Practice Exams:

HP HPE6-A86 Dumps

EXAM: HPE Network Switching Associate
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE6-A86 Premium Bundle


  • Premium File 108 Questions & Answers
  • Study Guide 427 Pages

HP HPE6-A86 Practice Test 37

Question 360

A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway What observable postchange evidence would most directly demonstrate that the fix worked?

  1. Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface
  2. Check the route table, next-hop ARP and a targeted traceroute toward the remote network
  3. Capture before-and-after operational show output and a real endpoint flow through the modified path
  4. Trace a tagged test frame for each required VLAN and verify per-VLAN MAC learning on the far switch

Answer & Explanations

Correct answer: B

A.

This observation would verify a different remedy: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. That remedy applies to: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The present condition is: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. To assess it, check: Check the route table, next-hop ARP and a targeted traceroute toward the remote network.

B.

Check the route table, next-hop ARP and a targeted traceroute toward the remote network. This check directly tests: Install a specific route only when its next hop resolves through an active connected path. The underlying behavior is: Static forwarding selects a configured gateway, but actual packets still require an eligible egress interface and reachable next-hop adjacency. The case is: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway.

C.

This observation would verify a different remedy: Correlate intended configuration with effective interface, VLAN, MAC and route state using AOS-CX show evidence. That remedy applies to: A financial-services branch reports a completed LAG migration even though one member never became active. The present condition is: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. To assess it, check: Check the route table, next-hop ARP and a targeted traceroute toward the remote network.

D.

This observation would verify a different remedy: Configure required 802.1Q tagged VLANs consistently at each trunk endpoint and exclude unneeded segments. That remedy applies to: A financial campus needs a restricted trading VLAN across two new switching closets without extending guest traffic. The present condition is: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. To assess it, check: Check the route table, next-hop ARP and a targeted traceroute toward the remote network.

Question 361

A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway The team wants to implement an approved fix while avoiding a regression. Which proposed shortcut would most directly undermine a safe correction for this particular case?

  1. Point a static route at an IP address outside every directly reachable or resolvable next-hop path
  2. Troubleshoot missing OSPF routes by increasing link bandwidth without checking adjacency state
  3. Mark the change successful just because the CLI accepted configuration commands
  4. Permit every available VLAN on every trunk instead of scoping to required segments

Answer & Explanations

Correct answer: A

A.

Point a static route at an IP address outside every directly reachable or resolvable next-hop path. This shortcut is unsafe for: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. The resulting failure can be: The route may not forward usable traffic and packets fail at the first hop. The safer response is: Install a specific route only when its next hop resolves through an active connected path.

B.

This proposed shortcut concerns a separate case: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The risk in this question concerns: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. Here the unsafe shortcut is: Point a static route at an IP address outside every directly reachable or resolvable next-hop path. Use this response instead: Install a specific route only when its next hop resolves through an active connected path.

C.

This proposed shortcut concerns a separate case: A financial-services branch reports a completed LAG migration even though one member never became active. The risk in this question concerns: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. Here the unsafe shortcut is: Point a static route at an IP address outside every directly reachable or resolvable next-hop path. Use this response instead: Install a specific route only when its next hop resolves through an active connected path.

D.

This proposed shortcut concerns a separate case: A financial campus needs a restricted trading VLAN across two new switching closets without extending guest traffic. The risk in this question concerns: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. Here the unsafe shortcut is: Point a static route at an IP address outside every directly reachable or resolvable next-hop path. Use this response instead: Install a specific route only when its next hop resolves through an active connected path.

Question 362

A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway Suppose the team instead chooses this shortcut: Point a static route at an IP address outside every directly reachable or resolvable next-hop path. If the team instead takes the following shortcut, what specific outcome is most likely?

  1. Neighbors never form and the downstream routes remain absent regardless of bandwidth
  2. An unnoticed down port or missing route persists into production despite a clean command prompt
  3. Unauthorized broadcast domains spread and irrelevant traffic traverses shared uplinks
  4. The route may not forward usable traffic and packets fail at the first hop

Answer & Explanations

Correct answer: D

A.

