Practice Exams:

Fortinet FCP_FGT_AD-7.6 Dumps

EXAM: FCP - FortiGate 7.6 Administrator
Verified By Experts
Premium Bundle
$49.99

FCP_FGT_AD-7.6 Premium ETE File


  • Premium File 128 Questions & Answers
Whats Included:
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

Fortinet FCP_FGT_AD-7.6 Practice Test 3

Question 20

A laboratory just restored a spare FortiGate and needs evidence that licensed signature updates resumed before accepting patient data flows. Which combined implementation and verification plan most reliably resolves this specific FortiOS 7.6 issue?

  1. For the laboratory just deployment: Implement: Select the required traffic logging mode on a matching firewall policy and send logs to an authorized supported collector. Verify: Generate a permitted test session, then locate its policy ID, source, destination, action and timestamp in FortiGate or FortiAnalyzer traffic logs.
  2. For the laboratory just deployment: Implement: Limit administrative HTTPS and SSH access to dedicated management interfaces and trusted administrator source addresses. Verify: Inspect license and update status, force an authorized rating or signature lookup, and confirm its status in logs.
  3. For the laboratory just deployment: Implement: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services. Verify: Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.
  4. For the laboratory just deployment: Implement: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services. Verify: Inspect license and update status, force an authorized rating or signature lookup, and confirm its status in logs.

Answer & Explanations

Correct answer: D

A.

The situation is that a laboratory just restored a spare FortiGate and needs evidence that licensed signature updates resumed before accepting patient data flows. This action and check address the distinct objective “Enable traceable traffic logging on relevant policies” instead of the stated acceptance requirement. The matching action is to register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services. Its confirming test is to inspect license and update status, force an authorized rating or signature lookup, and confirm its status in logs.

B.

This action and check address the alternate operation “For the laboratory just deployment: Implement: Limit administrative HTTPS and SSH access to dedicated management interfaces and trusted administrator…” instead of the stated acceptance requirement. The matching action is to register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services. Its confirming test is to inspect license and update status, force an authorized rating or signature lookup, and confirm its status in logs.

C.

This action and check address the alternate operation “For the laboratory just deployment: Implement: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying…” instead of the stated acceptance requirement. The matching action is to register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services. Its confirming test is to inspect license and update status, force an authorized rating or signature lookup, and confirm its status in logs.

D.

The situation is that a laboratory just restored a spare FortiGate and needs evidence that licensed signature updates resumed before accepting patient data flows. Implement: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services. Verify: Inspect license and update status, force an authorized rating or signature lookup, and confirm its status in logs. This pairing is justified because FortiGuard-backed ratings and signature services depend on valid entitlements and reachability; an installed security profile alone does not guarantee fresh intelligence.

Question 21

A small printing plant needs a new isolated scanner VLAN whose workstations receive leases from the branch FortiGate. Which FortiOS 7.6 administrative change best meets this requirement without weakening unrelated controls?

  1. For the small printing plant deployment: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses.
  2. For the small printing plant deployment: Select the required traffic logging mode on a matching firewall policy and send logs to an authorized supported collector.
  3. For the small printing plant deployment: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services.
  4. For the small printing plant deployment: Limit administrative HTTPS and SSH access to dedicated management interfaces and trusted administrator source addresses.

Answer & Explanations

Correct answer: A

A.

Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. This resolves the issue because DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes. To verify, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

B.

This option addresses the distinct objective “Enable traceable traffic logging on relevant policies”, not the immediate requirement. FortiGate log generation depends on policy logging configuration and a working destination or local storage path; a permitted session may otherwise leave no useful traffic evidence. For the stated case, DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

C.

This option addresses the distinct objective “Register FortiGuard licensing before profile rollout”, not the immediate requirement. FortiGuard-backed ratings and signature services depend on valid entitlements and reachability; an installed security profile alone does not guarantee fresh intelligence. For the stated case, DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

D.

