tune supported band steering and client capability policies without blocking legacy devices.
The proposed alternative—inspect DFS events and select a compliant channel strategy for the site—does not address this requirement. Tune supported band steering and client capability policies without blocking legacy devices.
The proposed alternative—select appropriately non-overlapping channels and verify regulatory constraints—does not address this requirement. Tune supported band steering and client capability policies without blocking legacy devices.
Question 422
At a logistics and warehousing campus, the access-network team reports that dual-band devices stay on a congested 2.4 GHz radio despite usable 5 GHz coverage. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to disable 2.4 GHz globally before checking whether all devices support 5 GHz. Tune supported band steering and client capability policies without blocking legacy devices. The corrective choice is: Tune supported band steering and client capability policies without blocking legacy devices.
Incorrect Answers
The shortcut to increase all AP transmit powers and assume same-channel contention disappears is not the error in this case. The actual risk comes from disable 2.4 GHz globally before checking whether all devices support 5 GHz.
The shortcut to raise 5 GHz EIRP to convert a 2.4 GHz-only radio into a dual-band device is not the error in this case. The actual risk comes from disable 2.4 GHz globally before checking whether all devices support 5 GHz.
The shortcut to disable regulatory DFS behavior to maintain one fixed channel is not the error in this case. The actual risk comes from disable 2.4 GHz globally before checking whether all devices support 5 GHz.
Question 423
At a logistics and warehousing campus, the access-network team reports that dual-band devices stay on a congested 2.4 GHz radio despite usable 5 GHz coverage. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
Band steering should favor capable clients while preserving compatibility. This is the technical reason behind the proposed approach: “Tune supported band steering and client capability policies without blocking legacy devices”. The result should be checked by “Compare association band, join success and throughput by client class”.
Incorrect Answers
The proposed alternative—enterprise authentication requires a reachable authorization service—does not address this requirement. Tune supported band steering and client capability policies without blocking legacy devices.
The proposed alternative—aPs on the same channel share airtime even if each advertises a different SSID—does not address this requirement. Tune supported band steering and client capability policies without blocking legacy devices.
The proposed alternative—radio airtime, not raw frame count, is the shared resource—does not address this requirement. Tune supported band steering and client capability policies without blocking legacy devices.
Question 424
At a logistics and warehousing campus, the access-network team reports that dual-band devices stay on a congested 2.4 GHz radio despite usable 5 GHz coverage. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to compare association band, join success and throughput by client class. It measures whether the stated requirement was met. Tune supported band steering and client capability policies without blocking legacy devices.
Incorrect Answers
The suggested check—compare station distribution and effective throughput after RF tuning—does not test the required result. Instead, compare association band, join success and throughput by client class.
The suggested check—measure RSSI, SNR and roaming at representative user locations—does not test the required result. Instead, compare association band, join success and throughput by client class.
The suggested check—compare airtime consumption and application performance per client class—does not test the required result. Instead, compare association band, join success and throughput by client class.
Question 425
At a logistics and warehousing campus, the access-network team reports that dual-band devices stay on a congested 2.4 GHz radio despite usable 5 GHz coverage. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Tune supported band steering and client capability policies without blocking legacy devices. Its matching outcome check is to compare association band, join success and throughput by client class.
The selected action is Compare association band, join success and throughput by client class. Its matching outcome check is to compare association band, join success and throughput by client class.
Incorrect Answers
The proposed alternative—trace guest DNS, redirect and final access role—does not address this requirement. Tune supported band steering and client capability policies without blocking legacy devices.
The proposed alternative—check the supplicant's trusted CA and the server-certificate name against policy—does not address this requirement. Tune supported band steering and client capability policies without blocking legacy devices.
The proposed alternative—validate predictive RF design through an active post-installation site survey—does not address this requirement. Tune supported band steering and client capability policies without blocking legacy devices.
Question 426
At a municipal public library system, the operations team reports that slow legacy clients consume excessive wireless airtime in a mixed-speed training hall. Which configuration or operating decision most directly addresses the issue?
Explanation
Correct Answer
Evaluate supported airtime-fairness settings against the service requirements. Radio airtime, not raw frame count, is the shared resource. Confirm the result using this test: Compare airtime consumption and application performance per client class.
Incorrect Answers
The proposed alternative—review client roaming behavior and radio design rather than force uncontrolled disconnects—does not address the current failure. Instead, evaluate supported airtime-fairness settings against the service requirements.
