Practice Exams:

Fortinet NSE5_SSE_AD-7.6 Dumps

EXAM: Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator
Verified By Experts
Premium Bundle
$49.99

NSE5_SSE_AD-7.6 Premium ETE File


  • Premium File 54 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Fortinet NSE5_SSE_AD-7.6 Practice Test 10

Question 90

A logistics firm wants a low-cost LTE circuit for guest traffic without exposing the dedicated finance overlay. Suppose the team follows this shortcut instead: Place a guest internet underlay into the protected private-WAN zone merely to make member selection simple. What is the most likely direct security or operational consequence?

  1. Duplicate networks and invalid gateways make branches unreachable or cause unpredictable traffic return
  2. Guest connections gain an unexpected eligible transport or fail zone-specific security matching
  3. Sensitive business sessions leave the approved private path and fail access or compliance checks
  4. Voice sessions remain on a poor-quality path despite another usable member

Answer & Explanations

Correct answer: B

A.

This failure concerns another scenario: A franchise duplicates the first store configuration and two stores unexpectedly advertise the same inside prefix. In the stated case: A logistics firm wants a low-cost LTE circuit for guest traffic without exposing the dedicated finance overlay. The relevant consequence is: Guest connections gain an unexpected eligible transport or fail zone-specific security matching. The control that prevents it is: Add eligible physical or tunnel WAN members to correctly named SD-WAN zones that match the organization network segmentation and security policy.

B.

Guest connections gain an unexpected eligible transport or fail zone-specific security matching. This is the risk in the stated situation: A logistics firm wants a low-cost LTE circuit for guest traffic without exposing the dedicated finance overlay. The risky shortcut is: Place a guest internet underlay into the protected private-WAN zone merely to make member selection simple. Prevent it by: Add eligible physical or tunnel WAN members to correctly named SD-WAN zones that match the organization network segmentation and security policy.

C.

This failure concerns another scenario: A manufacturer connects field offices to private ERP over IPsec but needs ordinary web access on the local ISP. In the stated case: A logistics firm wants a low-cost LTE circuit for guest traffic without exposing the dedicated finance overlay. The relevant consequence is: Guest connections gain an unexpected eligible transport or fail zone-specific security matching. The control that prevents it is: Add eligible physical or tunnel WAN members to correctly named SD-WAN zones that match the organization network segmentation and security policy.

D.

This failure concerns another scenario: A school uses two static internet routes but its classroom video app suffers during upstream loss. In the stated case: A logistics firm wants a low-cost LTE circuit for guest traffic without exposing the dedicated finance overlay. The relevant consequence is: Guest connections gain an unexpected eligible transport or fail zone-specific security matching. The control that prevents it is: Add eligible physical or tunnel WAN members to correctly named SD-WAN zones that match the organization network segmentation and security policy.

Question 91

A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. Which FortiSASE or Secure SD-WAN configuration or operating process best addresses the situation?

  1. Implement direct internet access through a FortiGate SD-WAN zone with explicit underlay members, firewall policy, NAT and health checks
  2. Create a baseline of SD-WAN member status, aggregate traffic, packet loss and eligible route reachability before tuning steering rules
  3. Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule
  4. Inventory LAN subnets, overlapping WAN addresses, default routes and SD-WAN policy dependencies before enrolling a FortiGate in a new branch design

Answer & Explanations

Correct answer: C

A.

This action is appropriate in a different case: A retailer adds two local broadband links but keeps its branch SaaS sessions pinned to a failed data-center backhaul. There, the reason is: A direct internet access design keeps eligible branch traffic local while SD-WAN selects healthy internet members; defining the zone alone does not grant traffic or translate private addresses. The current case is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The appropriate response is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

B.

This action is appropriate in a different case: A logistics branch reports intermittent internet loss although both ISP ports show up. There, the reason is: Member health and application path performance can differ from interface link state; an Ethernet up indicator alone cannot prove internet reachability or acceptable quality. The current case is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The appropriate response is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

C.

Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule. The technical reason is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability. The stated condition is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. Confirm the result by: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

D.

This action is appropriate in a different case: A franchise duplicates the first store configuration and two stores unexpectedly advertise the same inside prefix. There, the reason is: SD-WAN forwarding depends on valid routed underlay interfaces and correct address scope; duplicate subnets or stale routes can prevent return traffic even with acceptable link health. The current case is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The appropriate response is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

Question 92

A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. A Fortinet administrator recommends: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule. Which technical process explanation best justifies that recommendation?

