Practice Exams:

Cisco 400-007 Dumps

EXAM: Cisco Certified Design Expert
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

400-007 Premium Bundle


  • Premium File 349 Questions & Answers
  • Study Guide 934 Pages

Cisco 400-007 Practice Test 55

Question 540

A network design team is assessing this customer situation: An enterprise moves chatbot inference from centralized cloud to campus edge and changes request sizes. An approved alternate path exists, but its cost and policy limits differ. Which failure is the most direct risk of taking the tempting design shortcut?

  1. Clients can install malicious routes despite secured IPv4 DHCP
  2. Frequent access events can trigger unnecessary network-wide SPF recalculations
  3. Critical applications can fail because discretionary workloads occupy the surviving capacity
  4. Saturation or forbidden data movement can defeat the expected business value

Answer & Explanations

Correct answer: D

A.

The offered consequence belongs to the alternative control path: Design first-hop protections for router advertisements and neighbor discovery on supported access switches. The relevant failure for the current situation is: Saturation or forbidden data movement can defeat the expected business value. The distinction follows from: Inference access, training refresh and data transfer create different east-west and WAN demands.

B.

The offered consequence belongs to the alternative control path: Create area boundaries and resilient ABRs that localize topology changes without isolating reachability. The relevant failure for the current situation is: Saturation or forbidden data movement can defeat the expected business value. The distinction follows from: Inference access, training refresh and data transfer create different east-west and WAN demands.

C.

The offered consequence belongs to the alternative control path: Translate business service tiers into differentiated routing, QoS and failover acceptance criteria. The relevant failure for the current situation is: Saturation or forbidden data movement can defeat the expected business value. The distinction follows from: Inference access, training refresh and data transfer create different east-west and WAN demands.

D.

Saturation or forbidden data movement can defeat the expected business value. That is the risk in the reported situation—An enterprise moves chatbot inference from centralized cloud to campus edge and changes request sizes. The corrective action is: Place inference and synchronization paths according to latency, bandwidth, privacy and model update patterns. Technical basis: Inference access, training refresh and data transfer create different east-west and WAN demands.

Question 541

In a separate customer architecture review, this issue arises: A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes. Recovery operations depend on teams in different geographic regions. Which technical rationale best explains the proposed design choice under these constraints?

  1. Inference access, training refresh and data transfer create different east-west and WAN demands
  2. Probabilistic prediction should not replace deterministic routing safety and change authorization
  3. BGP adjacency establishment does not validate route provenance or the intended business scope
  4. BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent

Answer & Explanations

Correct answer: A

A.

Inference access, training refresh and data transfer create different east-west and WAN demands. This explains the action: Place inference and synchronization paths according to latency, bandwidth, privacy and model update patterns. For the described facts—A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes—test the outcome through: Real end-user inference and model refresh tests meet tail-latency and data-governance limits.

B.

The alternative principle is: Probabilistic prediction should not replace deterministic routing safety and change authorization. It instead explains this action: Use AI recommendations as evidence with simulation and gated human-controlled network changes. For the present requirement, the controlling mechanism is: Inference access, training refresh and data transfer create different east-west and WAN demands.

C.

The alternative principle is: BGP adjacency establishment does not validate route provenance or the intended business scope. It instead explains this action: Apply explicit import and export prefix and AS-path policies plus maximum-prefix safeguards. For the present requirement, the controlling mechanism is: Inference access, training refresh and data transfer create different east-west and WAN demands.

D.

The alternative principle is: BGP selects paths by policy attributes; physical bandwidth alone cannot express compliant reachability intent. It instead explains this action: Implement documented local preference and community policy at controlled BGP boundaries. For the present requirement, the controlling mechanism is: Inference access, training refresh and data transfer create different east-west and WAN demands. The scenario is: A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes.

Question 542

In a separate customer architecture review, this issue arises: A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes. Recovery operations depend on teams in different geographic regions. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?

  1. Negative tests reject unauthorized routes while approved prefixes propagate with bounded state
  2. Real end-user inference and model refresh tests meet tail-latency and data-governance limits
  3. A controlled degradation preserves priority application SLOs while noncritical transfers yield predictably
  4. Pilot branches pass legacy and new path tests with no persistent loops or unintended route leaks

Answer & Explanations

Correct answer: B

A.

The offered observation would test: Apply explicit import and export prefix and AS-path policies plus maximum-prefix safeguards. It would not establish that the stated requirement has been met. The direct evidence needed here is: Real end-user inference and model refresh tests meet tail-latency and data-governance limits.

B.