The proposed alternative—balance AP transmit power against client capabilities and the target cell size—does not address the current failure. Instead, evaluate supported airtime-fairness settings against the service requirements.
The proposed alternative—use supported BSS transition management while respecting client choice—does not address the current failure. Instead, evaluate supported airtime-fairness settings against the service requirements.
Question 427
At a municipal public library system, the operations team reports that slow legacy clients consume excessive wireless airtime in a mixed-speed training hall. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?
Explanation
Correct Answer
The shortcut at issue is to assume equal packet counts ensure equal airtime for fast and slow clients. The corrective choice is: Evaluate supported airtime-fairness settings against the service requirements.
Incorrect Answers
The shortcut to increase client-side IP MTU to correct an antenna coverage null is not the error in this case. The actual risk comes from assuming equal packet counts ensure equal airtime for fast and slow clients.
The shortcut to disable all nearby APs so the tablet must remain on one distant radio is not the error in this case. The actual risk comes from assuming equal packet counts ensure equal airtime for fast and slow clients.
The shortcut to raise 5 GHz EIRP to convert a 2.4 GHz-only radio into a dual-band device is not the error in this case. The actual risk comes from assuming equal packet counts ensure equal airtime for fast and slow clients.
Question 428
At a municipal public library system, the operations team reports that slow legacy clients consume excessive wireless airtime in a mixed-speed training hall. Which technical reasoning most specifically justifies the recommended solution?
Explanation
Correct Answer
Radio airtime, not raw frame count, is the shared resource. This is the technical reason behind the proposed approach: “Evaluate supported airtime-fairness settings against the service requirements”. The result should be checked by “Compare airtime consumption and application performance per client class”.
Incorrect Answers
The proposed alternative—directional antennas shape RF energy; mounting orientation matters—does not address the current failure. Instead, evaluate supported airtime-fairness settings against the service requirements.
The proposed alternative—6 GHz support depends on client radios and compatible modern security modes—does not address the current failure. Instead, evaluate supported airtime-fairness settings against the service requirements.
The proposed alternative—real obstacles and device placement can differ from planning assumptions—does not address the current failure. Instead, evaluate supported airtime-fairness settings against the service requirements.
Question 429
At a municipal public library system, the operations team reports that slow legacy clients consume excessive wireless airtime in a mixed-speed training hall. Which test would most directly show that the requested outcome was achieved?
Explanation
Correct Answer
The outcome check is to compare airtime consumption and application performance per client class. It measures whether the stated requirement was met.
Incorrect Answers
The suggested check—verify resulting role, VLAN and allowed resources for both identities—does not test the required result. Instead, compare airtime consumption and application performance per client class.
The suggested check—measure RSSI, SNR and roaming at representative user locations—does not test the required result. Instead, compare airtime consumption and application performance per client class.
The suggested check—time authentication exchanges and voice continuity across roam events—does not test the required result. Instead, compare airtime consumption and application performance per client class.
Question 430
At a municipal public library system, the operations team reports that slow legacy clients consume excessive wireless airtime in a mixed-speed training hall. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.
Explanation
Correct Answers
The selected action is Compare airtime consumption and application performance per client class. Its matching outcome check is to compare airtime consumption and application performance per client class.
The selected action is Evaluate supported airtime-fairness settings against the service requirements. Its matching outcome check is to compare airtime consumption and application performance per client class.
Incorrect Answers
The proposed alternative—compare aggregate cell throughput and co-channel utilization—does not address the current failure. Instead, evaluate supported airtime-fairness settings against the service requirements.
The proposed alternative—review radio coverage and supported client steering or minimum RSSI settings—does not address the current failure. Instead, evaluate supported airtime-fairness settings against the service requirements.
The proposed alternative—evaluate supported fast transition security with handset compatibility testing—does not address the current failure. Instead, evaluate supported airtime-fairness settings against the service requirements.
HPE Network Campus Access Professional (HPE7-A01) Practice Tests
- HP HPE7-A01 Practice Test 41 - 10 Questions (Last Reviewed 09-Oct-2026)
- HP HPE7-A01 Practice Test 42 - 10 Questions (Last Reviewed 08-Oct-2026)
- HP HPE7-A01 Practice Test 43 - 10 Questions (Last Reviewed 07-Oct-2026)
- HP HPE7-A01 Practice Test 44 - 10 Questions (Last Reviewed 06-Oct-2026)
- HP HPE7-A01 Practice Test 45 - 10 Questions (Last Reviewed 05-Oct-2026)