  1. SD-WAN forwarding depends on valid routed underlay interfaces and correct address scope; duplicate subnets or stale routes can prevent return traffic even with acceptable link health
  2. Secure private routes and direct internet routes serve different data destinations; a default internet egress rule is not evidence that private traffic traverses the intended protected overlay
  3. Two static routes can provide route preference, but SD-WAN adds member health, measured SLA and service rules to control which qualifying path handles a flow
  4. An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability

Answer & Explanations

Correct answer: D

A.

This principle explains a different technical intervention: Inventory LAN subnets, overlapping WAN addresses, default routes and SD-WAN policy dependencies before enrolling a FortiGate in a new branch design. It applies to: A franchise duplicates the first store configuration and two stores unexpectedly advertise the same inside prefix. The actual case is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The mechanism relevant here is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability.

B.

This principle explains a different technical intervention: Define which branch destinations use secure overlay paths and which use local internet egress, then test scoped policies for both groups. It applies to: A manufacturer connects field offices to private ERP over IPsec but needs ordinary web access on the local ISP. The actual case is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The mechanism relevant here is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability.

C.

This principle explains a different technical intervention: Add WAN interfaces as SD-WAN members in the intended zone and use eligible routes and SD-WAN services instead of pretending a pair of static defaults offers application-aware steering. It applies to: A school uses two static internet routes but its classroom video app suffers during upstream loss. The actual case is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The mechanism relevant here is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability.

D.

An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability. That mechanism explains the decision: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule. In the reported situation: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. Confirmation requires: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

Question 93

A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. After the targeted configuration or process is implemented, which evidence most directly demonstrates the requested behavior?

  1. Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses
  2. Test two distinct applications and prove they select the intended member when both ISP routes remain reachable
  3. Inspect one approved test flow for both SD-WAN rule result and firewall policy/NAT acceptance
  4. Compare two target branch effective configurations and confirm install status and a real WAN path test

Answer & Explanations

Correct answer: A

A.

Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses. This check directly tests: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule. The underlying behavior is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability. The case is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association.

B.

This observation would verify a different remedy: Add WAN interfaces as SD-WAN members in the intended zone and use eligible routes and SD-WAN services instead of pretending a pair of static defaults offers application-aware steering. That remedy applies to: A school uses two static internet routes but its classroom video app suffers during upstream loss. The present condition is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. To assess it, check: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

C.

This observation would verify a different remedy: Create the required FortiGate security policy and source NAT for flows traversing the SD-WAN zone after defining membership and steering. That remedy applies to: An ecommerce branch sets the ideal SD-WAN service rule but its browser traffic still hits implicit deny. The present condition is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. To assess it, check: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

D.

This observation would verify a different remedy: Use approved FortiManager templates and per-branch parameters to deploy FortiOS SD-WAN settings to the intended device groups with preview and rollback. That remedy applies to: An MSP updates one regional template but accidentally targets all customer FortiGates. The present condition is: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. To assess it, check: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

Question 94

A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. Which apparently convenient shortcut would most directly undermine the required control?

  1. Install a modified global SD-WAN template to every branch without validating local WAN interface references
  2. Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects
  3. Raise every SD-WAN rule priority to fix an ISP handoff with no reachable gateway
  4. Use a universal zero-loss threshold based on a single quiet sample for every WAN circuit

Answer & Explanations

Correct answer: B

A.

This proposed shortcut concerns a separate case: An MSP updates one regional template but accidentally targets all customer FortiGates. The risk in this question concerns: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. Here the unsafe shortcut is: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. Use this response instead: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

B.

Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. This shortcut is unsafe for: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The resulting failure can be: Private destinations become unreachable or traffic bypasses the intended encrypted overlay. The safer response is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

C.

This proposed shortcut concerns a separate case: A manufacturer cannot reach any destination through its new broadband circuit and assumes application steering is wrong. The risk in this question concerns: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. Here the unsafe shortcut is: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. Use this response instead: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

D.

This proposed shortcut concerns a separate case: A call center's voice quality deteriorates when ISP loss rises despite a green interface LED. The risk in this question concerns: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. Here the unsafe shortcut is: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. Use this response instead: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

Question 95

A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. Suppose the team follows this shortcut instead: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. What is the most likely direct security or operational consequence?