Direct verification: Real end-user inference and model refresh tests meet tail-latency and data-governance limits. This is the relevant evidence for the action: Place inference and synchronization paths according to latency, bandwidth, privacy and model update patterns. The reason is: Inference access, training refresh and data transfer create different east-west and WAN demands. The scenario is: A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes.

C.

The offered observation would test: Translate business service tiers into differentiated routing, QoS and failover acceptance criteria. It would not establish that the stated requirement has been met. The direct evidence needed here is: Real end-user inference and model refresh tests meet tail-latency and data-governance limits.

D.

The offered observation would test: Use a time-bounded dual-running migration with explicit route authority and per-site cutover controls. It would not establish that the stated requirement has been met. The direct evidence needed here is: Real end-user inference and model refresh tests meet tail-latency and data-governance limits.

Question 543

In a separate customer architecture review, this issue arises: A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes. Recovery operations depend on teams in different geographic regions. Which failure is the most direct risk of taking the tempting design shortcut?

  1. A model false positive can propagate a widespread outage or violate an SLA
  2. Clients can install malicious routes despite secured IPv4 DHCP
  3. Saturation or forbidden data movement can defeat the expected business value
  4. Critical applications can fail because discretionary workloads occupy the surviving capacity

Answer & Explanations

Correct answer: C

A.

The offered consequence belongs to the alternative control path: Use AI recommendations as evidence with simulation and gated human-controlled network changes. The relevant failure for the current situation is: Saturation or forbidden data movement can defeat the expected business value. The distinction follows from: Inference access, training refresh and data transfer create different east-west and WAN demands.

B.

The offered consequence belongs to the alternative control path: Design first-hop protections for router advertisements and neighbor discovery on supported access switches. The relevant failure for the current situation is: Saturation or forbidden data movement can defeat the expected business value. The distinction follows from: Inference access, training refresh and data transfer create different east-west and WAN demands. The scenario is: A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes.

C.

Saturation or forbidden data movement can defeat the expected business value. That is the risk in the reported situation—A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes. The corrective action is: Place inference and synchronization paths according to latency, bandwidth, privacy and model update patterns. Technical basis: Inference access, training refresh and data transfer create different east-west and WAN demands.

D.

The offered consequence belongs to the alternative control path: Translate business service tiers into differentiated routing, QoS and failover acceptance criteria. The relevant failure for the current situation is: Saturation or forbidden data movement can defeat the expected business value. The distinction follows from: Inference access, training refresh and data transfer create different east-west and WAN demands. The scenario is: A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes.

Question 544

In a separate customer architecture review, this issue arises: A regulated bank deploys a local model requiring frequent secure updates to remote GPU nodes. Recovery operations depend on teams in different geographic regions. Which prerequisite should the architect confirm before choosing and defending this design?

  1. Inventory L2 adjacency, redundant links, STP role and legitimate endpoint mobility needs
  2. Specify training data limits, explainability needs, policy invariants and rollback
  3. Define traffic classes, upstream policy, local preference scope and failover requirements
  4. Measure token and payload patterns, model placement, accelerator interconnect and policy

Answer & Explanations

Correct answer: D

A.

The offered preparation belongs with the alternative action: Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards. Here the necessary starting condition is: Measure token and payload patterns, model placement, accelerator interconnect and policy. It supports: Place inference and synchronization paths according to latency, bandwidth, privacy and model update patterns.

B.

The offered preparation belongs with the alternative action: Use AI recommendations as evidence with simulation and gated human-controlled network changes. Here the necessary starting condition is: Measure token and payload patterns, model placement, accelerator interconnect and policy. It supports: Place inference and synchronization paths according to latency, bandwidth, privacy and model update patterns.

C.

The offered preparation belongs with the alternative action: Implement documented local preference and community policy at controlled BGP boundaries. Here the necessary starting condition is: Measure token and payload patterns, model placement, accelerator interconnect and policy. It supports: Place inference and synchronization paths according to latency, bandwidth, privacy and model update patterns.

D.

The necessary starting condition is: Measure token and payload patterns, model placement, accelerator interconnect and policy. This enables the action: Place inference and synchronization paths according to latency, bandwidth, privacy and model update patterns. Validate the result with: Real end-user inference and model refresh tests meet tail-latency and data-governance limits.

Question 545

A network design team is assessing this customer situation: A network team enables very aggressive BFD detection across a congested transport circuit. Changes to security policy must be approved by an independent owner. Which high-level network design choice most directly meets the stated technical and operational requirement?

