Checkpoint 156-315.82 Dumps
Checkpoint 156-315.82 Practice Test 53
Question 520
A university wants a repeatable event report comparing two controlled test periods without mixing unrelated gateway traffic. Which combined implementation and verification plan is the best match for this workload?
Answer & Explanations
Correct answer: D
The action is applicable: Generate an approved SmartEvent report based on a documented event type, time window and relevant gateway sources, validate underlying records and share only through controlled reporting channels. But its proposed test—Generate a controlled series of test events that meets the rule's time window and count, confirm a single actionable alert is issued, and verify low-volume benign samples do not trigger it.—addresses “Create a SmartEvent event rule for a measurable high-severity pattern”. This requirement is confirmed instead by: Select a controlled test incident period, generate the report, cross-check sampled event IDs with source logs and verify an authorized viewer can retrieve the same scoped result.
The test would be relevant: Select a controlled test incident period, generate the report, cross-check sampled event IDs with source logs and verify an authorized viewer can retrieve the same scoped result. But the offered implementation—Define a supported SmartEvent event rule for a specific repeated high-severity security pattern, set suitable correlation criteria and alert thresholds, then test it with safe synthetic logs.—addresses “Create a SmartEvent event rule for a measurable high-severity pattern”. The action needed here is: Generate an approved SmartEvent report based on a documented event type, time window and relevant gateway sources, validate underlying records and share only through controlled reporting channels.
This action/test pair addresses “Route SmartEvent critical alerts to an authorized responder workflow”. Configure alert action and reporting destinations for approved SmartEvent high-priority events, set clear ownership and escalation criteria, and verify notifications arrive without exposing sensitive logs to unapproved recipients. Trigger a harmless sample critical event in a test environment, verify the expected on-call group receives the approved alert and a noncritical event does not page unrelated staff. The case instead calls for: Generate an approved SmartEvent report based on a documented event type, time window and relevant gateway sources, validate underlying records and share only through controlled reporting channels.
The question is set in this situation: A university wants a repeatable event report comparing two controlled test periods without mixing unrelated gateway traffic. Generate an approved SmartEvent report based on a documented event type, time window and relevant gateway sources, validate underlying records and share only through controlled reporting channels. Confirm it through this test: Select a controlled test incident period, generate the report, cross-check sampled event IDs with source logs and verify an authorized viewer can retrieve the same scoped result. An event report summarizes selected correlated evidence; an arbitrary exported chart cannot prove scope or accuracy without the correct event filter and source logs.
Question 521
A credit union is beginning regular Check Point compliance checks and needs to separate security-best-practice assessments from incident counts. Which Check Point R82 security engineering action best addresses this requirement?
Answer & Explanations
Correct answer: D
Configure alert action and reporting destinations for approved SmartEvent high-priority events, set clear ownership and escalation criteria, and verify notifications arrive without exposing sensitive logs to unapproved recipients. This addresses “Route SmartEvent critical alerts to an authorized responder workflow”, where the governing principle is: Creating a visible event in SmartEvent is not the same as routing a notification to on-call staff, and unreviewed distribution lists can reveal confidential security details. The stated case instead calls for: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
Review the Compliance Blade's relevant regulatory requirements and associated security controls, generate a scoped compliance report and validate which actual configuration findings support each score. This addresses “Map Compliance Blade scores to applicable regulatory controls and evidence”, where the governing principle is: Regulatory reporting maps evaluated security configurations to a framework, but a numerical compliance score alone does not equal comprehensive legal certification or prove the organization meets every external obligation. The stated case instead calls for: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
Create accountable remediation work for supported Compliance Blade findings, use authorized policy change review and measure the updated result rather than hiding a failed check or disabling the assessment. This addresses “Track remediation of compliance findings without hiding critical alerts”, where the governing principle is: Compliance checks surface configuration drift and best-practice gaps; suppressing a finding changes visibility but does not necessarily remove its underlying risk. The stated case instead calls for: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures. Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met. Verify the result with this test: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
Question 522
A credit union is beginning regular Check Point compliance checks and needs to separate security-best-practice assessments from incident counts. The engineer proposes the following change: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures. Which mechanism explains why it works?
