Practice Exams:

HP HPE6-A86 Dumps

EXAM: HPE Network Switching Associate
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE6-A86 Premium Bundle


  • Premium File 108 Questions & Answers
  • Study Guide 427 Pages

HP HPE6-A86 Practice Test 34

Question 330

A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch What observable postchange evidence would most directly demonstrate that the fix worked?

  1. Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs
  2. Verify FULL neighbor state where expected and confirm remote prefixes appear through the intended interface
  3. Capture before-and-after operational show output and a real endpoint flow through the modified path
  4. Inspect partner system IDs, member synchronization and logical aggregate counters under balanced test flows

Answer & Explanations

Correct answer: D

A.

This observation would verify a different remedy: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan. That remedy applies to: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The present condition is: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. To assess it, check: Inspect partner system IDs, member synchronization and logical aggregate counters under balanced test flows.

B.

This observation would verify a different remedy: Match routed link subnet, OSPF area, authentication and hello/dead parameters across intended neighbors. That remedy applies to: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The present condition is: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. To assess it, check: Inspect partner system IDs, member synchronization and logical aggregate counters under balanced test flows.

C.

This observation would verify a different remedy: Correlate intended configuration with effective interface, VLAN, MAC and route state using AOS-CX show evidence. That remedy applies to: A financial-services branch reports a completed LAG migration even though one member never became active. The present condition is: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. To assess it, check: Inspect partner system IDs, member synchronization and logical aggregate counters under balanced test flows.

D.

Inspect partner system IDs, member synchronization and logical aggregate counters under balanced test flows. This check directly tests: Configure corresponding LACP member ports with consistent speed, VLANs and compatible active or passive negotiation behavior. The underlying behavior is: A stable LACP bundle forms only when partner identity and eligible member parameters agree; distributing on ineligible links is avoided. The case is: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch.

Question 331

A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch The team wants to implement an approved fix while avoiding a regression. Which proposed shortcut would most directly undermine a safe correction for this particular case?

  1. Assume interface labels are accurate without validating the cable's real far-end neighbor
  2. Troubleshoot missing OSPF routes by increasing link bandwidth without checking adjacency state
  3. Set a member as a standalone access link while the peer expects it inside a tagged LACP bundle
  4. Mark the change successful just because the CLI accepted configuration commands

Answer & Explanations

Correct answer: C

A.

This proposed shortcut concerns a separate case: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The risk in this question concerns: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. Here the unsafe shortcut is: Set a member as a standalone access link while the peer expects it inside a tagged LACP bundle. Use this response instead: Configure corresponding LACP member ports with consistent speed, VLANs and compatible active or passive negotiation behavior.

B.

This proposed shortcut concerns a separate case: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. The risk in this question concerns: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. Here the unsafe shortcut is: Set a member as a standalone access link while the peer expects it inside a tagged LACP bundle. Use this response instead: Configure corresponding LACP member ports with consistent speed, VLANs and compatible active or passive negotiation behavior.

C.

Set a member as a standalone access link while the peer expects it inside a tagged LACP bundle. This shortcut is unsafe for: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. The resulting failure can be: Some flows blackhole and the logical uplink has reduced or asymmetric capacity. The safer response is: Configure corresponding LACP member ports with consistent speed, VLANs and compatible active or passive negotiation behavior.

D.

This proposed shortcut concerns a separate case: A financial-services branch reports a completed LAG migration even though one member never became active. The risk in this question concerns: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. Here the unsafe shortcut is: Set a member as a standalone access link while the peer expects it inside a tagged LACP bundle. Use this response instead: Configure corresponding LACP member ports with consistent speed, VLANs and compatible active or passive negotiation behavior.

Question 332

A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch Suppose the team instead chooses this shortcut: Set a member as a standalone access link while the peer expects it inside a tagged LACP bundle. If the team instead takes the following shortcut, what specific outcome is most likely?

  1. Engineers apply changes to the wrong physical link and create unexpected reachability loss
  2. Some flows blackhole and the logical uplink has reduced or asymmetric capacity
  3. Neighbors never form and the downstream routes remain absent regardless of bandwidth
  4. An unnoticed down port or missing route persists into production despite a clean command prompt

Answer & Explanations

Correct answer: B

A.