  1. Tune BFD intervals to measured platform and transport behavior with appropriate headroom
  2. Apply explicit import and export prefix and AS-path policies plus maximum-prefix safeguards
  3. Define prechange snapshots, staged checkpoints and objective rollback triggers for each dependency
  4. Design independently powered, physically separated paths with tested software and device fate boundaries

Answer & Explanations

Correct answer: A

A.

Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion. For the documented situation—A network team enables very aggressive BFD detection across a congested transport circuit—the targeted response is: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Check: Load tests show timely real-failure detection and stable adjacency through expected delay variation.

B.

The alternative addresses a different technical concern: BGP adjacency establishment does not validate route provenance or the intended business scope. The governing mechanism here is: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion. Accordingly, use: Tune BFD intervals to measured platform and transport behavior with appropriate headroom.

C.

Explicit go/no-go measurements allow reversible progress before hidden state diverges too far. That supports the alternative intervention: Define prechange snapshots, staged checkpoints and objective rollback triggers for each dependency. The present situation—A network team enables very aggressive BFD detection across a congested transport circuit—instead calls for: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Technical basis: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

D.

The alternative addresses: Design independently powered, physically separated paths with tested software and device fate boundaries. Its principle is: Redundant device counts are insufficient when resources share correlated failure modes. In this case the needed action is: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Confirm by: Load tests show timely real-failure detection and stable adjacency through expected delay variation.

Question 546

A network design team is assessing this customer situation: A network team enables very aggressive BFD detection across a congested transport circuit. Changes to security policy must be approved by an independent owner. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?

  1. A simulated component failure uses the required exception route and prevents forwarding into a summary black hole
  2. Load tests show timely real-failure detection and stable adjacency through expected delay variation
  3. A timed rehearsal restores original forwarding, ACL policy and sessions after a declared abort event
  4. Negative tests reject unauthorized routes while approved prefixes propagate with bounded state

Answer & Explanations

Correct answer: B

A.

The offered observation would test: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. It would not establish that the stated requirement has been met. The direct evidence needed here is: Load tests show timely real-failure detection and stable adjacency through expected delay variation.

B.

Direct verification: Load tests show timely real-failure detection and stable adjacency through expected delay variation. This is the relevant evidence for the action: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. The reason is: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

C.

The offered observation would test: Define prechange snapshots, staged checkpoints and objective rollback triggers for each dependency. It would not establish that the stated requirement has been met. The direct evidence needed here is: Load tests show timely real-failure detection and stable adjacency through expected delay variation.

D.

The offered observation would test: Apply explicit import and export prefix and AS-path policies plus maximum-prefix safeguards. It would not establish that the stated requirement has been met. The direct evidence needed here is: Load tests show timely real-failure detection and stable adjacency through expected delay variation.

Question 547

A network design team is assessing this customer situation: A network team enables very aggressive BFD detection across a congested transport circuit. Changes to security policy must be approved by an independent owner. Which failure is the most direct risk of taking the tempting design shortcut?

  1. A single control-plane fault can suppress route visibility across unrelated regions
  2. Traffic may exit through an unapproved path despite apparently healthy route adjacencies
  3. Spurious session failures can trigger widespread reconvergence during healthy transport
  4. A peer mistake can redirect sensitive traffic or exhaust routing resources

Answer & Explanations

Correct answer: C

A.

The offered consequence belongs to the alternative control path: Build redundant route-reflector clusters with policy-consistent hierarchy and independent failure domains. The relevant failure for the current situation is: Spurious session failures can trigger widespread reconvergence during healthy transport. The distinction follows from: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

B.

The offered consequence belongs to the alternative control path: Implement documented local preference and community policy at controlled BGP boundaries. The relevant failure for the current situation is: Spurious session failures can trigger widespread reconvergence during healthy transport. The distinction follows from: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

C.

Spurious session failures can trigger widespread reconvergence during healthy transport. That is the risk in the reported situation—A network team enables very aggressive BFD detection across a congested transport circuit. The corrective action is: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Technical basis: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

D.

The offered consequence belongs to the alternative control path: Apply explicit import and export prefix and AS-path policies plus maximum-prefix safeguards. The relevant failure for the current situation is: Spurious session failures can trigger widespread reconvergence during healthy transport. The distinction follows from: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

Question 548

A network design team is assessing this customer situation: A network team enables very aggressive BFD detection across a congested transport circuit. Changes to security policy must be approved by an independent owner. Which prerequisite should the architect confirm before choosing and defending this design?

  1. Define traffic classes, upstream policy, local preference scope and failover requirements
  2. Map site ownership, aggregate reachability, return paths and route-withdrawal behavior
  3. Capture team ownership, outage windows, fault domains and cross-module service needs
  4. Measure round-trip variation, peer scale, hardware BFD offload and convergence budget

Answer & Explanations

Correct answer: D

A.