This failure concerns another scenario: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. In the stated case: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. The relevant consequence is: The route may not forward usable traffic and packets fail at the first hop. The control that prevents it is: Install a specific route only when its next hop resolves through an active connected path.

B.

This failure concerns another scenario: A financial-services branch reports a completed LAG migration even though one member never became active. In the stated case: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. The relevant consequence is: The route may not forward usable traffic and packets fail at the first hop. The control that prevents it is: Install a specific route only when its next hop resolves through an active connected path.

C.

This failure concerns another scenario: A financial campus needs a restricted trading VLAN across two new switching closets without extending guest traffic. In the stated case: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. The relevant consequence is: The route may not forward usable traffic and packets fail at the first hop. The control that prevents it is: Install a specific route only when its next hop resolves through an active connected path.

D.

The route may not forward usable traffic and packets fail at the first hop. This is the risk in the stated situation: A warehouse adds a remote robotics subnet and a static route refers to an old carrier gateway. The risky shortcut is: Point a static route at an IP address outside every directly reachable or resolvable next-hop path. Prevent it by: Install a specific route only when its next hop resolves through an active connected path.

Question 363

A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT Which proposed switching or network-engineering action most directly resolves the stated issue?

  1. Configure a supported DHCP relay on the client VLAN interface directed at the authorized server
  2. Configure restricted SSH management, named administrators and management reachability before enabling production interfaces
  3. Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors
  4. Set deliberate bridge priorities so the intended distribution switch is the spanning-tree root for relevant instances

Answer & Explanations

Correct answer: C

A.

This action is appropriate in a different case: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. There, the reason is: DHCP discover broadcasts are local to the client subnet unless a relay forwards the request across the routed boundary with subnet identity. The current case is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The appropriate response is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

B.

This action is appropriate in a different case: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. There, the reason is: Encrypted access and scoped authorization protect the control plane during deployment and reduce reliance on insecure defaults. The current case is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The appropriate response is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

C.

Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. The technical reason is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network. The stated condition is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. Confirm the result by: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

D.

This action is appropriate in a different case: A city council installs an inexpensive access switch that unexpectedly becomes the STP root. There, the reason is: Root election controls forwarding tree shape and avoids unintended hairpin or blocked paths through lower-capacity access links. The current case is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The appropriate response is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

Question 364

A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT An engineer proposes to match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. What technical explanation best supports the intended corrective action?

  1. DHCP discover broadcasts are local to the client subnet unless a relay forwards the request across the routed boundary with subnet identity
  2. OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network
  3. Encrypted access and scoped authorization protect the control plane during deployment and reduce reliance on insecure defaults
  4. Root election controls forwarding tree shape and avoids unintended hairpin or blocked paths through lower-capacity access links

Answer & Explanations

Correct answer: B

A.

This principle explains a different technical intervention: Configure a supported DHCP relay on the client VLAN interface directed at the authorized server. It applies to: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The actual case is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The mechanism relevant here is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network.

B.

OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network. That mechanism explains the decision: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. In the reported situation: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. Confirmation requires: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

C.

This principle explains a different technical intervention: Configure restricted SSH management, named administrators and management reachability before enabling production interfaces. It applies to: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The actual case is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The mechanism relevant here is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network.

D.

This principle explains a different technical intervention: Set deliberate bridge priorities so the intended distribution switch is the spanning-tree root for relevant instances. It applies to: A city council installs an inexpensive access switch that unexpectedly becomes the STP root. The actual case is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The mechanism relevant here is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network.

Question 365

A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT What observable postchange evidence would most directly demonstrate that the fix worked?

