Practice Exams:

Cisco 400-007 Dumps

EXAM: Cisco Certified Design Expert
Verified By Experts
Premium Bundle
$19.99
$54.99 $74.98

400-007 Premium Bundle


  • Premium File 349 Questions & Answers
  • Study Guide 934 Pages

Cisco 400-007 Practice Test 15

Question 140

A network design team is assessing this customer situation: A campus IPv4 policy blocks prohibited destinations while IPv6 traffic takes an uninspected path. Capacity forecasts include a planned period of rapid site expansion. Which failure is the most direct risk of taking the tempting design shortcut?

  1. Critical routing packets are discarded and neighbors can fail during an avoidable control-plane event
  2. Repeated retries multiply resources and produce inconsistent forwarding or duplicate tunnels
  3. Users continue to suffer poor workflows despite apparently excellent infrastructure metrics
  4. Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance

Answer & Explanations

Correct answer: D

A.

The offered consequence belongs to the alternative control path: Design control-plane policing and exception capacity from observed legitimate protocol loads. The relevant failure for the current situation is: Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance. The distinction follows from: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior.

B.

The offered consequence belongs to the alternative control path: Design idempotent desired-state operations with change identifiers and safe reconciliation. The relevant failure for the current situation is: Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance. The distinction follows from: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior.

C.

The offered consequence belongs to the alternative control path: Measure the full user transaction across DNS, authentication, network and application stages. The relevant failure for the current situation is: Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance. The distinction follows from: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior.

D.

Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance. That is the risk in the reported situation—A campus IPv4 policy blocks prohibited destinations while IPv6 traffic takes an uninspected path. The corrective action is: Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end. Technical basis: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior.

Question 141

In a separate customer architecture review, this issue arises: A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4. Both IPv4 and IPv6 must receive equivalent routing and security treatment. Which technical rationale best explains the proposed design choice under these constraints?

  1. Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior
  2. Routing adjacencies and management functions need protected CPU budgets separate from bulk forwarding traffic
  3. Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions
  4. Device health counters alone do not demonstrate end-to-end service behavior

Answer & Explanations

Correct answer: A

A.

Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior. This explains the action: Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end. For the described facts—A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4—test the outcome through: Matched IPv4 and IPv6 test cases traverse the intended controls and show comparable application outcomes.

B.

The alternative principle is: Routing adjacencies and management functions need protected CPU budgets separate from bulk forwarding traffic. It instead explains this action: Design control-plane policing and exception capacity from observed legitimate protocol loads. For the present requirement, the controlling mechanism is: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior.

C.

The alternative principle is: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions. It instead explains this action: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. For the present requirement, the controlling mechanism is: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior. The scenario is: A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4.

D.

The alternative principle is: Device health counters alone do not demonstrate end-to-end service behavior. It instead explains this action: Design an observability matrix linking service SLOs, path probes, flow data and device events. For the present requirement, the controlling mechanism is: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior. The scenario is: A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4.

Question 142

In a separate customer architecture review, this issue arises: A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4. Both IPv4 and IPv6 must receive equivalent routing and security treatment. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?

  1. Two identical deployment runs leave one policy set and produce an auditable no-op on the second run
  2. Matched IPv4 and IPv6 test cases traverse the intended controls and show comparable application outcomes
  3. A constrained-load test preserves essential BGP and routing health while dropping excess punt traffic
  4. A two-way test flow passes inspection with matched session state through path failover

Answer & Explanations

Correct answer: B

A.

The offered observation would test: Design idempotent desired-state operations with change identifiers and safe reconciliation. It would not establish that the stated requirement has been met. The direct evidence needed here is: Matched IPv4 and IPv6 test cases traverse the intended controls and show comparable application outcomes.

B.

Direct verification: Matched IPv4 and IPv6 test cases traverse the intended controls and show comparable application outcomes. This is the relevant evidence for the action: Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end. The reason is: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior. The scenario is: A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4.

C.

The offered observation would test: Design control-plane policing and exception capacity from observed legitimate protocol loads. It would not establish that the stated requirement has been met. The direct evidence needed here is: Matched IPv4 and IPv6 test cases traverse the intended controls and show comparable application outcomes. The scenario is: A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4.

D.

