Practice Exams:

HP HPE6-A86 Dumps

EXAM: HPE Network Switching Associate
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

HPE6-A86 Premium Bundle


  • Premium File 108 Questions & Answers
  • Study Guide 427 Pages

HP HPE6-A86 Practice Test 3

Question 20

A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core An engineer proposes to verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends. What technical explanation best supports the intended corrective action?

  1. Ethernet switches learn source MAC locations within VLAN forwarding domains; an unknown unicast may flood until the destination is learned
  2. Optical wavelength, connector and link-mode compatibility determine whether the physical layer can establish and hold a reliable carrier
  3. TCP session setup and retransmission differ from UDP datagram flow, so a connectivity test must match the actual protocol
  4. QoS classification and scheduling prioritize latency-sensitive packets only when marking is applied at a controlled boundary with sufficient link capacity

Answer & Explanations

Correct answer: B

A.

This principle explains a different technical intervention: Inspect VLAN membership and learned destination MAC locations before altering routing. It applies to: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The actual case is: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. The mechanism relevant here is: Optical wavelength, connector and link-mode compatibility determine whether the physical layer can establish and hold a reliable carrier.

B.

Optical wavelength, connector and link-mode compatibility determine whether the physical layer can establish and hold a reliable carrier. That mechanism explains the decision: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends. In the reported situation: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. Confirmation requires: Compare port capability and optic diagnostics at both ends and confirm stable link with no rising physical errors.

C.

This principle explains a different technical intervention: Identify the application's transport protocol and port direction before troubleshooting policy. It applies to: A pharmacy point-of-sale device pings its upstream host but TCP authorization requests time out. The actual case is: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. The mechanism relevant here is: Optical wavelength, connector and link-mode compatibility determine whether the physical layer can establish and hold a reliable carrier.

D.

This principle explains a different technical intervention: Mark and queue validated voice traffic on ingress rather than trusting every endpoint label. It applies to: A metropolitan call center has choppy voice during nightly backup windows on a shared uplink. The actual case is: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. The mechanism relevant here is: Optical wavelength, connector and link-mode compatibility determine whether the physical layer can establish and hold a reliable carrier.

Question 21

A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core What observable postchange evidence would most directly demonstrate that the fix worked?

  1. Compare port capability and optic diagnostics at both ends and confirm stable link with no rising physical errors
  2. Observe correct per-VLAN MAC table entries and bidirectional local-frame forwarding during a test
  3. Test the required TCP handshake or UDP request-response with the specified port and examine matching counters
  4. Measure voice delay and drops under load while confirming data traffic is not indiscriminately placed in the priority queue

Answer & Explanations

Correct answer: A

A.

Compare port capability and optic diagnostics at both ends and confirm stable link with no rising physical errors. This check directly tests: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends. The underlying behavior is: Optical wavelength, connector and link-mode compatibility determine whether the physical layer can establish and hold a reliable carrier. The case is: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core.

B.

This observation would verify a different remedy: Inspect VLAN membership and learned destination MAC locations before altering routing. That remedy applies to: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The present condition is: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. To assess it, check: Compare port capability and optic diagnostics at both ends and confirm stable link with no rising physical errors.

C.

This observation would verify a different remedy: Identify the application's transport protocol and port direction before troubleshooting policy. That remedy applies to: A pharmacy point-of-sale device pings its upstream host but TCP authorization requests time out. The present condition is: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. To assess it, check: Compare port capability and optic diagnostics at both ends and confirm stable link with no rising physical errors.

D.

This observation would verify a different remedy: Mark and queue validated voice traffic on ingress rather than trusting every endpoint label. That remedy applies to: A metropolitan call center has choppy voice during nightly backup windows on a shared uplink. The present condition is: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. To assess it, check: Compare port capability and optic diagnostics at both ends and confirm stable link with no rising physical errors.

Question 22

A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core The team wants to implement an approved fix while avoiding a regression. Which proposed shortcut would most directly undermine a safe correction for this particular case?

  1. Add a default route to fix two hosts that should communicate inside the same VLAN
  2. Treat a successful ICMP ping as proof that the application's transport flow is permitted
  3. Trust all incoming DSCP markings including bulk backups on every access port
  4. Force an arbitrary high port speed before identifying installed optics and cabling

Answer & Explanations

Correct answer: D

A.

This proposed shortcut concerns a separate case: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The risk in this question concerns: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. Here the unsafe shortcut is: Force an arbitrary high port speed before identifying installed optics and cabling. Use this response instead: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

B.

This proposed shortcut concerns a separate case: A pharmacy point-of-sale device pings its upstream host but TCP authorization requests time out. The risk in this question concerns: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. Here the unsafe shortcut is: Force an arbitrary high port speed before identifying installed optics and cabling. Use this response instead: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

C.