This option addresses the distinct objective “Restrict FortiGate administrative access”, not the immediate requirement. Administrative access settings and per-administrator trusted hosts restrict management exposure independently of transit firewall rules. For the stated case, DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

Question 22

A small printing plant needs a new isolated scanner VLAN whose workstations receive leases from the branch FortiGate. The engineer proposes this change: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses Which explanation most accurately establishes why that change meets the operational requirement?

  1. For the small printing plant deployment: FortiGate log generation depends on policy logging configuration and a working destination or local storage path; a permitted session may otherwise leave no useful traffic evidence.
  2. For the small printing plant deployment: DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.
  3. For the small printing plant deployment: FortiGuard-backed ratings and signature services depend on valid entitlements and reachability; an installed security profile alone does not guarantee fresh intelligence.
  4. For the small printing plant deployment: Administrative access settings and per-administrator trusted hosts restrict management exposure independently of transit firewall rules.

Answer & Explanations

Correct answer: B

A.

That statement explains the distinct objective “Enable traceable traffic logging on relevant policies” rather than the cause in this case. The deciding mechanism here is that DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

B.

DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes. It supports this action: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. To confirm, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

C.

That statement explains the distinct objective “Register FortiGuard licensing before profile rollout” rather than the cause in this case. The deciding mechanism here is that DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

D.

That statement explains the distinct objective “Restrict FortiGate administrative access” rather than the cause in this case. The deciding mechanism here is that DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

Question 23

A small printing plant needs a new isolated scanner VLAN whose workstations receive leases from the branch FortiGate. After implementing this change—Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses—which test best establishes that the intended outcome is actually working?

  1. For the small printing plant deployment: Generate a permitted test session, then locate its policy ID, source, destination, action and timestamp in FortiGate or FortiAnalyzer traffic logs.
  2. For the small printing plant deployment: Inspect license and update status, force an authorized rating or signature lookup, and confirm its status in logs.
  3. For the small printing plant deployment: Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.
  4. For the small printing plant deployment: From an approved management station open the GUI or SSH, then verify the same login attempt is rejected from a nontrusted subnet.

Answer & Explanations

Correct answer: C

A.

This check would help evaluate the distinct objective “Enable traceable traffic logging on relevant policies”, but not the required result. For this case, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

B.

This check would help evaluate the distinct objective “Register FortiGuard licensing before profile rollout”, but not the required result. For this case, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

C.

Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table. This is the relevant test because DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

D.

This check would help evaluate the distinct objective “Restrict FortiGate administrative access”, but not the required result. For this case, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

Question 24

A small printing plant needs a new isolated scanner VLAN whose workstations receive leases from the branch FortiGate. Which proposed shortcut would most directly cause duplicate-address conflicts and clients receiving a gateway outside their own segment, and therefore must be avoided for this requirement?

  1. For the small printing plant deployment: Assume copying an antivirus or web-filter profile automatically activates all associated FortiGuard subscriptions.
  2. For the small printing plant deployment: Expose management HTTPS on every internet-facing interface to speed remote support.
  3. For the small printing plant deployment: Enable system event logs only and assume they document every permitted user session.
  4. For the small printing plant deployment: Copy the production DHCP range onto another VLAN without changing gateway or exclusions.

Answer & Explanations

Correct answer: D

A.

That shortcut would relate to the distinct objective “Register FortiGuard licensing before profile rollout”, rather than the specific configuration or use described. The unsafe step in this case is to copy the production DHCP range onto another VLAN without changing gateway or exclusions.

B.

That shortcut would relate to the distinct objective “Restrict FortiGate administrative access”, rather than the specific configuration or use described. The unsafe step in this case is to copy the production DHCP range onto another VLAN without changing gateway or exclusions.

C.

That shortcut would relate to the distinct objective “Enable traceable traffic logging on relevant policies”, rather than the specific configuration or use described. The unsafe step in this case is to copy the production DHCP range onto another VLAN without changing gateway or exclusions.

D.

Copy the production DHCP range onto another VLAN without changing gateway or exclusions. The proposed shortcut bypasses the needed control: DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes. The appropriate response is to enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses.

Question 25

A small printing plant needs a new isolated scanner VLAN whose workstations receive leases from the branch FortiGate. Which combined implementation and verification plan most reliably resolves this specific FortiOS 7.6 issue?