This failure concerns another scenario: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. In the stated case: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. The relevant consequence is: Some flows blackhole and the logical uplink has reduced or asymmetric capacity. The control that prevents it is: Configure corresponding LACP member ports with consistent speed, VLANs and compatible active or passive negotiation behavior.

B.

Some flows blackhole and the logical uplink has reduced or asymmetric capacity. This is the risk in the stated situation: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. The risky shortcut is: Set a member as a standalone access link while the peer expects it inside a tagged LACP bundle. Prevent it by: Configure corresponding LACP member ports with consistent speed, VLANs and compatible active or passive negotiation behavior.

C.

This failure concerns another scenario: A regional airport turns up a backup routed interconnect but its OSPF peer stays in INIT. In the stated case: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. The relevant consequence is: Some flows blackhole and the logical uplink has reduced or asymmetric capacity. The control that prevents it is: Configure corresponding LACP member ports with consistent speed, VLANs and compatible active or passive negotiation behavior.

D.

This failure concerns another scenario: A financial-services branch reports a completed LAG migration even though one member never became active. In the stated case: A private clinic sees traffic drops after one side of its distribution LAG was rebuilt from scratch. The relevant consequence is: Some flows blackhole and the logical uplink has reduced or asymmetric capacity. The control that prevents it is: Configure corresponding LACP member ports with consistent speed, VLANs and compatible active or passive negotiation behavior.

Question 333

A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field Which proposed switching or network-engineering action most directly resolves the stated issue?

  1. Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan
  2. Configure the appropriate Layer 3 VLAN interfaces and routing permissions on a switch with supported routing capability
  3. Configure a supported DHCP relay on the client VLAN interface directed at the authorized server
  4. Configure restricted SSH management, named administrators and management reachability before enabling production interfaces

Answer & Explanations

Correct answer: A

A.

Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan. The technical reason is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links. The stated condition is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. Confirm the result by: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

B.

This action is appropriate in a different case: An outpatient clinic separates lab printers from reception workstations and now requires tightly scoped inter-VLAN service. There, the reason is: A VLAN interface acts as the subnet gateway and participates in route selection; pure Layer 2 access membership does not provide inter-VLAN routing. The current case is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The appropriate response is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

C.

This action is appropriate in a different case: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. There, the reason is: DHCP discover broadcasts are local to the client subnet unless a relay forwards the request across the routed boundary with subnet identity. The current case is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The appropriate response is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

D.

This action is appropriate in a different case: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. There, the reason is: Encrypted access and scoped authorization protect the control plane during deployment and reduce reliance on insecure defaults. The current case is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The appropriate response is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

Question 334

A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field An engineer proposes to enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan. What technical explanation best supports the intended corrective action?

  1. A VLAN interface acts as the subnet gateway and participates in route selection; pure Layer 2 access membership does not provide inter-VLAN routing
  2. DHCP discover broadcasts are local to the client subnet unless a relay forwards the request across the routed boundary with subnet identity
  3. Encrypted access and scoped authorization protect the control plane during deployment and reduce reliance on insecure defaults
  4. Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links

Answer & Explanations

Correct answer: D

A.

This principle explains a different technical intervention: Configure the appropriate Layer 3 VLAN interfaces and routing permissions on a switch with supported routing capability. It applies to: An outpatient clinic separates lab printers from reception workstations and now requires tightly scoped inter-VLAN service. The actual case is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The mechanism relevant here is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links.

B.

This principle explains a different technical intervention: Configure a supported DHCP relay on the client VLAN interface directed at the authorized server. It applies to: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The actual case is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The mechanism relevant here is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links.

C.

This principle explains a different technical intervention: Configure restricted SSH management, named administrators and management reachability before enabling production interfaces. It applies to: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The actual case is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The mechanism relevant here is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links.

D.

Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links. That mechanism explains the decision: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan. In the reported situation: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. Confirmation requires: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

Question 335

A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field What observable postchange evidence would most directly demonstrate that the fix worked?

