Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 37

Question 360

At a large school district, the IT team reports that one AP serves many slow edge clients while the adjacent AP remains lightly used. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Compare station distribution and effective throughput after RF tuning
  2. Validate RADIUS reachability and configured failover behavior before altering the passphrase
  3. Check approved display discovery and denied unrelated services
  4. Review radio coverage and supported client steering or minimum RSSI settings
  5. Evaluate supported airtime-fairness settings against the service requirements

Explanation

Correct Answers

A:

The selected action is Compare station distribution and effective throughput after RF tuning. Its matching outcome check is to compare station distribution and effective throughput after RF tuning.

D:

The selected action is Review radio coverage and supported client steering or minimum RSSI settings. Its matching outcome check is to compare station distribution and effective throughput after RF tuning.

Incorrect Answers

B:

The proposed alternative—validate RADIUS reachability and configured failover behavior before altering the passphrase—does not address this requirement. Client distribution depends on usable coverage and the station's roaming policy.

C:

The proposed alternative—check approved display discovery and denied unrelated services—does not address this requirement. Client distribution depends on usable coverage and the station's roaming policy.

E:

The proposed alternative—evaluate supported airtime-fairness settings against the service requirements—does not address this requirement. Client distribution depends on usable coverage and the station's roaming policy.

Question 361

At a regional hospital network, the network team reports that a 5 GHz AP switches channels unexpectedly and some clients reconnect slowly. Which configuration or operating decision most directly addresses the issue?

  1. Tune supported band steering and client capability policies without blocking legacy devices
  2. Balance AP transmit power against client capabilities and the target cell size
  3. Inspect DFS events and select a compliant channel strategy for the site
  4. Investigate hidden-node behavior and targeted RF or RTS/CTS controls

Explanation

Correct Answer

C:

Inspect DFS events and select a compliant channel strategy for the site. Radar detection requires departure from affected DFS channels when applicable. Confirm the result using this test: Correlate radar events with channel moves and client outage duration.

Incorrect Answers

A:

The proposed alternative—tune supported band steering and client capability policies without blocking legacy devices—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

B:

The proposed alternative—balance AP transmit power against client capabilities and the target cell size—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

D:

The proposed alternative—investigate hidden-node behavior and targeted RF or RTS/CTS controls—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

Question 362

At a regional hospital network, the network team reports that a 5 GHz AP switches channels unexpectedly and some clients reconnect slowly. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume 802.11k forces all clients to roam at the same threshold
  2. Disable 2.4 GHz globally before checking whether all devices support 5 GHz
  3. Disable regulatory DFS behavior to maintain one fixed channel
  4. Increase all AP transmit powers and assume same-channel contention disappears

Explanation

Correct Answer

C:

The shortcut at issue is to disable regulatory DFS behavior to maintain one fixed channel. Radar detection requires departure from affected DFS channels when applicable. The corrective choice is: Inspect DFS events and select a compliant channel strategy for the site.

Incorrect Answers

A:

The shortcut to assume 802.11k forces all clients to roam at the same threshold is not the error in this case. The actual risk comes from disable regulatory DFS behavior to maintain one fixed channel.

B:

The shortcut to disable 2.4 GHz globally before checking whether all devices support 5 GHz is not the error in this case. The actual risk comes from disable regulatory DFS behavior to maintain one fixed channel.

D:

The shortcut to increase all AP transmit powers and assume same-channel contention disappears is not the error in this case. The actual risk comes from disable regulatory DFS behavior to maintain one fixed channel.

Question 363

At a regional hospital network, the network team reports that a 5 GHz AP switches channels unexpectedly and some clients reconnect slowly. Which technical reasoning most specifically justifies the recommended solution?

  1. Radar detection requires departure from affected DFS channels when applicable
  2. Neighbor information can reduce blind scans for compatible clients
  3. Mutual certificate-based authentication requires valid, trusted certificate identities
  4. Low-rate broadcast traffic can consume disproportionate WLAN airtime

Explanation

Correct Answer

A:

Radar detection requires departure from affected DFS channels when applicable. This is the technical reason behind the proposed approach: “Inspect DFS events and select a compliant channel strategy for the site”. The result should be checked by “Correlate radar events with channel moves and client outage duration”.