  1. For the small printing plant deployment: Implement: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Verify: Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.
  2. For the small printing plant deployment: Implement: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services. Verify: Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.
  3. For the small printing plant deployment: Implement: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Verify: From an approved management station open the GUI or SSH, then verify the same login attempt is rejected from a nontrusted subnet.
  4. For the small printing plant deployment: Implement: Select the required traffic logging mode on a matching firewall policy and send logs to an authorized supported collector. Verify: Generate a permitted test session, then locate its policy ID, source, destination, action and timestamp in FortiGate or FortiAnalyzer traffic logs.

Answer & Explanations

Correct answer: A

A.

Implement: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Verify: Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table. This pairing is justified because DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

B.

This action and check address the alternate operation “For the small printing plant deployment: Implement: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before…” instead of the stated acceptance requirement. The matching action is to enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Its confirming test is to lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

C.

This action and check address the alternate operation “For the small printing plant deployment: Implement: Enable the FortiGate DHCP server on the intended LAN interface with a…” instead of the stated acceptance requirement. The matching action is to enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Its confirming test is to lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

D.

This action and check address the distinct objective “Enable traceable traffic logging on relevant policies” instead of the stated acceptance requirement. The matching action is to enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Its confirming test is to lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

Question 26

A research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. Which FortiOS 7.6 administrative change best meets this requirement without weakening unrelated controls?

  1. For the research center deployment: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services.
  2. For the research center deployment: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses.
  3. For the research center deployment: Limit administrative HTTPS and SSH access to dedicated management interfaces and trusted administrator source addresses.
  4. For the research center deployment: Select the required traffic logging mode on a matching firewall policy and send logs to an authorized supported collector.

Answer & Explanations

Correct answer: B

A.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. This option addresses the distinct objective “Register FortiGuard licensing before profile rollout”, not the immediate requirement. FortiGuard-backed ratings and signature services depend on valid entitlements and reachability; an installed security profile alone does not guarantee fresh intelligence. For the stated case, DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

B.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. This resolves the issue because DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes. To verify, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

C.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. This option addresses the distinct objective “Restrict FortiGate administrative access”, not the immediate requirement. Administrative access settings and per-administrator trusted hosts restrict management exposure independently of transit firewall rules. For the stated case, DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

D.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. This option addresses the distinct objective “Enable traceable traffic logging on relevant policies”, not the immediate requirement. FortiGate log generation depends on policy logging configuration and a working destination or local storage path; a permitted session may otherwise leave no useful traffic evidence. For the stated case, DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

Question 27

A research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. The engineer proposes this change: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses Which explanation most accurately establishes why that change meets the operational requirement?

  1. For the research center deployment: FortiGuard-backed ratings and signature services depend on valid entitlements and reachability; an installed security profile alone does not guarantee fresh intelligence.
  2. For the research center deployment: Administrative access settings and per-administrator trusted hosts restrict management exposure independently of transit firewall rules.
  3. For the research center deployment: DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.
  4. For the research center deployment: FortiGate log generation depends on policy logging configuration and a working destination or local storage path; a permitted session may otherwise leave no useful traffic evidence.

Answer & Explanations

Correct answer: C

A.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. That statement explains the distinct objective “Register FortiGuard licensing before profile rollout” rather than the cause in this case. The deciding mechanism here is that DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

B.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. That statement explains the distinct objective “Restrict FortiGate administrative access” rather than the cause in this case. The deciding mechanism here is that DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

C.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes. It supports this action: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. To confirm, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

D.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. That statement explains the distinct objective “Enable traceable traffic logging on relevant policies” rather than the cause in this case. The deciding mechanism here is that DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

Question 28

A research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. After implementing this change—Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses—which test best establishes that the intended outcome is actually working?