The offered preparation belongs with the alternative action: Implement documented local preference and community policy at controlled BGP boundaries. Here the necessary starting condition is: Measure round-trip variation, peer scale, hardware BFD offload and convergence budget. It supports: Tune BFD intervals to measured platform and transport behavior with appropriate headroom.

B.

The offered preparation belongs with the alternative action: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. Here the necessary starting condition is: Measure round-trip variation, peer scale, hardware BFD offload and convergence budget. It supports: Tune BFD intervals to measured platform and transport behavior with appropriate headroom.

C.

The offered preparation belongs with the alternative action: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. Here the necessary starting condition is: Measure round-trip variation, peer scale, hardware BFD offload and convergence budget. It supports: Tune BFD intervals to measured platform and transport behavior with appropriate headroom.

D.

The necessary starting condition is: Measure round-trip variation, peer scale, hardware BFD offload and convergence budget. This enables the action: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Validate the result with: Load tests show timely real-failure detection and stable adjacency through expected delay variation.

Question 549

In a separate customer architecture review, this issue arises: A carrier requests rapid convergence but some edge platforms have limited BFD scaling capacity. The operational team has limited access to a remote carrier demarcation. Which high-level network design choice most directly meets the stated technical and operational requirement?

  1. Tune BFD intervals to measured platform and transport behavior with appropriate headroom
  2. Summarize at stable boundaries while retaining explicitly required more-specific exceptions
  3. Partition modules by failure, ownership and change cadence with carefully designed routed boundaries
  4. Limit access-layer L2 domains and use routed distribution boundaries with edge-loop safeguards

Answer & Explanations

Correct answer: A

A.

Tune BFD intervals to measured platform and transport behavior with appropriate headroom. The relevant technical reason is: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion. Confirm through: Load tests show timely real-failure detection and stable adjacency through expected delay variation.

B.

Aggregation reduces control-plane scale but indiscriminate masking can hide the only valid failure path. That supports the alternative intervention: Summarize at stable boundaries while retaining explicitly required more-specific exceptions. The present situation—A carrier requests rapid convergence but some edge platforms have limited BFD scaling capacity—instead calls for: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Technical basis: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

C.

The alternative addresses: Partition modules by failure, ownership and change cadence with carefully designed routed boundaries. Its principle is: Modularity limits correlated operational impact without eliminating necessary inter-module connectivity. In this case the needed action is: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. Confirm by: Load tests show timely real-failure detection and stable adjacency through expected delay variation.

D.

The alternative addresses a different technical concern: Smaller broadcast domains and loop controls constrain accidental Layer 2 topology changes. The governing mechanism here is: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion. Accordingly, use: Tune BFD intervals to measured platform and transport behavior with appropriate headroom.

Question 550

In a separate customer architecture review, this issue arises: A carrier requests rapid convergence but some edge platforms have limited BFD scaling capacity. The operational team has limited access to a remote carrier demarcation. Which technical rationale best explains the proposed design choice under these constraints?

  1. Explicit go/no-go measurements allow reversible progress before hidden state diverges too far
  2. Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion
  3. Redundant device counts are insufficient when resources share correlated failure modes
  4. BGP adjacency establishment does not validate route provenance or the intended business scope

Answer & Explanations

Correct answer: B

A.

The alternative principle is: Explicit go/no-go measurements allow reversible progress before hidden state diverges too far. It instead explains this action: Define prechange snapshots, staged checkpoints and objective rollback triggers for each dependency. For the present requirement, the controlling mechanism is: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

B.

Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion. This explains the action: Tune BFD intervals to measured platform and transport behavior with appropriate headroom. For the described facts—A carrier requests rapid convergence but some edge platforms have limited BFD scaling capacity—test the outcome through: Load tests show timely real-failure detection and stable adjacency through expected delay variation.

C.

The alternative principle is: Redundant device counts are insufficient when resources share correlated failure modes. It instead explains this action: Design independently powered, physically separated paths with tested software and device fate boundaries. For the present requirement, the controlling mechanism is: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

D.

The alternative principle is: BGP adjacency establishment does not validate route provenance or the intended business scope. It instead explains this action: Apply explicit import and export prefix and AS-path policies plus maximum-prefix safeguards. For the present requirement, the controlling mechanism is: Failure detection should be fast enough for objectives without causing false neighbor losses during transient congestion.

Cisco Certified Design Expert (400-007) Practice Tests