Incorrect Answers

B:

The proposed alternative—neighbor information can reduce blind scans for compatible clients—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

C:

The proposed alternative—mutual certificate-based authentication requires valid, trusted certificate identities—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

D:

The proposed alternative—low-rate broadcast traffic can consume disproportionate WLAN airtime—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

Question 364

At a regional hospital network, the network team reports that a 5 GHz AP switches channels unexpectedly and some clients reconnect slowly. Which test would most directly show that the requested outcome was achieved?

  1. Measure broadcast airtime and verify required service discovery
  2. Measure RSSI, SNR and roaming at representative user locations
  3. Compare airtime consumption and application performance per client class
  4. Correlate radar events with channel moves and client outage duration

Explanation

Correct Answer

D:

The outcome check is to correlate radar events with channel moves and client outage duration. It measures whether the stated requirement was met. Radar detection requires departure from affected DFS channels when applicable.

Incorrect Answers

A:

The proposed alternative—measure broadcast airtime and verify required service discovery—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

B:

The proposed alternative—measure RSSI, SNR and roaming at representative user locations—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

C:

The proposed alternative—compare airtime consumption and application performance per client class—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

Question 365

At a regional hospital network, the network team reports that a 5 GHz AP switches channels unexpectedly and some clients reconnect slowly. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Validate predictive RF design through an active post-installation site survey
  2. Inspect DFS events and select a compliant channel strategy for the site
  3. Correlate radar events with channel moves and client outage duration
  4. Measure beacon airtime and client service after consolidation
  5. Assess wireless mesh backhaul health and hop count separately from client access

Explanation

Correct Answers

B:

The selected action is Inspect DFS events and select a compliant channel strategy for the site.

C:

The selected action is Correlate radar events with channel moves and client outage duration.

Incorrect Answers

A:

The proposed alternative—validate predictive RF design through an active post-installation site survey—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

D:

The proposed alternative—measure beacon airtime and client service after consolidation—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

E:

The proposed alternative—assess wireless mesh backhaul health and hop count separately from client access—does not address this requirement. Radar detection requires departure from affected DFS channels when applicable.

Question 366

At an industrial manufacturing site, the network engineering team reports that a lecture theatre has hundreds of clients and acceptable signal but low total capacity. Which configuration or operating decision most directly addresses the issue?

  1. Redistribute channels based on a site survey and realistic reuse plan
  2. Use RADIUS-returned roles or VLAN assignment with reviewed policy mapping
  3. Design cells and radio reuse for airtime capacity rather than coverage alone
  4. Inspect the captive-portal redirect, DNS reachability and guest role policy

Explanation

Correct Answer

C:

Design cells and radio reuse for airtime capacity rather than coverage alone. Dense clients contend for finite channel airtime even with strong signal. Confirm the result using this test: Measure channel occupancy, client distribution and aggregate throughput.

Incorrect Answers

A:

The proposed alternative—redistribute channels based on a site survey and realistic reuse plan—does not address the current failure. Instead, design cells and radio reuse for airtime capacity rather than coverage alone.

B:

The proposed alternative—use RADIUS-returned roles or VLAN assignment with reviewed policy mapping—does not address the current failure. Instead, design cells and radio reuse for airtime capacity rather than coverage alone.

D:

The proposed alternative—inspect the captive-portal redirect, DNS reachability and guest role policy—does not address the current failure. Instead, design cells and radio reuse for airtime capacity rather than coverage alone.

Question 367

At an industrial manufacturing site, the network engineering team reports that a lecture theatre has hundreds of clients and acceptable signal but low total capacity. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Increase all AP transmit powers and assume same-channel contention disappears
  2. Set adjacent APs to overlapping wide channels to maximize coverage
  3. Add a single high-power AP and assume greater radio range creates more capacity
  4. Disable regulatory DFS behavior to maintain one fixed channel

Explanation

Correct Answer

C:

The shortcut at issue is to add a single high-power AP and assume greater radio range creates more capacity. The corrective choice is: Design cells and radio reuse for airtime capacity rather than coverage alone.

Incorrect Answers

A:

The shortcut to increase all AP transmit powers and assume same-channel contention disappears is not the error in this case. The actual risk comes from add a single high-power AP and assume greater radio range creates more capacity.