This proposed shortcut concerns a separate case: A metropolitan call center has choppy voice during nightly backup windows on a shared uplink. The risk in this question concerns: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. Here the unsafe shortcut is: Force an arbitrary high port speed before identifying installed optics and cabling. Use this response instead: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

D.

Force an arbitrary high port speed before identifying installed optics and cabling. This shortcut is unsafe for: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. The resulting failure can be: The physical link remains unstable or down because the real media mismatch is untouched. The safer response is: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

Question 23

A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core Suppose the team instead chooses this shortcut: Force an arbitrary high port speed before identifying installed optics and cabling. If the team instead takes the following shortcut, what specific outcome is most likely?

  1. Same-VLAN delivery continues failing while the route changes an unrelated Layer 3 path
  2. Application sessions remain blocked while a basic reachability probe appears healthy
  3. The physical link remains unstable or down because the real media mismatch is untouched
  4. Bulk transfers can consume the expedited class, increasing latency for actual voice services

Answer & Explanations

Correct answer: C

A.

This failure concerns another scenario: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. In the stated case: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. The relevant consequence is: The physical link remains unstable or down because the real media mismatch is untouched. The control that prevents it is: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

B.

This failure concerns another scenario: A pharmacy point-of-sale device pings its upstream host but TCP authorization requests time out. In the stated case: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. The relevant consequence is: The physical link remains unstable or down because the real media mismatch is untouched. The control that prevents it is: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

C.

The physical link remains unstable or down because the real media mismatch is untouched. This is the risk in the stated situation: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. The risky shortcut is: Force an arbitrary high port speed before identifying installed optics and cabling. Prevent it by: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

D.

This failure concerns another scenario: A metropolitan call center has choppy voice during nightly backup windows on a shared uplink. In the stated case: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. The relevant consequence is: The physical link remains unstable or down because the real media mismatch is untouched. The control that prevents it is: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

Question 24

A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core Before the team can verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends, What must the team confirm before attempting the appropriate correction?

  1. Verify both endpoint access ports belong to the intended broadcast domain
  2. Obtain the actual module and cable identities on each side of the connection
  3. Obtain the application's actual source, destination and transport port list
  4. Identify authenticated voice endpoints, traffic classes and the constrained link

Answer & Explanations

Correct answer: B

A.

The offered prerequisite belongs to another condition: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. For the actual case: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. First establish: Obtain the actual module and cable identities on each side of the connection. Then perform: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

B.

Obtain the actual module and cable identities on each side of the connection. This prerequisite is needed before the action: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends. The relevant condition is: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. The underlying technical reason is: Optical wavelength, connector and link-mode compatibility determine whether the physical layer can establish and hold a reliable carrier.

C.

The offered prerequisite belongs to another condition: A pharmacy point-of-sale device pings its upstream host but TCP authorization requests time out. For the actual case: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. First establish: Obtain the actual module and cable identities on each side of the connection. Then perform: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

D.

The offered prerequisite belongs to another condition: A metropolitan call center has choppy voice during nightly backup windows on a shared uplink. For the actual case: A distribution depot relocates a closet and a new transceiver pair will not establish a link to the core. First establish: Obtain the actual module and cable identities on each side of the connection. Then perform: Verify transceiver type, fiber path, negotiated speed and supported physical settings at both ends.

Question 25

A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally Which proposed switching or network-engineering action most directly resolves the stated issue?

  1. Inspect VLAN membership and learned destination MAC locations before altering routing
  2. Validate the subnet decision, ARP entry and routed gateway reachability for the actual target
  3. Replace cleartext remote login and transfer paths with an approved encrypted management protocol
  4. Select an appropriate RSTP root and confirm alternate paths block until needed

Answer & Explanations

Correct answer: A

A.

Inspect VLAN membership and learned destination MAC locations before altering routing. The technical reason is: Ethernet switches learn source MAC locations within VLAN forwarding domains; an unknown unicast may flood until the destination is learned. The stated condition is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. Confirm the result by: Observe correct per-VLAN MAC table entries and bidirectional local-frame forwarding during a test.

B.

This action is appropriate in a different case: A courthouse desktop can reach neighboring printers but not a service in another VLAN after an addressing change. There, the reason is: An IPv4 host ARPs for a same-subnet peer or for its gateway when reaching a remote subnet; wrong masks or gateways change the adjacency being resolved. The current case is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The appropriate response is: Inspect VLAN membership and learned destination MAC locations before altering routing.

C.

This action is appropriate in a different case: A nonprofit's switch admins still push backups over FTP across a shared operations subnet. There, the reason is: SSH and SFTP protect administrative credentials and transfer content against passive observation in a way Telnet and plain FTP do not. The current case is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The appropriate response is: Inspect VLAN membership and learned destination MAC locations before altering routing.

D.