  1. Ping the SVI from a host in each source VLAN and trace a permitted inter-VLAN flow end to end
  2. Obtain a fresh lease from a client in each VLAN and verify correct scope, router and server acknowledgement
  3. Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs
  4. Verify authorized SSH access and deny unintended management attempts before connecting user VLANs

Answer & Explanations

Correct answer: C

A.

This observation would verify a different remedy: Configure the appropriate Layer 3 VLAN interfaces and routing permissions on a switch with supported routing capability. That remedy applies to: An outpatient clinic separates lab printers from reception workstations and now requires tightly scoped inter-VLAN service. The present condition is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. To assess it, check: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

B.

This observation would verify a different remedy: Configure a supported DHCP relay on the client VLAN interface directed at the authorized server. That remedy applies to: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The present condition is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. To assess it, check: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

C.

Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs. This check directly tests: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan. The underlying behavior is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links. The case is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field.

D.

This observation would verify a different remedy: Configure restricted SSH management, named administrators and management reachability before enabling production interfaces. That remedy applies to: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The present condition is: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. To assess it, check: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

Question 336

A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field The team wants to implement an approved fix while avoiding a regression. Which proposed shortcut would most directly undermine a safe correction for this particular case?

  1. Configure access VLANs only and expect isolated subnets to route automatically
  2. Assume interface labels are accurate without validating the cable's real far-end neighbor
  3. Add a static route to the DHCP server but omit the actual DHCP relay configuration
  4. Bring the switch online with default shared credentials and reachable legacy Telnet service

Answer & Explanations

Correct answer: B

A.

This proposed shortcut concerns a separate case: An outpatient clinic separates lab printers from reception workstations and now requires tightly scoped inter-VLAN service. The risk in this question concerns: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. Here the unsafe shortcut is: Assume interface labels are accurate without validating the cable's real far-end neighbor. Use this response instead: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

B.

Assume interface labels are accurate without validating the cable's real far-end neighbor. This shortcut is unsafe for: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The resulting failure can be: Engineers apply changes to the wrong physical link and create unexpected reachability loss. The safer response is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

C.

This proposed shortcut concerns a separate case: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The risk in this question concerns: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. Here the unsafe shortcut is: Assume interface labels are accurate without validating the cable's real far-end neighbor. Use this response instead: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

D.

This proposed shortcut concerns a separate case: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The risk in this question concerns: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. Here the unsafe shortcut is: Assume interface labels are accurate without validating the cable's real far-end neighbor. Use this response instead: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

Question 337

A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field Suppose the team instead chooses this shortcut: Assume interface labels are accurate without validating the cable's real far-end neighbor. If the team instead takes the following shortcut, what specific outcome is most likely?

  1. Engineers apply changes to the wrong physical link and create unexpected reachability loss
  2. Users can communicate locally but fail when attempting any cross-subnet service
  3. Clients in remote VLANs continue timing out because discovery messages never leave their broadcast domains
  4. Anyone on reachable segments may compromise the switch before security controls are established

Answer & Explanations

Correct answer: A

A.

Engineers apply changes to the wrong physical link and create unexpected reachability loss. This is the risk in the stated situation: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The risky shortcut is: Assume interface labels are accurate without validating the cable's real far-end neighbor. Prevent it by: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

B.

This failure concerns another scenario: An outpatient clinic separates lab printers from reception workstations and now requires tightly scoped inter-VLAN service. In the stated case: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The relevant consequence is: Engineers apply changes to the wrong physical link and create unexpected reachability loss. The control that prevents it is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

C.

This failure concerns another scenario: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. In the stated case: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The relevant consequence is: Engineers apply changes to the wrong physical link and create unexpected reachability loss. The control that prevents it is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

D.

This failure concerns another scenario: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. In the stated case: A university data closet contains several unlabeled cross-connects after a contractor rewired the patch field. The relevant consequence is: Engineers apply changes to the wrong physical link and create unexpected reachability loss. The control that prevents it is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

Question 338

A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch Which proposed switching or network-engineering action most directly resolves the stated issue?