Answer & Explanations
Correct answer: B
Creating a visible event in SmartEvent is not the same as routing a notification to on-call staff, and unreviewed distribution lists can reveal confidential security details. That explains “Route SmartEvent critical alerts to an authorized responder workflow”, not the mechanism behind the described change. The relevant principle is: Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met. The corresponding implementation is: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
Compliance checks surface configuration drift and best-practice gaps; suppressing a finding changes visibility but does not necessarily remove its underlying risk. That explains “Track remediation of compliance findings without hiding critical alerts”, not the mechanism behind the described change. The relevant principle is: Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
Regulatory reporting maps evaluated security configurations to a framework, but a numerical compliance score alone does not equal comprehensive legal certification or prove the organization meets every external obligation. That explains “Map Compliance Blade scores to applicable regulatory controls and evidence”, not the mechanism behind the described change. The relevant principle is: Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
Question 523
A credit union is beginning regular Check Point compliance checks and needs to separate security-best-practice assessments from incident counts. After implementing this change—Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.—which test most directly validates its intended outcome?
Answer & Explanations
Correct answer: A
Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected. This check is decisive because compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
Record the initial test finding, apply a narrow reviewed policy correction, rerun the compliance assessment and verify that the actual configuration and associated finding both reflect remediation. That would help test “Track remediation of compliance findings without hiding critical alerts”, not the outcome required in this scenario. The relevant acceptance check is: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
Generate a controlled compliance report for a selected regulatory category, trace sampled failed controls to gateway configuration and confirm an approved correction changes the appropriate finding. That would help test “Map Compliance Blade scores to applicable regulatory controls and evidence”, not the outcome required in this scenario. The relevant acceptance check is: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
Trigger a harmless sample critical event in a test environment, verify the expected on-call group receives the approved alert and a noncritical event does not page unrelated staff. That would help test “Route SmartEvent critical alerts to an authorized responder workflow”, not the outcome required in this scenario. The relevant acceptance check is: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
Question 524
A credit union is beginning regular Check Point compliance checks and needs to separate security-best-practice assessments from incident counts. Which proposed shortcut most directly risks undetected policy configuration weaknesses after using operational log quietness as a substitute for compliance evaluation and should therefore be rejected?
Answer & Explanations
Correct answer: C
Disable Compliance Blade scoring whenever a security-best-practice finding lowers the dashboard percentage and claim the underlying configuration issue is now resolved. That shortcut risks persistent unsafe gateway configuration after measuring success by hiding assessment findings rather than fixing them. Here the specific shortcut is: Treat absence of SmartEvent threat alerts as proof that every gateway complies with all regulatory requirements without enabling or reviewing Compliance assessments.
Send a single compliance percentage to an auditor and claim it legally certifies every privacy and security requirement regardless of unevaluated operational processes. That shortcut risks overstated compliance claims after reporting a tool score without checking its covered controls and limitations. Here the specific shortcut is: Treat absence of SmartEvent threat alerts as proof that every gateway complies with all regulatory requirements without enabling or reviewing Compliance assessments.
Treat absence of SmartEvent threat alerts as proof that every gateway complies with all regulatory requirements without enabling or reviewing Compliance assessments. The foreseeable failure is undetected policy configuration weaknesses after using operational log quietness as a substitute for compliance evaluation. The safer response is: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
Assume opening a SmartEvent dashboard every morning is equivalent to a tested urgent alert notification and incident escalation procedure. That shortcut risks slow response to critical security incidents after relying on passive monitoring without validated notifications. Here the specific shortcut is: Treat absence of SmartEvent threat alerts as proof that every gateway complies with all regulatory requirements without enabling or reviewing Compliance assessments.
Question 525
A credit union is beginning regular Check Point compliance checks and needs to separate security-best-practice assessments from incident counts. Which combined implementation and verification plan is the best match for this workload?