This action is appropriate in a different case: A hotel joins two closet switches to two aggregation switches and broadcast counters surge. There, the reason is: Spanning tree prevents circulating Ethernet frames by keeping a loop-free active forwarding topology and can reconverge after a failure. The current case is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The appropriate response is: Inspect VLAN membership and learned destination MAC locations before altering routing.

Question 26

A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally An engineer proposes to inspect VLAN membership and learned destination MAC locations before altering routing. What technical explanation best supports the intended corrective action?

  1. An IPv4 host ARPs for a same-subnet peer or for its gateway when reaching a remote subnet; wrong masks or gateways change the adjacency being resolved
  2. SSH and SFTP protect administrative credentials and transfer content against passive observation in a way Telnet and plain FTP do not
  3. Spanning tree prevents circulating Ethernet frames by keeping a loop-free active forwarding topology and can reconverge after a failure
  4. Ethernet switches learn source MAC locations within VLAN forwarding domains; an unknown unicast may flood until the destination is learned

Answer & Explanations

Correct answer: D

A.

This principle explains a different technical intervention: Validate the subnet decision, ARP entry and routed gateway reachability for the actual target. It applies to: A courthouse desktop can reach neighboring printers but not a service in another VLAN after an addressing change. The actual case is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The mechanism relevant here is: Ethernet switches learn source MAC locations within VLAN forwarding domains; an unknown unicast may flood until the destination is learned.

B.

This principle explains a different technical intervention: Replace cleartext remote login and transfer paths with an approved encrypted management protocol. It applies to: A nonprofit's switch admins still push backups over FTP across a shared operations subnet. The actual case is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The mechanism relevant here is: Ethernet switches learn source MAC locations within VLAN forwarding domains; an unknown unicast may flood until the destination is learned.

C.

This principle explains a different technical intervention: Select an appropriate RSTP root and confirm alternate paths block until needed. It applies to: A hotel joins two closet switches to two aggregation switches and broadcast counters surge. The actual case is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The mechanism relevant here is: Ethernet switches learn source MAC locations within VLAN forwarding domains; an unknown unicast may flood until the destination is learned.

D.

Ethernet switches learn source MAC locations within VLAN forwarding domains; an unknown unicast may flood until the destination is learned. That mechanism explains the decision: Inspect VLAN membership and learned destination MAC locations before altering routing. In the reported situation: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. Confirmation requires: Observe correct per-VLAN MAC table entries and bidirectional local-frame forwarding during a test.

Question 27

A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally What observable postchange evidence would most directly demonstrate that the fix worked?

  1. Compare configured masks and ARP neighbor entries with an on-link and off-link ping from the affected subnet
  2. Demonstrate encrypted SSH or SFTP access and verify legacy cleartext services are no longer reachable from operator VLANs
  3. Observe correct per-VLAN MAC table entries and bidirectional local-frame forwarding during a test
  4. Check bridge root identity, port role and topology changes during a controlled link-failure simulation

Answer & Explanations

Correct answer: C

A.

This observation would verify a different remedy: Validate the subnet decision, ARP entry and routed gateway reachability for the actual target. That remedy applies to: A courthouse desktop can reach neighboring printers but not a service in another VLAN after an addressing change. The present condition is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. To assess it, check: Observe correct per-VLAN MAC table entries and bidirectional local-frame forwarding during a test.

B.

This observation would verify a different remedy: Replace cleartext remote login and transfer paths with an approved encrypted management protocol. That remedy applies to: A nonprofit's switch admins still push backups over FTP across a shared operations subnet. The present condition is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. To assess it, check: Observe correct per-VLAN MAC table entries and bidirectional local-frame forwarding during a test.

C.

Observe correct per-VLAN MAC table entries and bidirectional local-frame forwarding during a test. This check directly tests: Inspect VLAN membership and learned destination MAC locations before altering routing. The underlying behavior is: Ethernet switches learn source MAC locations within VLAN forwarding domains; an unknown unicast may flood until the destination is learned. The case is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally.

D.

This observation would verify a different remedy: Select an appropriate RSTP root and confirm alternate paths block until needed. That remedy applies to: A hotel joins two closet switches to two aggregation switches and broadcast counters surge. The present condition is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. To assess it, check: Observe correct per-VLAN MAC table entries and bidirectional local-frame forwarding during a test.

Question 28

A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally The team wants to implement an approved fix while avoiding a regression. Which proposed shortcut would most directly undermine a safe correction for this particular case?

  1. Clear all switch configurations when only the host's subnet mask is inconsistent
  2. Add a default route to fix two hosts that should communicate inside the same VLAN
  3. Keep Telnet enabled on every access switch for operational convenience
  4. Disable spanning tree because two uplinks appear to provide simple redundancy

Answer & Explanations

Correct answer: B

A.