  1. Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface
  2. Obtain a fresh lease from a client in each VLAN and verify correct scope, router and server acknowledgement
  3. Verify authorized SSH access and deny unintended management attempts before connecting user VLANs
  4. Use spanning-tree show commands to verify root identity, path cost and active or alternate port roles

Answer & Explanations

Correct answer: A

A.

Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface. This check directly tests: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. The underlying behavior is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network. The case is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT.

B.

This observation would verify a different remedy: Configure a supported DHCP relay on the client VLAN interface directed at the authorized server. That remedy applies to: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The present condition is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. To assess it, check: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

C.

This observation would verify a different remedy: Configure restricted SSH management, named administrators and management reachability before enabling production interfaces. That remedy applies to: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The present condition is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. To assess it, check: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

D.

This observation would verify a different remedy: Set deliberate bridge priorities so the intended distribution switch is the spanning-tree root for relevant instances. That remedy applies to: A city council installs an inexpensive access switch that unexpectedly becomes the STP root. The present condition is: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. To assess it, check: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

Question 366

A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT The team wants to implement an approved fix while avoiding a regression. Which proposed shortcut would most directly undermine a safe correction for this particular case?

  1. Add a static route to the DHCP server but omit the actual DHCP relay configuration
  2. Bring the switch online with default shared credentials and reachable legacy Telnet service
  3. Let a newly installed edge switch with an accidental low bridge ID become the root
  4. Troubleshoot missing OSPF routes by increasing link bandwidth without checking adjacency state

Answer & Explanations

Correct answer: D

A.

This proposed shortcut concerns a separate case: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The risk in this question concerns: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. Here the unsafe shortcut is: Troubleshoot missing OSPF routes by increasing link bandwidth without checking adjacency state. Use this response instead: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

B.

This proposed shortcut concerns a separate case: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The risk in this question concerns: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. Here the unsafe shortcut is: Troubleshoot missing OSPF routes by increasing link bandwidth without checking adjacency state. Use this response instead: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

C.

This proposed shortcut concerns a separate case: A city council installs an inexpensive access switch that unexpectedly becomes the STP root. The risk in this question concerns: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. Here the unsafe shortcut is: Troubleshoot missing OSPF routes by increasing link bandwidth without checking adjacency state. Use this response instead: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

D.

Troubleshoot missing OSPF routes by increasing link bandwidth without checking adjacency state. This shortcut is unsafe for: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The resulting failure can be: Neighbors never form and the downstream routes remain absent regardless of bandwidth. The safer response is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

Question 367

A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT Suppose the team instead chooses this shortcut: Troubleshoot missing OSPF routes by increasing link bandwidth without checking adjacency state. If the team instead takes the following shortcut, what specific outcome is most likely?

  1. Clients in remote VLANs continue timing out because discovery messages never leave their broadcast domains
  2. Anyone on reachable segments may compromise the switch before security controls are established
  3. Neighbors never form and the downstream routes remain absent regardless of bandwidth
  4. Traffic traverses an inefficient or unstable tree and planned failover paths change unexpectedly

Answer & Explanations

Correct answer: C

A.

This failure concerns another scenario: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. In the stated case: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The relevant consequence is: Neighbors never form and the downstream routes remain absent regardless of bandwidth. The control that prevents it is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

B.

This failure concerns another scenario: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. In the stated case: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The relevant consequence is: Neighbors never form and the downstream routes remain absent regardless of bandwidth. The control that prevents it is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

C.

Neighbors never form and the downstream routes remain absent regardless of bandwidth. This is the risk in the stated situation: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The risky shortcut is: Troubleshoot missing OSPF routes by increasing link bandwidth without checking adjacency state. Prevent it by: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

D.

This failure concerns another scenario: A city council installs an inexpensive access switch that unexpectedly becomes the STP root. In the stated case: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The relevant consequence is: Neighbors never form and the downstream routes remain absent regardless of bandwidth. The control that prevents it is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

Question 368

A regional data center moves one routed distribution link to a different area and the adjacency disappears Which proposed switching or network-engineering action most directly resolves the stated issue?