Answer & Explanations
Correct answer: C
This action/test pair addresses “Track remediation of compliance findings without hiding critical alerts”. Create accountable remediation work for supported Compliance Blade findings, use authorized policy change review and measure the updated result rather than hiding a failed check or disabling the assessment. Record the initial test finding, apply a narrow reviewed policy correction, rerun the compliance assessment and verify that the actual configuration and associated finding both reflect remediation. The case instead calls for: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
The action is applicable: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures. But its proposed test—Generate a controlled compliance report for a selected regulatory category, trace sampled failed controls to gateway configuration and confirm an approved correction changes the appropriate finding.—addresses “Map Compliance Blade scores to applicable regulatory controls and evidence”. This requirement is confirmed instead by: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures. Confirm it through this test: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected. Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
The test would be relevant: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected. But the offered implementation—Review the Compliance Blade's relevant regulatory requirements and associated security controls, generate a scoped compliance report and validate which actual configuration findings support each score.—addresses “Map Compliance Blade scores to applicable regulatory controls and evidence”. The action needed here is: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
Question 526
A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Which Check Point R82 security engineering action best addresses this requirement?
Answer & Explanations
Correct answer: B
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Review the Compliance Blade's relevant regulatory requirements and associated security controls, generate a scoped compliance report and validate which actual configuration findings support each score. This addresses “Map Compliance Blade scores to applicable regulatory controls and evidence”, where the governing principle is: Regulatory reporting maps evaluated security configurations to a framework, but a numerical compliance score alone does not equal comprehensive legal certification or prove the organization meets every external obligation. The stated case instead calls for: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures. Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met. Verify the result with this test: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
Grant security analysts the appropriate permissions to view and investigate events without unnecessarily giving them policy administration or management-server upgrade rights, then verify event access from a nonadmin account. This addresses “Scope SmartEvent access separately from security policy editing privileges”, where the governing principle is: Monitoring visibility and policy-control capabilities are separate operational duties; an account able to open reports should not automatically gain unrestricted authority over gateway configuration. The stated case instead calls for: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Create accountable remediation work for supported Compliance Blade findings, use authorized policy change review and measure the updated result rather than hiding a failed check or disabling the assessment. This addresses “Track remediation of compliance findings without hiding critical alerts”, where the governing principle is: Compliance checks surface configuration drift and best-practice gaps; suppressing a finding changes visibility but does not necessarily remove its underlying risk. The stated case instead calls for: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
Question 527
A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. The engineer proposes the following change: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures. Which mechanism explains why it works?
Answer & Explanations
Correct answer: D
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Regulatory reporting maps evaluated security configurations to a framework, but a numerical compliance score alone does not equal comprehensive legal certification or prove the organization meets every external obligation. That explains “Map Compliance Blade scores to applicable regulatory controls and evidence”, not the mechanism behind the described change. The relevant principle is: Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Compliance checks surface configuration drift and best-practice gaps; suppressing a finding changes visibility but does not necessarily remove its underlying risk. That explains “Track remediation of compliance findings without hiding critical alerts”, not the mechanism behind the described change. The relevant principle is: Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
Monitoring visibility and policy-control capabilities are separate operational duties; an account able to open reports should not automatically gain unrestricted authority over gateway configuration. That explains “Scope SmartEvent access separately from security policy editing privileges”, not the mechanism behind the described change. The relevant principle is: Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met. The corresponding implementation is: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
Question 528
A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. After implementing this change—Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.—which test most directly validates its intended outcome?
Answer & Explanations
Correct answer: A
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected. This check is decisive because compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
Sign in as a test analyst, open approved SmartEvent reports and alert details, attempt an unrelated policy modification and verify it remains denied. That would help test “Scope SmartEvent access separately from security policy editing privileges”, not the outcome required in this scenario. The relevant acceptance check is: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Generate a controlled compliance report for a selected regulatory category, trace sampled failed controls to gateway configuration and confirm an approved correction changes the appropriate finding. That would help test “Map Compliance Blade scores to applicable regulatory controls and evidence”, not the outcome required in this scenario. The relevant acceptance check is: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Record the initial test finding, apply a narrow reviewed policy correction, rerun the compliance assessment and verify that the actual configuration and associated finding both reflect remediation. That would help test “Track remediation of compliance findings without hiding critical alerts”, not the outcome required in this scenario. The relevant acceptance check is: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
Question 529
A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Which proposed shortcut most directly risks undetected policy configuration weaknesses after using operational log quietness as a substitute for compliance evaluation and should therefore be rejected?