The offered observation would test: Design route symmetry or approved distributed state sharing around stateful inspection points. It would not establish that the stated requirement has been met. The direct evidence needed here is: Matched IPv4 and IPv6 test cases traverse the intended controls and show comparable application outcomes.

Question 143

In a separate customer architecture review, this issue arises: A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4. Both IPv4 and IPv6 must receive equivalent routing and security treatment. Which failure is the most direct risk of taking the tempting design shortcut?

  1. Routing degradation can remain invisible while dashboards show all interfaces green
  2. Operational errors and control-plane state can grow faster than deployment capacity
  3. Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance
  4. Valid application sessions fail intermittently when traffic returns through a different stateful device

Answer & Explanations

Correct answer: C

A.

The offered consequence belongs to the alternative control path: Design an observability matrix linking service SLOs, path probes, flow data and device events. The relevant failure for the current situation is: Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance. The distinction follows from: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior.

B.

The offered consequence belongs to the alternative control path: Partition routing domains or apply hierarchy while standardizing policy templates and validation. The relevant failure for the current situation is: Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance. The distinction follows from: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior.

C.

Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance. That is the risk in the reported situation—A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4. The corrective action is: Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end. Technical basis: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior.

D.

The offered consequence belongs to the alternative control path: Design route symmetry or approved distributed state sharing around stateful inspection points. The relevant failure for the current situation is: Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance. The distinction follows from: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior.

Question 144

In a separate customer architecture review, this issue arises: A branch cutover enables IPv6 on clients but its traffic-engineering and firewall rules cover only IPv4. Both IPv4 and IPv6 must receive equivalent routing and security treatment. Which prerequisite should the architect confirm before choosing and defending this design?

  1. Define end-to-end SLOs, sensor placement, retention, sampling and correlation keys
  2. Map forward and reverse routes, state replication capability and routing failure behavior
  3. Measure peer count, routes, update frequency, device memory and policy ownership
  4. Inventory both address families, routing advertisements, telemetry and security policy semantics

Answer & Explanations

Correct answer: D

A.

The offered preparation belongs with the alternative action: Design an observability matrix linking service SLOs, path probes, flow data and device events. Here the necessary starting condition is: Inventory both address families, routing advertisements, telemetry and security policy semantics. It supports: Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end.

B.

The offered preparation belongs with the alternative action: Design route symmetry or approved distributed state sharing around stateful inspection points. Here the necessary starting condition is: Inventory both address families, routing advertisements, telemetry and security policy semantics. It supports: Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end.

C.

The offered preparation belongs with the alternative action: Partition routing domains or apply hierarchy while standardizing policy templates and validation. Here the necessary starting condition is: Inventory both address families, routing advertisements, telemetry and security policy semantics. It supports: Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end.

D.

The necessary starting condition is: Inventory both address families, routing advertisements, telemetry and security policy semantics. This enables the action: Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end. Validate the result with: Matched IPv4 and IPv6 test cases traverse the intended controls and show comparable application outcomes.

Question 145

A network design team is assessing this customer situation: Several customers share carrier-grade translation and incident attribution depends on a public address. The network is in an incremental migration with old and new paths both active. Which high-level network design choice most directly meets the stated technical and operational requirement?

  1. Preserve translation state and time-synchronized flow identity through the chosen NAT topology
  2. Design idempotent desired-state operations with change identifiers and safe reconciliation
  3. Size forwarding resources and validate ACL and QoS scale in hardware for the chosen platform
  4. Select packet and flow observation methods by temporal resolution and evidence needs

Answer & Explanations

Correct answer: A

A.

Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions. First establish the prerequisite: Record address and port pools, mapping retention, session state behavior and time synchronization. The proposed response is: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. Validation: A failover test ties a connection to translation records and preserves the expected response path.

B.

The alternative addresses: Design idempotent desired-state operations with change identifiers and safe reconciliation. Its principle is: Retry behavior must converge on one intended state rather than duplicate stateful resources. In this case the needed action is: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. Confirm by: A failover test ties a connection to translation records and preserves the expected response path.

C.

The alternative addresses a different technical concern: Data-plane capacity and TCAM limits can differ from configuration parser acceptance. The governing mechanism here is: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions. Accordingly, use: Preserve translation state and time-synchronized flow identity through the chosen NAT topology.

