Practice Exams:

HP HPE7-A01 Dumps

EXAM: HPE Network Campus Access Professional
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE7-A01 Premium Bundle


  • Premium File 204 Questions & Answers
  • Study Guide 1264 Pages

HP HPE7-A01 Practice Test 1

Question 1

At a logistics and warehousing campus, the access-network team reports that traffic for three departments traverses one switch uplink but appears in the wrong VLAN. Which configuration or operating decision most directly addresses the issue?

  1. Configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs
  2. Check total PoE budget and per-port power negotiation against AP requirements
  3. Document channel selection and VLAN-to-SSID mapping as separate design decisions
  4. Provide a routed interface or gateway and suitable policy between the VLANs

Explanation

Correct Answer

A:

Configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs. 802.1Q tags identify the logical VLAN carried over a shared Ethernet link. Confirm the result using this test: Inspect tagged frames and VLAN membership on both switches.

Incorrect Answers

B:

The proposed alternative—check total PoE budget and per-port power negotiation against AP requirements—does not address the current failure. Instead, configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs.

C:

The proposed alternative—document channel selection and VLAN-to-SSID mapping as separate design decisions—does not address the current failure. Instead, configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs.

D:

The proposed alternative—provide a routed interface or gateway and suitable policy between the VLANs—does not address the current failure. Instead, configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs.

Question 2

At a logistics and warehousing campus, the access-network team reports that traffic for three departments traverses one switch uplink but appears in the wrong VLAN. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Assume 802.3 link pulses establish user identity for 802.1X
  2. Use the same channel number as the VLAN ID to make the AP bridge correctly
  3. Treat association success as proof that routing and DHCP are correct
  4. Assume 802.11 radio channels create VLAN tags on an Ethernet trunk

Explanation

Correct Answer

D:

The shortcut at issue is to assume 802.11 radio channels create VLAN tags on an Ethernet trunk. The corrective choice is: Configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs.

Incorrect Answers

A:

The shortcut to assume 802.3 link pulses establish user identity for 802.1X is not the error in this case. The actual risk comes from assuming 802.11 radio channels create VLAN tags on an Ethernet trunk.

B:

The shortcut to use the same channel number as the VLAN ID to make the AP bridge correctly is not the error in this case. The actual risk comes from assuming 802.11 radio channels create VLAN tags on an Ethernet trunk.

C:

The shortcut to treat association success as proof that routing and DHCP are correct is not the error in this case. The actual risk comes from assuming 802.11 radio channels create VLAN tags on an Ethernet trunk.

Question 3

At a logistics and warehousing campus, the access-network team reports that traffic for three departments traverses one switch uplink but appears in the wrong VLAN. Which technical reasoning most specifically justifies the recommended solution?

  1. 802.3 PoE delivery depends on negotiated power and the switch's available budget
  2. 802.1X controls port-based admission independently of physical link-up
  3. 802.1Q tags identify the logical VLAN carried over a shared Ethernet link
  4. Link aggregation distributes eligible flows without guaranteeing one flow uses all links

Explanation

Correct Answer

C:

802.1Q tags identify the logical VLAN carried over a shared Ethernet link. This is the technical reason behind the proposed approach: “Configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs”. The result should be checked by “Inspect tagged frames and VLAN membership on both switches”.

Incorrect Answers

A:

The proposed alternative—802.3 PoE delivery depends on negotiated power and the switch's available budget—does not address the current failure. Instead, configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs.

B:

The proposed alternative—802.1X controls port-based admission independently of physical link-up—does not address the current failure. Instead, configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs.

D:

The proposed alternative—link aggregation distributes eligible flows without guaranteeing one flow uses all links—does not address the current failure. Instead, configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs.

Question 4

At a logistics and warehousing campus, the access-network team reports that traffic for three departments traverses one switch uplink but appears in the wrong VLAN. Which test would most directly show that the requested outcome was achieved?

  1. Inspect tagged frames and VLAN membership on both switches
  2. Inspect negotiated PoE class, actual draw and switch power alarms
  3. Check ARP neighbors, gateway route and inter-VLAN traffic
  4. Inspect RF channel and client VLAN separately on the AP

Explanation

Correct Answer

A:

The outcome check is to inspect tagged frames and VLAN membership on both switches. It measures whether the stated requirement was met.