Answer & Explanations
Correct answer: A
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Treat absence of SmartEvent threat alerts as proof that every gateway complies with all regulatory requirements without enabling or reviewing Compliance assessments. The foreseeable failure is undetected policy configuration weaknesses after using operational log quietness as a substitute for compliance evaluation. The safer response is: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Send a single compliance percentage to an auditor and claim it legally certifies every privacy and security requirement regardless of unevaluated operational processes. That shortcut risks overstated compliance claims after reporting a tool score without checking its covered controls and limitations. Here the specific shortcut is: Treat absence of SmartEvent threat alerts as proof that every gateway complies with all regulatory requirements without enabling or reviewing Compliance assessments.
Give all event-monitoring analysts administrator-level access to every Quantum gateway because they need to read SmartEvent dashboards. That shortcut risks unnecessary administrative privilege expansion caused by conflating event analysis and enforcement configuration. Here the specific shortcut is: Treat absence of SmartEvent threat alerts as proof that every gateway complies with all regulatory requirements without enabling or reviewing Compliance assessments.
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Disable Compliance Blade scoring whenever a security-best-practice finding lowers the dashboard percentage and claim the underlying configuration issue is now resolved. That shortcut risks persistent unsafe gateway configuration after measuring success by hiding assessment findings rather than fixing them. Here the specific shortcut is: Treat absence of SmartEvent threat alerts as proof that every gateway complies with all regulatory requirements without enabling or reviewing Compliance assessments.
Question 530
A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Which combined implementation and verification plan is the best match for this workload?
Answer & Explanations
Correct answer: C
The test would be relevant: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected. But the offered implementation—Create accountable remediation work for supported Compliance Blade findings, use authorized policy change review and measure the updated result rather than hiding a failed check or disabling the assessment.—addresses “Track remediation of compliance findings without hiding critical alerts”. The action needed here is: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
The action is applicable: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures. But its proposed test—Record the initial test finding, apply a narrow reviewed policy correction, rerun the compliance assessment and verify that the actual configuration and associated finding both reflect remediation.—addresses “Track remediation of compliance findings without hiding critical alerts”. This requirement is confirmed instead by: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected.
The question is set in this situation: A government agency wants evidence that a risky permissive rule is identified by its applicable compliance assessment before changing the rule. Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures. Confirm it through this test: Inspect a controlled noncompliant test setting, locate its Compliance finding and recommended remediation, apply a reviewed change, then verify the score or finding updates as expected. Compliance assessment compares configuration against defined best-practice controls; a green monitoring uptime graph does not demonstrate that policy hardening or regulatory requirements have been met.
This action/test pair addresses “Map Compliance Blade scores to applicable regulatory controls and evidence”. Review the Compliance Blade's relevant regulatory requirements and associated security controls, generate a scoped compliance report and validate which actual configuration findings support each score. Generate a controlled compliance report for a selected regulatory category, trace sampled failed controls to gateway configuration and confirm an approved correction changes the appropriate finding. The case instead calls for: Enable the supported R82 Compliance Blade assessment of managed security policy and gateway configuration, review relevant Security Best Practice findings and remediate validated risks through approved policy change procedures.
Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests
- Checkpoint 156-315.82 Practice Test 51 - 10 Questions (Last Reviewed 28-Sep-2026)
- Checkpoint 156-315.82 Practice Test 52 - 10 Questions (Last Reviewed 27-Sep-2026)
- Checkpoint 156-315.82 Practice Test 53 - 10 Questions (Last Reviewed 26-Sep-2026)
- Checkpoint 156-315.82 Practice Test 54 - 10 Questions (Last Reviewed 25-Sep-2026)
- Checkpoint 156-315.82 Practice Test 55 - 10 Questions (Last Reviewed 24-Sep-2026)