B:

The shortcut to set adjacent APs to overlapping wide channels to maximize coverage is not the error in this case. The actual risk comes from add a single high-power AP and assume greater radio range creates more capacity.

D:

The shortcut to disable regulatory DFS behavior to maintain one fixed channel is not the error in this case. The actual risk comes from add a single high-power AP and assume greater radio range creates more capacity.

Question 368

At an industrial manufacturing site, the network engineering team reports that a lecture theatre has hundreds of clients and acceptable signal but low total capacity. Which technical reasoning most specifically justifies the recommended solution?

  1. A client cannot attach to a radio band its hardware does not support
  2. Discovery visibility and actual traffic authorization are separate controls
  3. Dense clients contend for finite channel airtime even with strong signal
  4. Radar detection requires departure from affected DFS channels when applicable

Explanation

Correct Answer

C:

Dense clients contend for finite channel airtime even with strong signal. This is the technical reason behind the proposed approach: “Design cells and radio reuse for airtime capacity rather than coverage alone”. The result should be checked by “Measure channel occupancy, client distribution and aggregate throughput”.

Incorrect Answers

A:

The proposed alternative—a client cannot attach to a radio band its hardware does not support—does not address the current failure. Instead, design cells and radio reuse for airtime capacity rather than coverage alone.

B:

The proposed alternative—discovery visibility and actual traffic authorization are separate controls—does not address the current failure. Instead, design cells and radio reuse for airtime capacity rather than coverage alone.

D:

The proposed alternative—radar detection requires departure from affected DFS channels when applicable—does not address the current failure. Instead, design cells and radio reuse for airtime capacity rather than coverage alone.

Question 369

At an industrial manufacturing site, the network engineering team reports that a lecture theatre has hundreds of clients and acceptable signal but low total capacity. Which test would most directly show that the requested outcome was achieved?

  1. Measure channel occupancy, client distribution and aggregate throughput
  2. Inspect AP restricted-power warnings and negotiated PoE class
  3. Check approved display discovery and denied unrelated services
  4. Measure band association, channel utilization and retry rate

Explanation

Correct Answer

A:

The outcome check is to measure channel occupancy, client distribution and aggregate throughput. It measures whether the stated requirement was met.

Incorrect Answers

B:

The suggested check—inspect AP restricted-power warnings and negotiated PoE class—does not test the required result. Instead, measure channel occupancy, client distribution and aggregate throughput.

C:

The suggested check—check approved display discovery and denied unrelated services—does not test the required result. Instead, measure channel occupancy, client distribution and aggregate throughput.

D:

The suggested check—measure band association, channel utilization and retry rate—does not test the required result. Instead, measure channel occupancy, client distribution and aggregate throughput.

Question 370

At an industrial manufacturing site, the network engineering team reports that a lecture theatre has hundreds of clients and acceptable signal but low total capacity. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Measure channel occupancy, client distribution and aggregate throughput
  2. Design cells and radio reuse for airtime capacity rather than coverage alone
  3. Check client capabilities and actual 6 GHz SSID visibility
  4. Evaluate controlled broadcast/multicast optimization while protecting required discovery
  5. Verify required PoE class and budget for the intended AP feature set

Explanation

Correct Answers

A:

The selected action is Measure channel occupancy, client distribution and aggregate throughput. Its matching outcome check is to measure channel occupancy, client distribution and aggregate throughput.

B:

The selected action is Design cells and radio reuse for airtime capacity rather than coverage alone. Its matching outcome check is to measure channel occupancy, client distribution and aggregate throughput.

Incorrect Answers

C:

The proposed alternative—check client capabilities and actual 6 GHz SSID visibility—does not address the current failure. Instead, design cells and radio reuse for airtime capacity rather than coverage alone.

D:

The proposed alternative—evaluate controlled broadcast/multicast optimization while protecting required discovery—does not address the current failure. Instead, design cells and radio reuse for airtime capacity rather than coverage alone.

E:

The proposed alternative—verify required PoE class and budget for the intended AP feature set—does not address the current failure. Instead, design cells and radio reuse for airtime capacity rather than coverage alone.

HPE Network Campus Access Professional (HPE7-A01) Practice Tests