Incorrect Answers

B:

The suggested check—inspect negotiated PoE class, actual draw and switch power alarms—does not test the required result. Instead, inspect tagged frames and VLAN membership on both switches.

C:

The suggested check—check ARP neighbors, gateway route and inter-VLAN traffic—does not test the required result. Instead, inspect tagged frames and VLAN membership on both switches.

D:

The suggested check—inspect RF channel and client VLAN separately on the AP—does not test the required result. Instead, inspect tagged frames and VLAN membership on both switches.

Question 5

At a logistics and warehousing campus, the access-network team reports that traffic for three departments traverses one switch uplink but appears in the wrong VLAN. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Inspect the 802.1X supplicant and RADIUS authorization sequence
  2. Compare association state with DHCP leases and a routed ping
  3. Inspect tagged frames and VLAN membership on both switches
  4. Configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs
  5. Document channel selection and VLAN-to-SSID mapping as separate design decisions

Explanation

Correct Answers

C:

The selected action is Inspect tagged frames and VLAN membership on both switches. Its matching outcome check is to inspect tagged frames and VLAN membership on both switches.

D:

The selected action is Configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs. Its matching outcome check is to inspect tagged frames and VLAN membership on both switches.

Incorrect Answers

A:

The proposed alternative—inspect the 802.1X supplicant and RADIUS authorization sequence—does not address the current failure. Instead, configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs.

B:

The proposed alternative—compare association state with DHCP leases and a routed ping—does not address the current failure. Instead, configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs.

E:

For the paired action and proof, the proposed alternative—document channel selection and VLAN-to-SSID mapping as separate design decisions—does not address the current failure. Instead, configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs

Question 6

At a municipal public library system, the operations team reports that a wireless client associates to an AP but has no usable IP connectivity. Which configuration or operating decision most directly addresses the issue?

  1. Validate LACP membership and explain per-flow hashing before estimating throughput
  2. Configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs
  3. Provide a routed interface or gateway and suitable policy between the VLANs
  4. Check wireless association first, then validate the SSID's VLAN and DHCP path separately

Explanation

Correct Answer

D:

Check wireless association first, then validate the SSID's VLAN and DHCP path separately. Radio association proves an 802.11 link, not end-to-end IP service. Confirm the result using this test: Compare association state with DHCP leases and a routed ping.

Incorrect Answers

A:

The proposed alternative—validate LACP membership and explain per-flow hashing before estimating throughput—does not address the current failure. Instead, check wireless association first, then validate the SSID's VLAN and DHCP path separately.

B:

The proposed alternative—configure the uplink as a tagged 802.1Q trunk with explicitly permitted VLANs—does not address the current failure. Instead, check wireless association first, then validate the SSID's VLAN and DHCP path separately.

C:

The proposed alternative—provide a routed interface or gateway and suitable policy between the VLANs—does not address the current failure. Instead, check wireless association first, then validate the SSID's VLAN and DHCP path separately.

Question 7

At a municipal public library system, the operations team reports that a wireless client associates to an AP but has no usable IP connectivity. A design review identifies an unsupported shortcut. Which assumption should the team reject for this particular problem?

  1. Expect one TCP session to be striped evenly over every LAG member
  2. Assume 802.3 link pulses establish user identity for 802.1X
  3. Treat association success as proof that routing and DHCP are correct
  4. Use the same channel number as the VLAN ID to make the AP bridge correctly

Explanation

Correct Answer

C:

The shortcut at issue is to treat association success as proof that routing and DHCP are correct. The corrective choice is: Check wireless association first, then validate the SSID's VLAN and DHCP path separately.

Incorrect Answers

A:

The shortcut to expect one TCP session to be striped evenly over every LAG member is not the error in this case. The actual risk comes from treat association success as proof that routing and DHCP are correct.

B:

The shortcut to assume 802.3 link pulses establish user identity for 802.1X is not the error in this case. The actual risk comes from treat association success as proof that routing and DHCP are correct.