  1. Normal transient packet drops trigger unnecessary path flapping
  2. Voice and collaboration experience persistent delay while an alternative faster path exists
  3. Private destinations become unreachable or traffic bypasses the intended encrypted overlay
  4. Conference calls stutter despite an apparently normal average latency graph

Answer & Explanations

Correct answer: C

A.

This failure concerns another scenario: A call center's voice quality deteriorates when ISP loss rises despite a green interface LED. In the stated case: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The relevant consequence is: Private destinations become unreachable or traffic bypasses the intended encrypted overlay. The control that prevents it is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

B.

This failure concerns another scenario: A satellite backup has more capacity but causes long voice delays compared with local fiber. In the stated case: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The relevant consequence is: Private destinations become unreachable or traffic bypasses the intended encrypted overlay. The control that prevents it is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

C.

Private destinations become unreachable or traffic bypasses the intended encrypted overlay. This is the risk in the stated situation: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The risky shortcut is: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. Prevent it by: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

D.

This failure concerns another scenario: A hospital's Wi-Fi calling backhaul suffers unstable delay on an overloaded ISP. In the stated case: A regional bank uses IPsec overlays above two ISPs and one overlay loses its encryption association. The relevant consequence is: Private destinations become unreachable or traffic bypasses the intended encrypted overlay. The control that prevents it is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

Question 96

A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. Which FortiSASE or Secure SD-WAN configuration or operating process best addresses the situation?

  1. Create the required FortiGate security policy and source NAT for flows traversing the SD-WAN zone after defining membership and steering
  2. Use approved FortiManager templates and per-branch parameters to deploy FortiOS SD-WAN settings to the intended device groups with preview and rollback
  3. Check interface link, gateway ARP, SD-WAN member status, health-check results, route selection and security policy in that order before changing service priorities
  4. Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule

Answer & Explanations

Correct answer: D

A.

This action is appropriate in a different case: An ecommerce branch sets the ideal SD-WAN service rule but its browser traffic still hits implicit deny. There, the reason is: SD-WAN path selection and firewall session authorization are separate stages, so a correct member decision does not imply policy allows or NAT translates the traffic. The current case is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The appropriate response is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

B.

This action is appropriate in a different case: An MSP updates one regional template but accidentally targets all customer FortiGates. There, the reason is: Centralized templates reduce drift, but device-specific interfaces, gateway addresses and overlay identities must resolve correctly before installation. The current case is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The appropriate response is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

C.

This action is appropriate in a different case: A manufacturer cannot reach any destination through its new broadband circuit and assumes application steering is wrong. There, the reason is: A broken next-hop adjacency, failed SLA target, missing route and firewall deny can look like the same user outage but require different remedies. The current case is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The appropriate response is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

D.

Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule. The technical reason is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability. The stated condition is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. Confirm the result by: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

Question 97

A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. A Fortinet administrator recommends: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule. Which technical process explanation best justifies that recommendation?

  1. An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability
  2. A broken next-hop adjacency, failed SLA target, missing route and firewall deny can look like the same user outage but require different remedies
  3. Link loss measured through an active health check can indicate poor transport quality before the physical interface goes down
  4. Latency measurements let a service rule reject a slow but reachable member; bandwidth by itself does not prove acceptable round-trip delay

Answer & Explanations

Correct answer: A

A.

An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability. That mechanism explains the decision: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule. In the reported situation: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. Confirmation requires: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

B.

This principle explains a different technical intervention: Check interface link, gateway ARP, SD-WAN member status, health-check results, route selection and security policy in that order before changing service priorities. It applies to: A manufacturer cannot reach any destination through its new broadband circuit and assumes application steering is wrong. The actual case is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The mechanism relevant here is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability.

C.

This principle explains a different technical intervention: Define an SD-WAN performance SLA with justified packet loss tolerance and healthy probe targets for the critical application. It applies to: A call center's voice quality deteriorates when ISP loss rises despite a green interface LED. The actual case is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The mechanism relevant here is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability.

D.

This principle explains a different technical intervention: Set latency targets and destination probes appropriate for delay-sensitive services, then associate the SLA with the intended SD-WAN rule. It applies to: A satellite backup has more capacity but causes long voice delays compared with local fiber. The actual case is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The mechanism relevant here is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability.