  1. For the research center deployment: From an approved management station open the GUI or SSH, then verify the same login attempt is rejected from a nontrusted subnet.
  2. For the research center deployment: Generate a permitted test session, then locate its policy ID, source, destination, action and timestamp in FortiGate or FortiAnalyzer traffic logs.
  3. For the research center deployment: Inspect license and update status, force an authorized rating or signature lookup, and confirm its status in logs.
  4. For the research center deployment: Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

Answer & Explanations

Correct answer: D

A.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. This check would help evaluate the distinct objective “Restrict FortiGate administrative access”, but not the required result. For this case, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

B.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. This check would help evaluate the distinct objective “Enable traceable traffic logging on relevant policies”, but not the required result. For this case, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

C.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. This check would help evaluate the distinct objective “Register FortiGuard licensing before profile rollout”, but not the required result. For this case, lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

D.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table. This is the relevant test because DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

Question 29

A research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. Which proposed shortcut would most directly cause duplicate-address conflicts and clients receiving a gateway outside their own segment, and therefore must be avoided for this requirement?

  1. For the research center deployment: Copy the production DHCP range onto another VLAN without changing gateway or exclusions.
  2. For the research center deployment: Expose management HTTPS on every internet-facing interface to speed remote support.
  3. For the research center deployment: Enable system event logs only and assume they document every permitted user session.
  4. For the research center deployment: Assume copying an antivirus or web-filter profile automatically activates all associated FortiGuard subscriptions.

Answer & Explanations

Correct answer: A

A.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. Copy the production DHCP range onto another VLAN without changing gateway or exclusions. The proposed shortcut bypasses the needed control: DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes. The appropriate response is to enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses.

B.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. That shortcut would relate to the distinct objective “Restrict FortiGate administrative access”, rather than the specific configuration or use described. The unsafe step in this case is to copy the production DHCP range onto another VLAN without changing gateway or exclusions.

C.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. That shortcut would relate to the distinct objective “Enable traceable traffic logging on relevant policies”, rather than the specific configuration or use described. The unsafe step in this case is to copy the production DHCP range onto another VLAN without changing gateway or exclusions.

D.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. That shortcut would relate to the distinct objective “Register FortiGuard licensing before profile rollout”, rather than the specific configuration or use described. The unsafe step in this case is to copy the production DHCP range onto another VLAN without changing gateway or exclusions.

Question 30

A research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. Which combined implementation and verification plan most reliably resolves this specific FortiOS 7.6 issue?

  1. For the research center deployment: Implement: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Verify: From an approved management station open the GUI or SSH, then verify the same login attempt is rejected from a nontrusted subnet.
  2. For the research center deployment: Implement: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Verify: Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.
  3. For the research center deployment: Implement: Select the required traffic logging mode on a matching firewall policy and send logs to an authorized supported collector. Verify: Generate a permitted test session, then locate its policy ID, source, destination, action and timestamp in FortiGate or FortiAnalyzer traffic logs.
  4. For the research center deployment: Implement: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying on licensed security services. Verify: Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

Answer & Explanations

Correct answer: B

A.

This action and check address the alternate operation “For the research center deployment: Implement: Enable the FortiGate DHCP server on the intended LAN interface with a scoped…” instead of the stated acceptance requirement. The matching action is to enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Its confirming test is to lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

B.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. Implement: Enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Verify: Lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table. This pairing is justified because DHCP offers are sourced from the configured interface scope; overlapping static reservations or wrong options can create address conflicts and unusable client routes.

C.

The situation is that a research center is moving guest devices off an old router and must preserve fixed addresses reserved for network printers. This action and check address the distinct objective “Enable traceable traffic logging on relevant policies” instead of the stated acceptance requirement. The matching action is to enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Its confirming test is to lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

D.

This action and check address the alternate operation “For the research center deployment: Implement: Register the FortiGate and verify applicable FortiGuard subscriptions and update connectivity before relying…” instead of the stated acceptance requirement. The matching action is to enable the FortiGate DHCP server on the intended LAN interface with a scoped pool, correct gateway and DNS values, and excluded static addresses. Its confirming test is to lease a test device on the target VLAN, inspect the allocated address, default gateway and DNS, and check the FortiGate lease table.

FCP - FortiGate 7.6 Administrator (FCP_FGT_AD-7.6) Practice Tests