  1. Configure the appropriate Layer 3 VLAN interfaces and routing permissions on a switch with supported routing capability
  2. Configure a supported DHCP relay on the client VLAN interface directed at the authorized server
  3. Configure restricted SSH management, named administrators and management reachability before enabling production interfaces
  4. Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan

Answer & Explanations

Correct answer: D

A.

This action is appropriate in a different case: An outpatient clinic separates lab printers from reception workstations and now requires tightly scoped inter-VLAN service. There, the reason is: A VLAN interface acts as the subnet gateway and participates in route selection; pure Layer 2 access membership does not provide inter-VLAN routing. The current case is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. The appropriate response is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

B.

This action is appropriate in a different case: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. There, the reason is: DHCP discover broadcasts are local to the client subnet unless a relay forwards the request across the routed boundary with subnet identity. The current case is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. The appropriate response is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

C.

This action is appropriate in a different case: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. There, the reason is: Encrypted access and scoped authorization protect the control plane during deployment and reduce reliance on insecure defaults. The current case is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. The appropriate response is: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan.

D.

Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan. The technical reason is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links. The stated condition is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. Confirm the result by: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

Question 339

A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch An engineer proposes to enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan. What technical explanation best supports the intended corrective action?

  1. A VLAN interface acts as the subnet gateway and participates in route selection; pure Layer 2 access membership does not provide inter-VLAN routing
  2. DHCP discover broadcasts are local to the client subnet unless a relay forwards the request across the routed boundary with subnet identity
  3. Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links
  4. Encrypted access and scoped authorization protect the control plane during deployment and reduce reliance on insecure defaults

Answer & Explanations

Correct answer: C

A.

This principle explains a different technical intervention: Configure the appropriate Layer 3 VLAN interfaces and routing permissions on a switch with supported routing capability. It applies to: An outpatient clinic separates lab printers from reception workstations and now requires tightly scoped inter-VLAN service. The actual case is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. The mechanism relevant here is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links.

B.

This principle explains a different technical intervention: Configure a supported DHCP relay on the client VLAN interface directed at the authorized server. It applies to: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The actual case is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. The mechanism relevant here is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links.

C.

Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links. That mechanism explains the decision: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan. In the reported situation: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. Confirmation requires: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

D.

This principle explains a different technical intervention: Configure restricted SSH management, named administrators and management reachability before enabling production interfaces. It applies to: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The actual case is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. The mechanism relevant here is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links.

Question 340

A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch What observable postchange evidence would most directly demonstrate that the fix worked?

  1. Ping the SVI from a host in each source VLAN and trace a permitted inter-VLAN flow end to end
  2. Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs
  3. Obtain a fresh lease from a client in each VLAN and verify correct scope, router and server acknowledgement
  4. Verify authorized SSH access and deny unintended management attempts before connecting user VLANs

Answer & Explanations

Correct answer: B

A.

This observation would verify a different remedy: Configure the appropriate Layer 3 VLAN interfaces and routing permissions on a switch with supported routing capability. That remedy applies to: An outpatient clinic separates lab printers from reception workstations and now requires tightly scoped inter-VLAN service. The present condition is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. To assess it, check: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

B.

Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs. This check directly tests: Enable authorized LLDP discovery and compare reported neighbor chassis and interface identifiers against the wiring plan. The underlying behavior is: Link-layer discovery exposes directly connected devices and ports, helping reveal crossed patch cables or misidentified links. The case is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch.

C.

This observation would verify a different remedy: Configure a supported DHCP relay on the client VLAN interface directed at the authorized server. That remedy applies to: A health clinic migrates desktops into a new VLAN but all new devices fail to receive leases. The present condition is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. To assess it, check: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

D.

This observation would verify a different remedy: Configure restricted SSH management, named administrators and management reachability before enabling production interfaces. That remedy applies to: A regional bank receives unopened access switches and must deploy them to unmanned branch offices. The present condition is: A railway operations center has two uplinks with identical descriptions but one leads to the wrong aggregation switch. To assess it, check: Confirm the expected LLDP neighbor IDs and local-port identities on both ends before changing VLANs.

HPE Network Switching Associate (HPE6-A86) Practice Tests