Question 98

A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. After the targeted configuration or process is implemented, which evidence most directly demonstrates the requested behavior?

  1. Increase test-link delay deliberately and inspect SLA status plus selected route for a VoIP trial call
  2. Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses
  3. Introduce bounded variable delay in a lab and confirm SLA breach, rule behavior and audio recovery
  4. Compare probe response with actual protected application reachability using one permitted route and a second reference target

Answer & Explanations

Correct answer: B

A.

This observation would verify a different remedy: Set latency targets and destination probes appropriate for delay-sensitive services, then associate the SLA with the intended SD-WAN rule. That remedy applies to: A satellite backup has more capacity but causes long voice delays compared with local fiber. The present condition is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. To assess it, check: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

B.

Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses. This check directly tests: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule. The underlying behavior is: An IPsec tunnel can be an SD-WAN member only while its secure overlay and underlying route are usable; a physical interface being up does not prove tunnel reachability. The case is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member.

C.

This observation would verify a different remedy: Use performance SLA jitter thresholds to decide whether a real-time application should stay on an eligible member. That remedy applies to: A hospital's Wi-Fi calling backhaul suffers unstable delay on an overloaded ISP. The present condition is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. To assess it, check: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

D.

This observation would verify a different remedy: Configure SD-WAN probes to stable reachable targets that reflect the actual destination path and avoid reliance on a single unsuitable public service. That remedy applies to: A hospital's encrypted private circuit probes an unrelated public address and is marked down. The present condition is: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. To assess it, check: Check tunnel negotiation and a private-address probe while monitoring underlay and overlay member statuses.

Question 99

A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. Which apparently convenient shortcut would most directly undermine the required control?

  1. Use a public DNS host that blocks ICMP as the sole health target for a private MPLS service
  2. Disable a working backup circuit completely because it fails a strict voice SLA even though backups tolerate its latency
  3. Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects
  4. Configure immediate route switching on any single lost probe across all branch members

Answer & Explanations

Correct answer: C

A.

This proposed shortcut concerns a separate case: A hospital's encrypted private circuit probes an unrelated public address and is marked down. The risk in this question concerns: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. Here the unsafe shortcut is: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. Use this response instead: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

B.

This proposed shortcut concerns a separate case: An office has one slow LTE link suitable for email but unsuitable for voice. The risk in this question concerns: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. Here the unsafe shortcut is: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. Use this response instead: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

C.

Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. This shortcut is unsafe for: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The resulting failure can be: Private destinations become unreachable or traffic bypasses the intended encrypted overlay. The safer response is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

D.

This proposed shortcut concerns a separate case: A clinic's WAN swaps every minute when one ping is delayed. The risk in this question concerns: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. Here the unsafe shortcut is: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. Use this response instead: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

Question 100

A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. Suppose the team follows this shortcut instead: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. What is the most likely direct security or operational consequence?

  1. Brief congestion produces constant path changes and interruptive user sessions
  2. Poor paths remain selected for critical applications despite accurate SLA graphs
  3. Applications reset during an unstable restoration and path churn increases
  4. Private destinations become unreachable or traffic bypasses the intended encrypted overlay

Answer & Explanations

Correct answer: D

A.

This failure concerns another scenario: A clinic's WAN swaps every minute when one ping is delayed. In the stated case: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The relevant consequence is: Private destinations become unreachable or traffic bypasses the intended encrypted overlay. The control that prevents it is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

B.

This failure concerns another scenario: A branch creates a jitter SLA yet its VoIP traffic still follows the old generic rule. In the stated case: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The relevant consequence is: Private destinations become unreachable or traffic bypasses the intended encrypted overlay. The control that prevents it is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

C.

This failure concerns another scenario: A bank's primary ISP recovers but the service continues selecting a backup for new sessions. In the stated case: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The relevant consequence is: Private destinations become unreachable or traffic bypasses the intended encrypted overlay. The control that prevents it is: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

D.

Private destinations become unreachable or traffic bypasses the intended encrypted overlay. This is the risk in the stated situation: A factory adds a physical fiber uplink and mistakenly treats it as the ready-to-use private VPN member. The risky shortcut is: Steer protected application traffic directly onto an internet physical port after its IPsec tunnel disconnects. Prevent it by: Register the correct SD-WAN member interface type and tunnel dependency before selecting an overlay or internet underlay in a service rule.

Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator (NSE5_SSE_AD-7.6) Practice Tests