This proposed shortcut concerns a separate case: A courthouse desktop can reach neighboring printers but not a service in another VLAN after an addressing change. The risk in this question concerns: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. Here the unsafe shortcut is: Add a default route to fix two hosts that should communicate inside the same VLAN. Use this response instead: Inspect VLAN membership and learned destination MAC locations before altering routing.

B.

Add a default route to fix two hosts that should communicate inside the same VLAN. This shortcut is unsafe for: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The resulting failure can be: Same-VLAN delivery continues failing while the route changes an unrelated Layer 3 path. The safer response is: Inspect VLAN membership and learned destination MAC locations before altering routing.

C.

This proposed shortcut concerns a separate case: A nonprofit's switch admins still push backups over FTP across a shared operations subnet. The risk in this question concerns: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. Here the unsafe shortcut is: Add a default route to fix two hosts that should communicate inside the same VLAN. Use this response instead: Inspect VLAN membership and learned destination MAC locations before altering routing.

D.

This proposed shortcut concerns a separate case: A hotel joins two closet switches to two aggregation switches and broadcast counters surge. The risk in this question concerns: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. Here the unsafe shortcut is: Add a default route to fix two hosts that should communicate inside the same VLAN. Use this response instead: Inspect VLAN membership and learned destination MAC locations before altering routing.

Question 29

A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally Suppose the team instead chooses this shortcut: Add a default route to fix two hosts that should communicate inside the same VLAN. If the team instead takes the following shortcut, what specific outcome is most likely?

  1. Same-VLAN delivery continues failing while the route changes an unrelated Layer 3 path
  2. Endpoints continue resolving the wrong Layer 2 next hop despite a configuration reset
  3. Shared-network observers can capture administrative sessions and the management plane stays exposed
  4. A physical loop triggers broadcast amplification and widespread instability

Answer & Explanations

Correct answer: A

A.

Same-VLAN delivery continues failing while the route changes an unrelated Layer 3 path. This is the risk in the stated situation: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The risky shortcut is: Add a default route to fix two hosts that should communicate inside the same VLAN. Prevent it by: Inspect VLAN membership and learned destination MAC locations before altering routing.

B.

This failure concerns another scenario: A courthouse desktop can reach neighboring printers but not a service in another VLAN after an addressing change. In the stated case: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The relevant consequence is: Same-VLAN delivery continues failing while the route changes an unrelated Layer 3 path. The control that prevents it is: Inspect VLAN membership and learned destination MAC locations before altering routing.

C.

This failure concerns another scenario: A nonprofit's switch admins still push backups over FTP across a shared operations subnet. In the stated case: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The relevant consequence is: Same-VLAN delivery continues failing while the route changes an unrelated Layer 3 path. The control that prevents it is: Inspect VLAN membership and learned destination MAC locations before altering routing.

D.

This failure concerns another scenario: A hotel joins two closet switches to two aggregation switches and broadcast counters surge. In the stated case: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The relevant consequence is: Same-VLAN delivery continues failing while the route changes an unrelated Layer 3 path. The control that prevents it is: Inspect VLAN membership and learned destination MAC locations before altering routing.

Question 30

A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally Before the team can inspect VLAN membership and learned destination MAC locations before altering routing, What must the team confirm before attempting the appropriate correction?

  1. Record the affected host address, mask, destination and gateway before intervention
  2. Confirm approved management endpoints, credentials and emergency access procedures
  3. Verify the topology and intended root placement before changing priority
  4. Verify both endpoint access ports belong to the intended broadcast domain

Answer & Explanations

Correct answer: D

A.

The offered prerequisite belongs to another condition: A courthouse desktop can reach neighboring printers but not a service in another VLAN after an addressing change. For the actual case: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. First establish: Verify both endpoint access ports belong to the intended broadcast domain. Then perform: Inspect VLAN membership and learned destination MAC locations before altering routing.

B.

The offered prerequisite belongs to another condition: A nonprofit's switch admins still push backups over FTP across a shared operations subnet. For the actual case: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. First establish: Verify both endpoint access ports belong to the intended broadcast domain. Then perform: Inspect VLAN membership and learned destination MAC locations before altering routing.

C.

The offered prerequisite belongs to another condition: A hotel joins two closet switches to two aggregation switches and broadcast counters surge. For the actual case: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. First establish: Verify both endpoint access ports belong to the intended broadcast domain. Then perform: Inspect VLAN membership and learned destination MAC locations before altering routing.

D.

Verify both endpoint access ports belong to the intended broadcast domain. This prerequisite is needed before the action: Inspect VLAN membership and learned destination MAC locations before altering routing. The relevant condition is: A laboratory has two same-VLAN instruments in adjacent switch closets but their frames are not being delivered locally. The underlying technical reason is: Ethernet switches learn source MAC locations within VLAN forwarding domains; an unknown unicast may flood until the destination is learned.

HPE Network Switching Associate (HPE6-A86) Practice Tests