D:

The shortcut to use the same channel number as the VLAN ID to make the AP bridge correctly is not the error in this case. The actual risk comes from treat association success as proof that routing and DHCP are correct.

Question 8

At a municipal public library system, the operations team reports that a wireless client associates to an AP but has no usable IP connectivity. Which technical reasoning most specifically justifies the recommended solution?

  1. 802.3 PoE delivery depends on negotiated power and the switch's available budget
  2. 802.1Q tags identify the logical VLAN carried over a shared Ethernet link
  3. Radio association proves an 802.11 link, not end-to-end IP service
  4. 802.1X controls port-based admission independently of physical link-up

Explanation

Correct Answer

C:

Radio association proves an 802.11 link, not end-to-end IP service. This is the technical reason behind the proposed approach: “Check wireless association first, then validate the SSID's VLAN and DHCP path separately”. The result should be checked by “Compare association state with DHCP leases and a routed ping”.

Incorrect Answers

A:

The proposed alternative—802.3 PoE delivery depends on negotiated power and the switch's available budget—does not address the current failure. Instead, check wireless association first, then validate the SSID's VLAN and DHCP path separately.

B:

The proposed alternative—802.1Q tags identify the logical VLAN carried over a shared Ethernet link—does not address the current failure. Instead, check wireless association first, then validate the SSID's VLAN and DHCP path separately.

D:

The proposed alternative—802.1X controls port-based admission independently of physical link-up—does not address the current failure. Instead, check wireless association first, then validate the SSID's VLAN and DHCP path separately.

Question 9

At a municipal public library system, the operations team reports that a wireless client associates to an AP but has no usable IP connectivity. Which test would most directly show that the requested outcome was achieved?

  1. Compare association state with DHCP leases and a routed ping
  2. Check ARP neighbors, gateway route and inter-VLAN traffic
  3. Inspect LACP state and traffic distribution across multiple flows
  4. Inspect tagged frames and VLAN membership on both switches

Explanation

Correct Answer

A:

The outcome check is to compare association state with DHCP leases and a routed ping. It measures whether the stated requirement was met.

Incorrect Answers

B:

The suggested check—check ARP neighbors, gateway route and inter-VLAN traffic—does not test the required result. Instead, compare association state with DHCP leases and a routed ping.

C:

The suggested check—inspect LACP state and traffic distribution across multiple flows—does not test the required result. Instead, compare association state with DHCP leases and a routed ping.

D:

The suggested check—inspect tagged frames and VLAN membership on both switches—does not test the required result. Instead, compare association state with DHCP leases and a routed ping.

Question 10

At a municipal public library system, the operations team reports that a wireless client associates to an AP but has no usable IP connectivity. Select TWO complementary choices: the targeted response and an acceptance test that verifies it.

  1. Inspect the 802.1X supplicant and RADIUS authorization sequence
  2. Inspect RF channel and client VLAN separately on the AP
  3. Compare association state with DHCP leases and a routed ping
  4. Check wireless association first, then validate the SSID's VLAN and DHCP path separately
  5. Validate LACP membership and explain per-flow hashing before estimating throughput

Explanation

Correct Answers

C:

The selected action is Compare association state with DHCP leases and a routed ping. Its matching outcome check is to compare association state with DHCP leases and a routed ping.

D:

The selected action is Check wireless association first, then validate the SSID's VLAN and DHCP path separately. Its matching outcome check is to compare association state with DHCP leases and a routed ping.

Incorrect Answers

A:

The proposed alternative—inspect the 802.1X supplicant and RADIUS authorization sequence—does not address the current failure. Instead, check wireless association first, then validate the SSID's VLAN and DHCP path separately.

B:

The proposed alternative—inspect RF channel and client VLAN separately on the AP—does not address the current failure. Instead, check wireless association first, then validate the SSID's VLAN and DHCP path separately.

E:

For the paired action and proof, the proposed alternative—validate LACP membership and explain per-flow hashing before estimating throughput—does not address the current failure. Instead, check wireless association first, then validate the SSID's VLAN and DHCP path separately

HPE Network Campus Access Professional (HPE7-A01) Practice Tests