  1. Configure a supported DHCP relay on the client VLAN interface directed at the authorized server
  2. Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors
  3. Configure restricted SSH management, named administrators and management reachability before enabling production interfaces
  4. Set deliberate bridge priorities so the intended distribution switch is the spanning-tree root for relevant instances

Answer & Explanations

Correct answer: B

A.

This action is appropriate in a different case: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. There, the reason is: DHCP discover broadcasts are local to the client subnet unless a relay forwards the request across the routed boundary with subnet identity. The current case is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. The appropriate response is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

B.

Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. The technical reason is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network. The stated condition is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. Confirm the result by: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

C.

This action is appropriate in a different case: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. There, the reason is: Encrypted access and scoped authorization protect the control plane during deployment and reduce reliance on insecure defaults. The current case is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. The appropriate response is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

D.

This action is appropriate in a different case: A city council installs an inexpensive access switch that unexpectedly becomes the STP root. There, the reason is: Root election controls forwarding tree shape and avoids unintended hairpin or blocked paths through lower-capacity access links. The current case is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. The appropriate response is: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors.

Question 369

A regional data center moves one routed distribution link to a different area and the adjacency disappears An engineer proposes to match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. What technical explanation best supports the intended corrective action?

  1. OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network
  2. DHCP discover broadcasts are local to the client subnet unless a relay forwards the request across the routed boundary with subnet identity
  3. Encrypted access and scoped authorization protect the control plane during deployment and reduce reliance on insecure defaults
  4. Root election controls forwarding tree shape and avoids unintended hairpin or blocked paths through lower-capacity access links

Answer & Explanations

Correct answer: A

A.

OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network. That mechanism explains the decision: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. In the reported situation: A regional data center moves one routed distribution link to a different area and the adjacency disappears. Confirmation requires: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

B.

This principle explains a different technical intervention: Configure a supported DHCP relay on the client VLAN interface directed at the authorized server. It applies to: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The actual case is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. The mechanism relevant here is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network.

C.

This principle explains a different technical intervention: Configure restricted SSH management, named administrators and management reachability before enabling production interfaces. It applies to: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The actual case is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. The mechanism relevant here is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network.

D.

This principle explains a different technical intervention: Set deliberate bridge priorities so the intended distribution switch is the spanning-tree root for relevant instances. It applies to: A city council installs an inexpensive access switch that unexpectedly becomes the STP root. The actual case is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. The mechanism relevant here is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network.

Question 370

A regional data center moves one routed distribution link to a different area and the adjacency disappears What observable postchange evidence would most directly demonstrate that the fix worked?

  1. Obtain a fresh lease from a client in each VLAN and verify correct scope, router and server acknowledgement
  2. Verify authorized SSH access and deny unintended management attempts before connecting user VLANs
  3. Use spanning-tree show commands to verify root identity, path cost and active or alternate port roles
  4. Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface

Answer & Explanations

Correct answer: D

A.

This observation would verify a different remedy: Configure a supported DHCP relay on the client VLAN interface directed at the authorized server. That remedy applies to: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The present condition is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. To assess it, check: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

B.

This observation would verify a different remedy: Configure restricted SSH management, named administrators and management reachability before enabling production interfaces. That remedy applies to: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The present condition is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. To assess it, check: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

C.

This observation would verify a different remedy: Set deliberate bridge priorities so the intended distribution switch is the spanning-tree root for relevant instances. That remedy applies to: A city council installs an inexpensive access switch that unexpectedly becomes the STP root. The present condition is: A regional data center moves one routed distribution link to a different area and the adjacency disappears. To assess it, check: Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface.

D.

Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface. This check directly tests: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. The underlying behavior is: OSPF can exchange learned routes only after compatible neighbors complete adjacency formation on an eligible network. The case is: A regional data center moves one routed distribution link to a different area and the adjacency disappears.

HPE Network Switching Associate (HPE6-A86) Practice Tests