D.

Sampled aggregates can omit rare or very short events and cannot reconstruct missing packet payloads. That supports the alternative intervention: Select packet and flow observation methods by temporal resolution and evidence needs. The present situation—Several customers share carrier-grade translation and incident attribution depends on a public address—instead calls for: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. Technical basis: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

Question 146

A network design team is assessing this customer situation: Several customers share carrier-grade translation and incident attribution depends on a public address. The network is in an incremental migration with old and new paths both active. Which acceptance result would most convincingly demonstrate that the design addresses the critical requirement?

  1. A measured branch-to-SaaS session meets transaction latency and security policy after hub failure
  2. A failover test ties a connection to translation records and preserves the expected response path
  3. A scaled lab test installs the full policy set in hardware and meets forwarding latency and drop targets
  4. Bidirectional maximum-size application flows succeed with no unexpected fragmentation or PMTU stalls

Answer & Explanations

Correct answer: B

A.

The offered observation would test: Use policy-controlled local SaaS breakout with identity and security enforcement near the branch. It would not establish that the stated requirement has been met. The direct evidence needed here is: A failover test ties a connection to translation records and preserves the expected response path.

B.

Direct verification: A failover test ties a connection to translation records and preserves the expected response path. This is the relevant evidence for the action: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. The reason is: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

C.

The offered observation would test: Size forwarding resources and validate ACL and QoS scale in hardware for the chosen platform. It would not establish that the stated requirement has been met. The direct evidence needed here is: A failover test ties a connection to translation records and preserves the expected response path.

D.

The offered observation would test: Budget encapsulation overhead and enforce path MTU discovery or appropriate underlay sizing. It would not establish that the stated requirement has been met. The direct evidence needed here is: A failover test ties a connection to translation records and preserves the expected response path.

Question 147

A network design team is assessing this customer situation: Several customers share carrier-grade translation and incident attribution depends on a public address. The network is in an incremental migration with old and new paths both active. Which failure is the most direct risk of taking the tempting design shortcut?

  1. Uninspected IPv6 access bypasses policy despite apparent IPv4 control compliance
  2. An ordinary data-plane compromise can expand directly into privileged network control
  3. Attribution becomes ambiguous and surviving connections may be rejected after gateway failover
  4. Repeated retries multiply resources and produce inconsistent forwarding or duplicate tunnels

Answer & Explanations

Correct answer: C

A.

The offered consequence belongs to the alternative control path: Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end. The relevant failure for the current situation is: Attribution becomes ambiguous and surviving connections may be rejected after gateway failover. The distinction follows from: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

B.

The offered consequence belongs to the alternative control path: Use separately authenticated management paths with restricted reachability and break-glass access. The relevant failure for the current situation is: Attribution becomes ambiguous and surviving connections may be rejected after gateway failover. The distinction follows from: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

C.

Attribution becomes ambiguous and surviving connections may be rejected after gateway failover. That is the risk in the reported situation—Several customers share carrier-grade translation and incident attribution depends on a public address. The corrective action is: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. Technical basis: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

D.

The offered consequence belongs to the alternative control path: Design idempotent desired-state operations with change identifiers and safe reconciliation. The relevant failure for the current situation is: Attribution becomes ambiguous and surviving connections may be rejected after gateway failover. The distinction follows from: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

Question 148

A network design team is assessing this customer situation: Several customers share carrier-grade translation and incident attribution depends on a public address. The network is in an incremental migration with old and new paths both active. Which prerequisite should the architect confirm before choosing and defending this design?

  1. Catalog YANG and API support, commit behavior, desired-state ownership and rollback hooks
  2. Check tunnel overhead, actual interface MTUs, ICMPv4/ICMPv6 reachability and endpoint behavior
  3. Define resource identity, reconciliation rules, partial-failure behavior and audit logging
  4. Record address and port pools, mapping retention, session state behavior and time synchronization

Answer & Explanations

Correct answer: D

A.

The offered preparation belongs with the alternative action: Use transactional configuration with prechecks, commit confirmation and explicit state verification. Here the necessary starting condition is: Record address and port pools, mapping retention, session state behavior and time synchronization. It supports: Preserve translation state and time-synchronized flow identity through the chosen NAT topology.

B.

The offered preparation belongs with the alternative action: Budget encapsulation overhead and enforce path MTU discovery or appropriate underlay sizing. Here the necessary starting condition is: Record address and port pools, mapping retention, session state behavior and time synchronization. It supports: Preserve translation state and time-synchronized flow identity through the chosen NAT topology.

C.

The offered preparation belongs with the alternative action: Design idempotent desired-state operations with change identifiers and safe reconciliation. Here the necessary starting condition is: Record address and port pools, mapping retention, session state behavior and time synchronization. It supports: Preserve translation state and time-synchronized flow identity through the chosen NAT topology.

D.

The necessary starting condition is: Record address and port pools, mapping retention, session state behavior and time synchronization. This enables the action: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. Validate the result with: A failover test ties a connection to translation records and preserves the expected response path.

Question 149

In a separate customer architecture review, this issue arises: An enterprise shifts NAT gateways during failover and a partner cannot correlate return sessions. Physical-path diversity has not yet been independently checked. Which high-level network design choice most directly meets the stated technical and operational requirement?

  1. Preserve translation state and time-synchronized flow identity through the chosen NAT topology
  2. Design comparable IPv4 and IPv6 path, inspection and segmentation policies end to end
  3. Budget encapsulation overhead and enforce path MTU discovery or appropriate underlay sizing
  4. Use transactional configuration with prechecks, commit confirmation and explicit state verification

Answer & Explanations

Correct answer: A

A.

Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions. For the documented situation—An enterprise shifts NAT gateways during failover and a partner cannot correlate return sessions—the targeted response is: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. Check: A failover test ties a connection to translation records and preserves the expected response path.

B.

The alternative addresses a different technical concern: Dual-stack endpoints can choose either address family, so protecting only one creates inconsistent behavior. The governing mechanism here is: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions. Accordingly, use: Preserve translation state and time-synchronized flow identity through the chosen NAT topology.

C.

Overlay headers reduce usable payload; blocking needed ICMP messages can create packet-size black holes. That supports the alternative intervention: Budget encapsulation overhead and enforce path MTU discovery or appropriate underlay sizing. The present situation—An enterprise shifts NAT gateways during failover and a partner cannot correlate return sessions—instead calls for: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. Technical basis: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

D.

The alternative addresses: Use transactional configuration with prechecks, commit confirmation and explicit state verification. Its principle is: API acceptance is not the same as converged network behavior; commit and validation semantics vary by platform. In this case the needed action is: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. Confirm by: A failover test ties a connection to translation records and preserves the expected response path.

Question 150

In a separate customer architecture review, this issue arises: An enterprise shifts NAT gateways during failover and a partner cannot correlate return sessions. Physical-path diversity has not yet been independently checked. Which technical rationale best explains the proposed design choice under these constraints?

  1. An isolated management plane reduces attack surface and survives failures on customer forwarding segments
  2. Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions
  3. Retry behavior must converge on one intended state rather than duplicate stateful resources
  4. Sampled aggregates can omit rare or very short events and cannot reconstruct missing packet payloads

Answer & Explanations

Correct answer: B

A.

The alternative principle is: An isolated management plane reduces attack surface and survives failures on customer forwarding segments. It instead explains this action: Use separately authenticated management paths with restricted reachability and break-glass access. For the present requirement, the controlling mechanism is: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

B.

Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions. This explains the action: Preserve translation state and time-synchronized flow identity through the chosen NAT topology. For the described facts—An enterprise shifts NAT gateways during failover and a partner cannot correlate return sessions—test the outcome through: A failover test ties a connection to translation records and preserves the expected response path.

C.

The alternative principle is: Retry behavior must converge on one intended state rather than duplicate stateful resources. It instead explains this action: Design idempotent desired-state operations with change identifiers and safe reconciliation. For the present requirement, the controlling mechanism is: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

D.

The alternative principle is: Sampled aggregates can omit rare or very short events and cannot reconstruct missing packet payloads. It instead explains this action: Select packet and flow observation methods by temporal resolution and evidence needs. For the present requirement, the controlling mechanism is: Address reuse and translation alter observable tuples; robust return paths and logs need mapped sessions.

Cisco Certified Design Expert (400-007) Practice Tests